Papers - SHAMOTO Eiji
-
Analysis and Improvement of Motion Accuracy of Hydrostatic Feed Table Reviewed
Eiji Shamoto, Chun-Hong Park, Toshimichi Moriwaki
Annals of the CIRP Vol. 50 ( 1 ) page： 285-290 2001.8
-
Resent Development in Ultraprecision Machining and Machine Tool Technology Invited Reviewed
Toshimichi Moriwaki and Eiji Shamoto
International seminar on precision engineering and micro technology (Euspen) page： 161-170 2000.7
-
Prediction of Shear Angle in Oblique Cutting with Maximum Shear Stress and Minimum Energy Principles Reviewed
Eiji Shamoto and Yusuf Altintas
Trans. ASME Journal of Manufacturing Science and Engineering Vol. 1 ( 121 ) page： 399-407 1999.8
-
Ultraprecision Ductile Cutting of Glass by Applying Ultrasonic Elliptical Vibration Cutting Reviewed
Eiji Shamoto, Chun-Xiang Ma and Toshimichi Moriwaki
Proc. of 1st International Conference and general meeting of the European Society for Precision Engineering and Nanotechnology (EUSPEN) page： 408-411 1999.5
-
Regenerative Chatter Suppression in Turning by Applying Ultrasonic Elliptical Vibration Reviewed
C. Ma, E. Shamoto, B. Sattayawuthiphong, T. Moriwaki
Memoirs of Graduate School of Science & Technology, Kobe Univ Vol. 17 ( A ) page： 47-62 1999.3
-
Elliptical Vibration Cutting(2nd report, Study on Effects of Vibration Conditions) Reviewed Open Access
Vol. 65 ( 3 ) page： 411-417 1999.3
-
A Study on Evaluation of Physical Activity in Relation to Body Fat Reviewed
Chikako Matsuda, Eiji Shamoto, Toshimichi Moriwaki, Norimasa Misaki
Memoirs of Graduate School of Science & Technology, Kobe Univ Vol. 17 ( A ) page： 63-69 1999.3
-
Analysis of Thermal Deformation of an Ultraprecision Air Spindle System Reviewed
Toshimichi Moriwaki, Eiji Shamoto
Annals of the CIRP Vol. 47 ( 01 ) page： 315-319 1998.8
-
Development of an Intelligent Turning Machine Equipped with Open-Architecture CNC Controller to Compensate Thermal Deformation of Machine Tool Reviewed
Toshimichi MORIWAKI, Rei HINO, Noritaka FUJIMURA,Eiji SHAMOTO, Hidetaka SHIBATA and Masayuki NASHIKI
Proceedings of the International Seminar on Improving Machine Tool Performance page： 317-332 1998.7
-
Intelligent Tool Condition Monitoring for Milling Reviewed
Toshimichi Moriwaki and Eiji Shamoto
CIRP Journal of Manufacturing Systems Vol. 27 ( 3 ) page： 327-332 1998
-
ヤリの弾性を考慮に入れたやり投げの力学的解析 Reviewed Open Access
前田 正登，野村 治夫，社本 英二，森脇 俊道
体育学研究 Vol. 42 ( 4 ) page： 270-282 1997.12
-
Prediction of Thermal Deformation of Machine Tool with Strain Sensor Reviewed
Toshimichi Moriwaki, Eiji Shamoto, Masahiro Kawano
1997 ASME International Mechanical Engineering Congress & Exposition MED-Vol.6-1, Manufacturing Science and Technology Vol. 1 page： 137-142 1997.11
-
周囲気温変化による超精密工作機械の熱変形－伝達関数による熱変形特性の検討とたたみこみ積分による推定 Reviewed Open Access
森脇 俊道，社本 英二，徳永 剛志
日本機械学会論文集Ｃ編 Vol. 63 ( 615 ) page： 4025-4030 1997.11
-
Prediction of Shear Angle in Oblique Cutting with Maximum Shear Stress and Minimum Energy Principles Reviewed
Eiji Shamoto and Yusuf Altintas
1997 ASME International Mechanical Engineering Congress & Exposition, MED-Vol.6-1, Manufacturing Science and Technology Vol. 1 page： 121-128 1997.11
-
Rigid XYθ table for Ultraprecision Machine Tool Driven by Means of Walking Drive Reviewed
Eiji Shamoto and Toshimichi Moriwaki
Annals of the CIRP Vol. 46 ( 1 ) page： 301-304 1997.8
-
Coupling Mechanism for High Precision Feed Table with Ballscrew Reviewed
Chun-hong Park, Toshimichi Moriwaki and Eiji Shamoto
Proc. of JSME Centennial Grand Congress, Int. Conf. on Manuf. Milestones toward the 21st Century MM21 page： 139-143 1997.7
-
Ultraprecision Diamond Cutting of Die Steel by Applying Ultrasonic Elliptical Vibration Cutting Reviewed
Eiji Shamoto, Toshimichi Moriwaki and Makoto Matsuo
International Conference and Exhibition on Design and Production of Dies and Molds page： 105-110 1997.6
-
Intelligent Tool Condition Monitoring for Milling Reviewed
Toshimichi Moriwaki and Eiji Shamoto
29th CIRP Int. Seminar on Manufacturing Systems page： 287-292 1997.5
-
Ultraprecision Continuous Path Control for Walking Drive Reviewed
Eiji Shamoto and Toshimichi Moriwaki
Proc. of 9th Int. Precision Engineering Seminar / 4th Int. Conf. on Ultraprecision in Manufacturing Engineering Vol. 12 page： 484-487 1997.5
-
Ultraprecision Continuous Path Control for Walking Drive Reviewed
Eiji Shamoto and Toshimichi Moriwaki
Progress in Precision Engineering and Nanotechnology, Proc. of 9th Int. Precision Engineering Seminar / 4th Int. Conf. on Ultraprecision in Manufacturing Engineering page： 484-487 1997.5