Papers - SHAMOTO Eiji
-
Mirror Surface Machining of High-Alloy Steels by Elliptical Vibration Cutting with Single-Crystalline Diamond Tools - Influence of Alloy Elements on Diamond Tool Damage Reviewed
Hiroshi SAITO, Hongjin JUNG, Eiji SHAMOTO, Tsung-Cho WU, Jui-Ting CHIEN
Precision Engineering Vol. 49 page： 200 - 210 2017.7
-
DESIGN OF ANISOTROPIC BORING TOOLS WITH L/D=10 FOR CHATTER FREE CUTTING
Takahashi Wataru, Suzuki Norikazu, Shamoto Eiji
PROCEEDINGS OF THE ASME 12TH INTERNATIONAL MANUFACTURING SCIENCE AND ENGINEERING CONFERENCE - 2017, VOL 3 2017
-
Generalized Design Method of Highly-Varied-Helix End Mills for Suppression of Regenerative Chatter in Peripheral Millin Reviewed
Takehiro Hayasaka, Atsushi Ito, Eiji Shamoto
Precision Engineering 2016.11
-
Elliptical vibration cutting of hardened die steel with coated carbide tools Reviewed
Hiroshi Saito, Hongjin Jung, Eiji Shamoto
Precision Engineering Vol. 45 page： 44–54 2016.7
-
Development of a high-performance chip-guiding turning process-tool design and chip flow control Reviewed
Tomoya Aoki, Burak Sencer, Eiji Shamoto, Norikazu Suzuki, Tomio Koide
The International Journal of Advanced Manufacturing Technology Vol. 85 page： 791-805 2016.7
-
Mechanism and suppression of frictional chatter in high-efficiency elliptical vibration cutting
Hongjin Jung, Takehiro Hayasaka, Eiji Shamoto
CIRP Annals -Manufacturing Technology Vol. 65 ( 1 ) page： 369-372 2016.5
-
Mirror surface finishing of hardened die steel by high-power ultrasonic elliptical vibration cutting Reviewed
Hongjin JUNG, Eiji SHAMOTO, Takashi UEYAMA, Seiji HAMADA, Liangji XU
Journal of Machine Engineering Vol. 16 ( 1 ) page： 5-14 2016.3
-
A novel deep groove machining method utilizing variable-pitch end mill with feed-directional thin support Reviewed
Eiji Shamoto,Akira Saito
Precision Engineering Vol. 43 page： 277-284 2016.1
-
溝付き工具を用いた切りくず案内切削の機構 Reviewed
青木友弥，Sencer Burak，鈴木教和，小出富夫，社本英二
精密工学会誌 Vol. 82 ( 1 ) page： 75-81 2016.1
-
Development of a high-performance chip-guiding turning process-tool design and chip flow control Reviewed
Tomoya Aoki, Burak Sencer, Eiji Shamoto, Norikazu Suzuki, Tomio Koide
The International Journal of Advanced Manufacturing Technology Vol. 85 page： 791-805 2015.10
-
角度差の大きい不等リードエンドミルによる高硬度材の半径方向低切込み・軸方向高切込み加工法の提案－提案手法の実験的検証と再生効果相殺線図による理解 Reviewed
伊藤 敦, 社本英二
精密工学会誌 Vol. 81 ( 9 ) page： 867-874 2015.9
-
High Speed Cornering Strategy with Confined Contour Error and Vibration Suppression for CNC Machine Tools Reviewed
Burak Sencer, Kosuke Ishizaki, Eiji Shamoto
CIRP Annals - Manufacturing Technology Vol. 64 ( 1 ) page： 369-372, 2015.5
-
An Innovative Machining Strategy for Efficient Peripheral Finishing of Hard Materials with Highly-Varied-Helix End Mill Reviewed
Atsushi Ito, Eiji Shamoto
International Journal of Automation Technology Vol. 9 ( 2 ) page： 153-160 2015.3
-
Ultra-precision nano-structure fabrication by amplitude control sculpturing method in elliptical vibration cutting Reviewed
Jianguo Zhang, Norikazu Suzuki, Yielong Wang, Eiji Shamoto
Precision Engineering Vol. 39 page： 86-99 2015.1
-
溝付き工具を用いた切りくず案内切削の機構 Reviewed
青木友弥，Sencer Burak，鈴木教和，小出富夫，社本英二
精密工学会誌 Vol. 82 ( 1 ) page： 75-81 2015.1
-
Effective Torque Ripple Compensation in Feed Drive Systems Based on the Adaptive Sliding Mode Controller Reviewed
Burak Sencer, Eiji Shamoto
IEEE/ASME Transactions on Mechatronics Vol. 19 ( 6 ) page： 1764-1772 2014.12
-
Tool failure Mechanism in High-Speed Milling of Inconel 718 by Use of Ceramic Tools Reviewed
Norikazu Suzuki, Risa Enmei, Yohei Hashimoto, Eiji Shamoto, Yuki Hatano
International Journal of Automation Technology Vol. 8 ( 6 ) page： 837-846 2014.11
-
Fundamental investigation of ultra-precision ductile machining of tungsten carbide by applying elliptical vibration cutting with singlecrystal diamond Reviewed
Jianguo Zhang, Norikazu Suzuki, Yilong Wang, Eiji Shamoto
Journal of Materials Processing Technology Vol. 214 ( 11 ) page： 2644–2659 2014.11
-
A curvature optimal sharp corner smoothing algorithm for high-speed feed motion generation of NC systems along linear tool paths Reviewed
Burak Sencer, Kosuke Ishizaki, Eiji Shamoto
International Journal of Advanced Manufacturing Technology 2014.10
-
Elliptical Vibration Cutting of Hardened Steel with Large Nose Radius Single Crystal Diamond Tool Reviewed
Yilong Wang, Eiji Shamoto
International Journal of Automation Technology Vol. 8 ( 6 ) page： 820-826 2014.9