Presentations -
-
Improvement and Evaluation of High-Speed Attitude Maneuver Performance Using Two-Degree-of-Freedom Control System
Proceedings of the Technical Meeting on Mechatronics Control, IEE Japan, MEC-20-031, 55-57
-
Characteristics of Break-Fall Movement in Judo and Consideration for Their Engineering Applications
Proceedings of the Mechanical Engineering Congress, 2020 Japan, No.20-1, J23103
-
Project-Based Learning Based on Flying Robot Production in Mechanical and Aerospace Engineering Department
Proceedings of the Mechanical Engineering Congress, 2020 Japan, No.20-1, S20202
-
Toward the Realization of Mid-Air Retrieval of Low-Speed-Descent Objects by Means of Fixed-Wing UAVs
Proceedings of the 2020 JSME Conference on Robotics and Mechatronics, No.20-2, 2A1-B12
-
Proposal of a Rebound Reduction Mechanism on Multicopter Landing
Proceedings of the JSME Tokai Branch 69th Annual Meeting (Tokai Engineering Complex 2020, TEC20), No.203-1, 414
-
SMA Actuator Model Construction Under Vacuum Environment for Driving Time Control
Proceedings of the JSME Tokai Branch 69th Annual Meeting (Tokai Engineering Complex 2020, TEC20), No.203-1, 211
-
On Flying Study Materials for Project-Based Learning in Mechanical and Aerospace Engineering Department
Proceedings of the JSME Tokai Branch 69th Annual Meeting (Tokai Engineering Complex 2020, TEC20), No.203-1, 415
-
Control System Design for Asteroid Tracking and Imaging System During a Flyby
Proceedings of the 20th Space Science Symposium, P 1.34
-
Effects of Dynamic Aero-forces Generated by Vehicle Motion at the Heave and Pitch Response in Running Automobile
Proceedings of the 20th SICE System Integration Division Conference (SI 2019), 292-295
-
Flexible Trajectory Generation Method Satisfying Variable Target Final States - A FSC Application Method Mitigating Sudden Change of Control Inputs -
Proceedings of the 20th SICE System Integration Division Conference (SI 2019), 280-284
-
On Trajectory Optimization Method for Kinetic Impactor to Deflect Earth Threatening Asteroids Using Impact-Geometry Maps
Proceedings of the 63rd Space Sciences and Technology Conference, JSASS-2019-4620
-
Development of Flying Robot for Project-Based Learning in Mechanical and Aerospace Engineering Department
Proceedings of the Mechanical Engineering Congress, 2019 Japan, No.19-1, S20225
-
Preliminary Study on Visual Based Tracking System for Asteroid Flyby
Proceedings of the Technical Meeting on Mechatronics Control, IEE Japan, MEC-19-014, 79-82
-
Multibody Dynamics Based Modeling of Self-Standable Motorcycle
Proceedings of the JSME Tokai Branch 68th Annual Meeting (Tokai Engineering Complex 2019, TEC19), No.193-1, 312
-
Proposal of Response-Adaptive-type Variable Stiffness Mechanism for Shock Response Control - It's Application to Tipping-Over Avoidance of Celestial Exploration Lander -
Proceedings of the 19th SICE System Integration Division Conference (SI 2018), 1140-1145
-
Holding of Symposium on Supporting Women's Carrier Design for Mechanical and Aerospace Engineering (Toward Engineers Organizations Including Visible and Invisible Flexibility)
Proceedings of the 19th SICE System Integration Division Conference (SI 2018), 1138-1139
-
An Experimental System for Control Engineering Lecture Following Experiential Lecture on Vibration Engineering Using Real Building Shaking
Proceedings of the 61st Japan Joint Automatic Control Conference, 1568-1571
-
Optimized Operations Planning and Scheduling of Microsatellites Based on Battery State Estimation Satisfying State of Charge Constraint
Proceedings of the 55th JSASS Autumn Joint Conference of Chubu and Kansai Branches, B02
-
(English title does not appear.)
Proceedings of the 62nd Space Sciences and Technology Conference, JSASS-2018-4062
-
Study on a Trajectory Optimization Method of Spacecraft for Asteroid Deflection Exploiting Impact Geometry Map
Proceedings of the 62nd Space Sciences and Technology Conference, JSASS-2018-4677