Papers - SHAMOTO Eiji
-
Suppression of Regenerative Chatter Vibration in Peripheral Finishing of Hardened Steel with Variable Helix End Mill Reviewed
Atsushi Ito, Norikazu Suzuki, Eiji Shamoto
7th International Conference and Exhibition on Design and Production of MACHINES and DIES/MOLDS page： 123-128 2013.6
-
Fundamental Study on Tool Damage in High-speed Ceramic Milling of Inconel 718 Reviewed
R. Enmei, N. Suzuki, E. Shamoto, Y. Hasegawa, R. Shibata, Y. Hatano, K. Itakura
the 8th International Conference on MicroManufacturing (ICOMM2013) page： 377-383 2013.3
-
"Two-Section Inclined End-Milling" to Realize High-Efficiency Trimming of CFRP Reviewed Open Access
Vol. 80 ( 2 ) page： 183-190 2013.2
-
Elasto Hydrodynamic Lubrication Analysis of CMP Process with Consideration of Micro Asperity Contact of Polishing Pad Reviewed Open Access
Y. Hashimoto, N. Suzuki, M. Asaba, R. Hino and E. Shamoto
Vol. 79 ( 1 ) page： 73-80 2013.1
-
Influence of material composition on ductile machining of tungsten carbide in elliptical vibration cutting Reviewed
Jianguo Zhang, Norikazu Suzuki, Takashi Kato, Rei Hino, Eiji Shamoto
The 14th International Conference on Precision Engineering page： 113-118 2012.11
-
Cross Coupling Controller Design for Motion Synchronization of Dual Motor Driven Servo Systems Reviewed
Burak Sencer, Kosuke Ishizaki, Eiji Shamoto
The 5th International Conference on Positioning Technology 2012 page： 45-48 2012.11
-
Proposal and Analysis of an Innovative Liquid Bearing Utilizing Traveling Waves Reviewed
Ying-Jie Li, Burak Sencer, Eiji Shamoto
The 5th International Conference on Positioning Technology 2012 page： 221-224 2012.11
-
A Novel Design Method of Irregular Pitch Cutters to Attain Simultaneous Suppression of Multi-Mode Regenerations Reviewed Open Access
Norikazu Suzuki, Takuya Kojima, Rei Hino, Eiji Shamoto
PMI2012 page： 97-101 2012.10
-
Identification of Nonlinear Viscoelasticity of Polishing Pad Using an On-Machine Compression Tester Reviewed
Norikazu Suzuki, Masakazu Asaba, Yohei Hashimoto, Eeiji Shamoto
International Conference on Planarization/CMP Technology page： 217-221 2012.10
-
Identification of Transfer Function by Inverse Analysis of Self-Excited Chatter Vibration in Milling Operations Reviewed
Norikazu Suzuki, Yusuke Kurata, Takashi Kato, Rie Hino, Eiji Shamoto
Precision Engineering Vol. 36 page： 568-575 2012.10
-
Clarification and Quantitative Prediction of Friction Damping on Contact Surface of Mechanical Structure (Case of Torsional Vibration) Reviewed Open Access
Miki SHINAGAWA and Eiji SHAMOTO
Vol. 78 ( 790 ) page： 2048-2063 2012.6
-
Development of novel anisotropic boring tool for chatter suppression Reviewed Open Access
Norikazu Suzuki, Kohei Nishimura, Ryo Watanabe, Takashi Kato, Eiji Shamoto
Fifth CIRP Conference on High Performance Cutting 2012 Vol. 1 page： 56-59 2012.6
-
Three-dimensional cutting analysis by assuming multiple thin shear planes with minimum energy principle Reviewed
Eiji Shamoto, M. Kato, Norikazu Suzuki, Rei Hino
The 15th international conference on Machine Design and Production UMTIK, page： CD-ROM 2012.6
-
A novel tool path/posture optimization concept to avoid chatter vibration in machining - Proposed concept and its verification in turning Reviewed
Eiji Shamoto, Shunsuke Fujimaki, Burak Sencer, Norikazu, Suzuki, Takashi Kato, Rei Hino
Vol. 61 ( 1 ) page： 331-334 2012.5
-
Modeling and analysis of chatter stability in double-sided milling of flexible plates utilizing speed difference method Reviewed
Eiji Shamoto, Tatsuya Mori, Burak Sencer, Takashi Kato, Norikazu Suzuki, Rei Hino
1st International Conference on Virtual Machining Process Technology-VMPT 2012 page： USB Memory 2012.5
-
Development of Mass-Producible Rapid Mixer Based on Baker's Transformation Reviewed Open Access
Vol. 78 ( 788 ) page： 762-768 2012.4
-
Prediction of chatter stability of machine tool with consideration of friction damping in guide (Development of basic model and investigation on effects of friction and stiffness) Reviewed Open Access
Miki SHINAGAWA and Eiji SHAMOTO
Vol. 78 ( 787 ) page： 1013-1025 2012.3
-
Confocal Microscopic Evaluation of Mixing Performance for Three-Dimensional Microfluidic Mixer Open Access
Takao YASUI, Yusuke OMOTO, Keiko OSATO, Noritada KAJI, Norikazu SUZUKI, Toyohiro NAITO, Yukihiro OKAMOTO, Manabu TOKESHI, Eiji SHAMOTO, Yoshinobu BABA
Analytical Sciences Vol. 28 ( 1 ) page： 57-59 2012.1
-
A Sliding Mode Controller Design for Position Synchronization of Dual Spindle Servo Systems Reviewed Open Access
Burak Sencer, Tatsuya Mori, Eiji Shamoto
Fifth CIRP Conference on High Performance Cutting 2012 Vol. 1 page： 250–254 2012
-
Consideration of Nonlinear Elasticity of Polishing Pad in CMP analysis Reviewed
Norikazu Suzuki, Yohei Hashimoto, Masakazu Asaba, Eiji Shamoto
International Conference on Planarization/CMP Technology (ICPT 2011 in Seoul) page： 402-405 2011.12