Papers - SHAMOTO Eiji

Theoretical modelling and simulation of chip clogging in drilling and experimental verification Reviewed Open Access

Eiji Shamoto, Takehiro Hayasaka, Kyungki Lee

The International Journal of Advanced Manufacturing Technology   Vol. Special issue on Recent advancement in Manufacturing Technology   2025.5

　More details

Authorship：Lead author,　Corresponding author   Language：English   Publishing type：Research paper (scientific journal)  

DOI： 10.1007/s00170-025-15602-y

Open Access

Interaction between forced and chatter vibrations through flank-workpiece interference Reviewed Open Access

Takehiro Hayasaka, Hayato Murai, Kyungki Lee, Eiji Shamoto

CIRP Annals – Manufacturing Technology   Vol. 74 ( 1 ) page： 575 - 578   2025.4

　More details

Authorship：Last author   Language：English   Publishing type：Research paper (scientific journal)  

DOI： https://doi.org/10.1016/j.cirp.2025.04.064

Open Access

Study on extraordinarily-high-speed cutting mechanics and its application to dry cutting of aluminum alloys with non-coated carbide tools Invited Reviewed International coauthorship Open Access

Jun Eto, Takehiro Hayasaka*, Eiji Shamoto, Liangji Xu

Journal of Manufacturing and Materials Processing   Vol. 8 ( 5 ) page： 198   2024.9

　More details

Authorship：Last author   Language：English   Publishing type：Research paper (scientific journal)  

DOI： https://doi.org/10.3390/jmmp8050198

Open Access

“L-stock method” – High-efficiency high-chatter-stability high-precision thin-wall milling strategy with aggressive use of plunge milling Reviewed

Takehiro Hayasaka, Keigo Miyagawa, Kyungki Lee, Akira Saito, Eiji Shamoto

CIRP Annals – Manufacturing Technology   Vol. 73 ( 1 ) page： 289 - 292   2024.5

　More details

Authorship：Last author   Language：English   Publishing type：Research paper (scientific journal)  

DOI： https://doi.org/10.1016/j.cirp.2024.04.085

Novel real-time monitoring method of depths of cut and runout for milling process utilizing FFT analysis of cutting torque Invited Reviewed

Kyungki Lee, Takehiro Hayasaka, Eiji Shamoto

Precision Engineering   Vol. 81   page： 36 - 49   2023.5

　More details

Authorship：Corresponding author   Language：English   Publishing type：Research paper (scientific journal)  

DOI： https://doi.org/10.1016/j.precisioneng.2023.01.010

A new hypothesis of steady-state flank wear progression of cutting tools with similar geometry and its verification Invited Reviewed

Ryosuke Kataoka, Eiji Shamoto

Precision Engineering   Vol. 81   page： 183 - 191   2023.5

　More details

Authorship：Corresponding author   Language：English   Publishing type：Research paper (scientific journal)  

DOI： https://doi.org/10.1016/j.precisioneng.2023.01.007

Proposal of novel chatter-free milling strategy utilizing extraordinarily numerous flute endmill and high-speed high-power machine tool Invited Reviewed Open Access

Jun Eto, Takehiro Hayasaka, Eiji Shamoto

Precision Engineering   Vol. 80   page： 95 - 103   2023.3

　More details

Authorship：Last author   Language：English   Publishing type：Research paper (scientific journal)  

DOI： https://doi.org/10.1016/j.precisioneng.2022.11.007

Open Access

Novel rotational center self-identification of machine tool by utilizing multiple tool-workpiece contacts with redundant-axis movement Reviewed Open Access

Kyungki Lee, Takehiro Hayasaka, Soohyun Nam, Eiji Shamoto

Precision Engineering   ( 79 ) page： 185 - 189   2023.1

　More details

Authorship：Last author   Language：English   Publishing type：Research paper (scientific journal)  

DOI： https://doi.org/10.1016/j.precisioneng.2022.09.012

Open Access

Parameter identification for linear model of the milling process using spindle speed variation Reviewed Open Access

Kazuki Takahei, Satoshi Miwa, Eiji Shamoto, Norikazu Suzuki

Precision Engineering   Vol. 79   page： 16 - 33   2023.1

　More details

Language：English   Publishing type：Research paper (scientific journal)  

DOI： https://doi.org/10.1016/j.precisioneng.2022.08.011

Identification of the model parameter for milling process simulation with sensor-integrated disturbance observer Reviewed

