Papers - SHAMOTO Eiji
-
Investigation of tool wear suppression in ultraprecision diamond machining of die steel
Yilong Wang, Norikazu Suzuki, Eiji Shamoto, Qingliang Zhao
Precision Engineering Vol. 35 page： 677- 685 2011.10
-
Microfluidic baker's transformation device for three-dimensional rapid mixing Reviewed
Takao Yasui, Yusuke Omoto, Keiko Osato, Noritada Kaji, Norikazu Suzuki, Toyohiro Naito, Masaki Watanabe, Yukihiro Okamoto, Manabu Tokeshi, Eiji Shamoto, Yoshinobu Baba
Lab on a Chip Vol. 11 ( 19 ) page： 3356 - 3360 2011.8
-
Prediction and Compensation of Motion Accuracy in a Linear Motion Bearing Table Reviewed
Gyungho Khim, Chun Hong Park, Eiji Shamoto, and Seung Woo Kim
Precision Engineering Vol. 35 page： 393-399 2011.7
-
Studies on Continuous Chip Disposal and Chip-Pulling Cutting - Challenge to Chip Control by Changing Shape of Rake Face Reviewed Open Access
Eiji Shamoto, Koichiro Yasuda, Tomoya Aoki, Norikazu Suzuki, Tomio Koide
Vol. 77 ( 5 ) page： 520-524 2011.5
-
Dynamic Finite Element Analysis of Contact Stress in CMP Process Reviewed Open Access
Yohei Hashimoto, Norikazu Suzuki, Rei Hino, Eiji Shamoto
Vol. 77 ( 5 ) page： 513-519 2011.5
-
Control of chip flow with guide grooves for continuous chip disposal and chip-pulling turning Reviewed
Eiji Shamoto, Tomoya Aoki, Burak Sencer, Norikazu Suzuki, Rei Hino, Tomio Koide
CIRP Annals-Manufacturing Technology Vol. 60 page： 125-128 2011.5
-
Ultraprecision sculpturing of hardened steel by applying elliptical vibration cutting Reviewed
Norikazu Suzuki, Eiji Shamoto
page： 52-57 2011.3
-
Simultaneous double-sided milling of flexible plates with high accuracy and high efficiency -Suppression of forced chatter vibration with synchronized single-tooth cutters Reviewed
Tatsuya Mori, Tomoki Hiramatsu, Eiji Shamoto
Precision Engineering Vol. 35 page： 416-423 2011.2
-
Chatter Stability Limits in End Milling with Anisotropic Flexible Tools- Construction of Analytical Model with Consideration of Tool Inclination around Cutting Feed Direction Reviewed Open Access
Yusuke Kurata, Norikazu Suzuki, Rei Hino, Eiji Shamoto
Vol. 77 ( 1 ) page： 97-104 2011.1
-
Micro/nano sculpturing of hardened steel by controlling vibration amplitude in elliptical vibration cutting Reviewed
Norikazu Suzuki, Hideo Yokoi, Eiji Shamoto
Precision Engineering Vol. 35 ( Issue 1 ) page： 44-50 2011.1
-
Development of Mirror Surface Finishing Technology for Sculptured Steel Molds Reviewed
Norikazu Suzuki, Hideo Yokoi, Eiji Shamoto, Seiji Hamada, Takashi Ueyama
the 4th international CIRP high performance cutting conference Vol. 2 page： 69-74 2010.10
-
Elliptical vibration cutting of plasma nitriding steel Reviewed
Yilong WANG, Norikazu SUZUKI, Eiji SHAMOTO, Qingliang ZHAO
the 4th international CIRP high performance cutting conference Vol. 2 page： 75-80 2010.10
-
Chatter Stability in Turning with In Process Identified Process Damping Reviewed
Yusuke Kurata, S. Doruk Merdol, Yusuf Altintas, Norikazu Suzuki, Eiji Shamoto
the 4th international CIRP high performance cutting conference Vol. 1 page： 71-74 2010.10
-
Ultrasonic elliptical vibration cutting of plasma nitriding steel Reviewed
Yilong Wang, Norikazu Suzuki, Eiji Shamoto, Qingliang Zhao
Proceeding of 4th CIRP international conference on high performance cutting Vol. 2 page： 75-80 2010.10
-
Effect of Cross Transfer Function on Chatter Stability in Plunge Cutting Reviewed Open Access
Norikazu Suzuki, Kohei Nishimura, Eiji Shamoto, Kiyoshi Yoshino
Journal of Advanced Mechanical Design, Systems, and Manufacturing Vol. 4 ( 5 ) page： 883-891 2010.8
-
Proposal of Schedule-Based Path Planning for Automated Vehicles Guided by Uni-directed Rails Reviewed
Rei Hino, Takao Hosoi, Norikazu Suzuki and Eiji Shamoto
International Symposium on Flexible Automation page： CD-ROM 2010.7
-
Suppression of forced chatter vibration in simultaneous double-sided milling of flexible plates Reviewed
Tatsuya Mori, Tomoki Hiramatsu and Eiji Shamoto
2nd CIRP PMI Conference page： CD-ROM 2010.6
-
Prediction of Chatter-Free Cutting Conditions for High Performance Boring Operation Reviewed
Yusuke KURATA, Norikazu SUZUKI, Rei HINO, Eiji SHAMOTO
2nd CIRP PMI Conference page： CD-ROM 2010.6
-
Development of High Performance Nano Sculpturing System for Steel Materials by using Elliptical Vibration Cutting Reviewed
Norikazu Suzuki, Hideo Yokoi, Rei Hino and Eiji Shamoto
2nd CIRP PMI Conference page： CD-ROM 2010.6
-
Suppression of regenerative chatter vibration in simultaneous double-sided milling of flexible plates by speed difference Reviewed
Eiji Shamoto, Tatsuya Mori, Kohei Nishimura, Tomoki Hiramatsu, Yusuke Kurata
CIRP Annals - Manufacturing Technology Vol. 59 ( 1 ) page： 387-390 2010.5