Kazuki Takahei, Norikazu Suzuki, Eiji Shamoto

Precision Engineering   Vol. 78   page： 146 - 162   2022.11

　More details

Authorship：Last author   Language：English   Publishing type：Research paper (scientific journal)  

DOI： https://doi.org/10.1016/j.precisioneng.2022.07.013

A new real-time trajectory generation method modifying trajectory based on trajectory error and angular speed for high accuracy and short machining time Reviewed Open Access

Kousuke Ishizaki, Eiji Shamoto

Precision Engineering   Vol. 76   page： 173 - 189   2022.7

　More details

Authorship：Last author,　Corresponding author   Language：English   Publishing type：Research paper (scientific journal)  

DOI： https://doi.org/10.1016/j.precisioneng.2022.02.012

Open Access

“Multimode Vibration Cutting” – A New Vibration Cutting for Highly-efficient and Highly-flexible Surface Texturing Reviewed Open Access

Hongjin Jung, Takehiro Hayasaka, Eiji Shamoto, Hiroaki Ishii, Takashi Ueyama, Seiji Hamada

Precision Engineering   Vol. 72   page： 111 - 121   2021.11

　More details

Authorship：Last author   Language：English   Publishing type：Research paper (scientific journal)  

DOI： https://doi.org/10.1016/j.precisioneng.2021.04.003

Open Access

“Peel cutting” – a new cutting method for difficult-to-cut workpieces with hard oxide surfaces Reviewed Open Access

Tomohiro Komiyama, Eiji Shamoto, Ikuya Onozato, Koichi Akazawa

Precision Engineering   Vol. 72   page： 613 - 619   2021.11

　More details

Authorship：Corresponding author   Language：English   Publishing type：Research paper (scientific journal)  

DOI： https://doi.org/10.1016/j.precisioneng.2021.07.003

Open Access

Unique Regenerative Chatter in Wiper-Turning Operation with Burnishing Process, Part 2: Experimental Verification of Predicted Generation Mechanism, Critical Stability, and Characteristics Reviewed

Mitsunori Hirose, Takehiro Hayasaka, Eiji Shamoto

Precision Engineering   Vol. 71   page： 313 - 323   2021.9

　More details

Authorship：Last author   Language：English   Publishing type：Research paper (scientific journal)  

DOI： https://doi.org/10.1016/j.precisioneng.2020.05.012

Unique regenerative chatter in wiper-turning operation with burnishing process Part 1: Prediction and analytical investigation of generation mechanism, critical stability, and characteristics Reviewed

Mitsunori Hirose, Takehiro Hayasaka, Eiji Shamoto

Precision Engineering   Vol. 71   page： 304 - 312   2021.9

　More details

Authorship：Last author   Language：English   Publishing type：Research paper (scientific journal)  

DOI： https://doi.org/10.1016/j.precisioneng.2020.05.011

Dynamic contour error compensation in micro/nano machining of hardened steel by applying elliptical vibration sculpturing method Reviewed Open Access

Zhang Jianguo, Suzuki Norikazu, Shamoto Eiji, Xu Jianfeng

PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY   Vol. 71   page： 250 - 262   2021.9

　More details

Authorship：Last author   Language：English   Publishing type：Research paper (scientific journal)  

DOI： 10.1016/j.precisioneng.2021.03.017

Open Access

Web of Science

Analytical Prediction of Chatter Stability for Modulated Turning Reviewed Open Access

Soohyun Nam, Bora Eren, Takehiro Hayasaka, Burak Sencer, Eiji Shamoto

International Journal of Machine Tools and Manufacture   Vol. 165   page： 103739   2021.6

　More details

Authorship：Last author   Language：English   Publishing type：Research paper (scientific journal)  

DOI： https://doi.org/10.1016/j.ijmachtools.2021.103739

Open Access

Proposal of ‘ImpEC (impact excitation cutting)’ for realization of high-flexibility and high-efficiency micro/nano surface texturing Reviewed Open Access

Takehiro Hayasaka, Pinzhang Sun, Hongjin Jung, Yudai Mizutani, Eiji Shamoto

CIRP Annals – Manufacturing Technology   Vol. 70 ( 1 ) page： 41 - 44   2021.5

　More details

Authorship：Last author   Language：English   Publishing type：Research paper (scientific journal)  

DOI： https://doi.org/10.1016/j.cirp.2021.04.023

Open Access

Development of a novel boring tool with anisotropic dynamic stiffness to avoid chatter vibration in cutting Part 1: Design of anisotropic structure to attain infinite dynamic stiffness Reviewed Open Access

Takahashi Wataru, Suzuki Norikazu, Shamoto Eiji

PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY   Vol. 68   page： 57 - 71   2021.3

　More details

Language：English  

DOI： 10.1016/j.precisioneng.2020.11.007

Open Access

Web of Science

Proposal of novel spindle speed variation profile with constant acceleration rate for improvement of chatter stability Reviewed Open Access

Nam Soohyun, Hayasaka Takehiro, Jung Hongjin, Shamoto Eiji

PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY   Vol. 68   page： 218 - 234   2021.3

　More details

Authorship：Last author   Language：English   Publishing type：Research paper (scientific journal)  

DOI： 10.1016/j.precisioneng.2020.12.008

Open Access

Web of Science

Influence of flank texture patterns on the suppression of chatter vibration and flank adhesion in turning operations Reviewed

PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY   Vol. 68   page： 262 - 272   2021.3

　More details

Language：English  

DOI： 10.1016/j.precisioneng.2020.12.007

Web of Science

Development of a novel boring tool with anisotropic dynamic stiffness to avoid chatter vibration in cutting Part2:Analytical and experimental verification of the proposed method Reviewed Open Access

Wataru Takahashi, Norikazu Suzuki, Eiji Shamoto

PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY   Vol. 68   page： 20 - 34   2021.3

　More details

Language：English  

DOI： 10.1016/j.precisioneng.2020.11.008

Open Access

Formulation of intervibrator motion and development of a controller for a pulse-drive transmission Reviewed

Tsuchiya Eiji, Shamoto Eiji

MECHANISM AND MACHINE THEORY   Vol. 150   2020.8

　More details

Authorship：Last author   Language：English   Publishing type：Research paper (scientific journal)  

DOI： 10.1016/j.mechmachtheory.2020.103880

Web of Science

Novel geometrical design of turning inserts for high-efficiency smooth-surface high-stability cutting Reviewed

Masatoshi Itoh, Takehiro Hayasaka, Eiji Shamoto

Precision Engineering   Vol. 64   page： 138 - 146   2020.7

　More details

Authorship：Last author   Language：English   Publishing type：Research paper (scientific journal)  

DOI： 10.1016/j.precisioneng.2020.03.018

Web of Science

Suppression of Forced Vibration due to Chip Segmentation in Ultrasonic Elliptical Vibration Cutting of Titanium Alloy Ti-6Al-4V Reviewed

Hongjin Jung, Takehiro Hayasaka, Eiji Shamoto, Liangji Xu

Precision Engineering   Vol. 64   page： 98 - 107   2020.7

　More details

Authorship：Last author   Language：English   Publishing type：Research paper (scientific journal)  

DOI： 10.1016/j.precisioneng.2020.03.017

Web of Science

High-efficiency smooth-surface high-stability machining of thin plates with novel face-milling cutter geometry Reviewed

Masatoshi Itoh, Takehiro Hayasaka, Eiji Shamoto

Precision Engineering   Vol. 64   page： 165 - 176   2020.7

　More details

Authorship：Last author   Language：English   Publishing type：Research paper (scientific journal)  

DOI： 10.1016/j.precisioneng.2020.03.024

Web of Science

次元解析による切削温度の研究 （第２報：被削材・工具の熱物性の影響評価） Reviewed Open Access

上田 隆司，宇土 誠一，平井 佑樹，社本 英二

日本機械学会論文集   Vol. 86 ( 887 ) page： 20-00100 - 20-00100   2020.7

　More details

Authorship：Last author   Language：Japanese  

DOI： 10.1299/transjsme.20-00100

Open Access

Suppression of tool damage in ultraprecision diamond machining of stainless steel by applying electron-beam-excited plasma nitriding Reviewed

Hiroshi SAITO, Hongjin JUNG, Eiji SHAMOTO, Yasuhiro HARA, and Tamio HARA

Precision Engineering   Vol. 63   page： 126 - 136   2020.5

　More details

Authorship：Last author   Language：English   Publishing type：Research paper (scientific journal)  

DOI： 10.1016/j.precisioneng.2020.01.005

Web of Science

Proposal of novel chatter stability indices of spindle speed variation based on its chatter growth characteristics Reviewed Open Access

Soohyun Nam, Takehiro Hayasaka, Hongjin Jung, and Eiji Shamoto

Precision Engineering   Vol. 62   page： 121 - 133   2020.3

　More details

Language：English   Publishing type：Research paper (scientific journal)  

DOI： 10.1016/j.precisioneng.2019.11.018

Open Access

Web of Science

Material removal efficiency improvement by orientation control of CMP pad surface asperities Reviewed Open Access

Norikazu Suzuki, Hirotaka Misono, Eiji Shamoto, Yohei Hashimoto, Hozumi Yasuda, Yoshihiro Mochizuki

Precision Engineering   Vol. 62   page： 83 - 88   2020.3

　More details

Language：English   Publishing type：Research paper (scientific journal)  

DOI： 10.1016/j.precisioneng.2019.11.008

Open Access

Web of Science

Proposal of "Curved-Profile Wiper Turning" for efficient, stable, and smooth finishing Reviewed

Fujimaki Shunsuke, Shibayama Teruki, Hayasaka Takehiro, Shamoto Eiji

PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY   Vol. 61   page： 152 - 159   2020.1

　More details

Language：English   Publishing type：Research paper (scientific journal)  

DOI： 10.1016/j.precisioneng.2019.09.014

Web of Science

A lightweight interpolation algorithm for short-segmented machining tool paths to realize vibration avoidance, high accuracy, and short machining time Reviewed

Hayasaka Takehiro, Minoura Kazuaki, Ishizaki Kousuke, Shamoto Eiji, Sencer Burak

PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY   Vol. 59   page： 1 - 17   2019.9

　More details

Language：English   Publishing type：Research paper (scientific journal)  

DOI： 10.1016/j.precisioneng.2019.05.006

Web of Science

Frictional properties of surface textures fabricated on hardened steel by elliptical vibration diamond cutting Reviewed Open Access

Zhang Jianguo, Zhang Junjie, Rosenkranz Andreas, Suzuki Norikazu, Shamoto Eiji

PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY   Vol. 59   page： 66 - 72   2019.9

　More details

Language：English   Publishing type：Research paper (scientific journal)  

DOI： 10.1016/j.precisioneng.2019.06.001

Web of Science

Consolidated chatter stability prediction model considering material removing and ploughing processes Reviewed

Hayasaka Takehiro, Jung Hongjin, Azuma Kensuke, Shamoto Eiji

PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY   Vol. 59   page： 120 - 133   2019.9

　More details

Language：English   Publishing type：Research paper (scientific journal)  

DOI： 10.1016/j.precisioneng.2019.06.006

Web of Science

次元解析による切削温度の研究（Al2O3工具を用いた旋削における切削条件の影響） Reviewed

上田 隆司, 平井 佑樹, 宇土 誠一，社本 英二

日本機械学会論文集   Vol. 85 ( 869 )   2019.1

　More details

Language：Japanese   Publishing type：Research paper (scientific journal)  

DOI： 10.1299/transjsme.18-00284

Influence of vibration in cutting on tool flank wear: Fundamental study by conducting a cutting experiment with forced vibration in the depth-of-cut direction Reviewed

Kataoka Ryosuke, Shamoto Eiji

PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY   Vol. 55   page： 322-329   2019.1

　More details

Language：English   Publishing type：Research paper (scientific journal)  

DOI： 10.1016/j.precisioneng.2018.09.021

Web of Science

Regenerative chatter by teeth allocated in the cutting direction with position-dependent modal displacement ratios Reviewed Open Access

Hayasaka Takehiro, Xu Yang, Jung Hongjin, Shamoto Eiji, Xu Liangji

CIRP ANNALS-MANUFACTURING TECHNOLOGY   Vol. 68 ( 1 ) page： 409 - 412   2019

　More details

Language：English   Publishing type：Research paper (scientific journal)  

DOI： 10.1016/j.cirp.2019.04.003

Open Access

Web of Science

VARIABLE HELIX CUTTER DESIGN TO SUPPRESS REGENERATIVE EFFECT Reviewed

Suzuki Norikazu, Ishiguro Rikiya, Morita Tomoki, Shamoto Eiji

PROCEEDINGS OF THE ASME 14TH INTERNATIONAL MANUFACTURING SCIENCE AND ENGINEERING CONFERENCE, 2019, VOL 2     page： .   2019

　More details

Language：English  

Web of Science

Suppression Mechanism of Diamond Tool Wear in Ultrasonic Vibration Cutting Reviewed

Fukumori Satoru, Itoigawa Fumihiro, Maegawa Satoru, Nakamura Takashi, Shamoto Eiji

PROCEEDINGS OF THE 22ND INTERNATIONAL ESAFORM CONFERENCE ON MATERIAL FORMING (ESAFORM 2019)   Vol. 2113   2019

　More details

Language：English   Publishing type：Research paper (international conference proceedings)  

DOI： 10.1063/1.5112628

Web of Science

Study on Process Monitoring of Elliptical Vibration Cutting by Utilizing Internal Data in Ultrasonic Elliptical Vibration Device Reviewed

Hongjin Jung, Takehiro Hayasaka and Eiji Shamoto

International Journal of Precision Engineering and Manufacturing-Green Technology   Vol. 5 ( 5 ) page： 571 - 581   2018.10

　More details

Language：English   Publishing type：Research paper (scientific journal)  

DOI： 10.1007/s40684-018-0059-9

Web of Science

Mirror Surface Machining of Steel by Elliptical Vibration Cutting with Diamond-Coated Tools Sharpened by Pulse Laser Grinding Reviewed Open Access

Hiroshi Saito, Hongjin Jung, Eiji Shamoto, Shinya Suganuma, Fumihiro Itoigawa

International Journal of Automation Technology   Vol. 12 ( 4 ) page： 573-581   2018.7

　More details

Language：English   Publishing type：Research paper (scientific journal)  

DOI： 10.20965/ijat.2018.p0573

Open Access

Development of a new method for joint damping identification in a bolted lap joint Reviewed

Mehdi Sanati, Yoshiki Terashima, Eiji Shamoto, Simon S. Park

Journal of Mechanical Science and Technology   Vol. 32 ( 5 ) page： 1975 - 1983   2018.5

　More details

Language：English   Publishing type：Research paper (scientific journal)  

DOI： 10.1007/s12206-018-0405-4

Web of Science

Proposal of `accelerative cutting' for suppression of regenerative chatter Reviewed

Takehiro Hayasaka, Soohyun Nam, Hongjin Jung, Eiji Shamoto, Katsuhisa Saito

CIRP Annals_ Manufacturing Technology   Vol. 67 ( 1 ) page： 401–404   2018.5

　More details

Language：English   Publishing type：Research paper (scientific journal)  

DOI： https://doi.org/10.1016/j.cirp.2018.04.030

Accurate interpolation of machining tool-paths based on FIR filtering Reviewed Open Access

Shingo Tajima, Burak Sencer, Eiji Shamoto

Precision Engineering   Vol. 52   page： 332 - 344   2018.4

　More details

Language：English   Publishing type：Research paper (scientific journal)  

DOI： 10.1016/j.precisioneng.2018.01.016

Open Access

Web of Science

Proposal of 'accelerative cutting' for suppression of regenerative chatter

Hayasaka Takehiro, Nam Soohyun, Jun Hongjin, Shamoto Eiji, Saito Katsuhisa

CIRP ANNALS-MANUFACTURING TECHNOLOGY   Vol. 67 ( 1 ) page： 401 - 404   2018

　More details

DOI： 10.1016/j.cirp.2018.04.030

Web of Science

Pulse drive: A new power-transmission principle for a compact, high-efficiency, infinitely variable transmission Reviewed Open Access

Eiji Tsuchiya, Eiji Shamoto

Mechanism and Machine Theory   Vol. 118   page： 265 - 282   2017.12

　More details

Language：English   Publishing type：Research paper (scientific journal)  

DOI： 10.1016/j.mechmachtheory.2017.08.011

Open Access

Web of Science

セラミック工具を用いた難削材の高速旋削加工における切削温度とその影響に関する実験的研究 Reviewed Open Access

上田 隆司, 平井 佑樹, 社本 英二

日本機械学会論文集C編   Vol. 83 ( 856 ) page： 1-10   2017.11

　More details

Language：Japanese   Publishing type：Research paper (scientific journal)  

DOI： 10.1299/transjsme.17-00344

Open Access

Simulation-based Concurrent Identification of Milling Process and Mechanical Dynamics with Sensor-integrated Multi-inertial System Disturbance Observer Reviewed

K. Takahei, T. Fujita, R. Ikeda, N. Suzuki, S. Ohno, E. Shamoto

The 9th International Conference on Leading Edge Manufacturing in 21st Century (LEM21)     page： USB-Memory   2017.11

　More details

Language：English  

Influence of Clearance Angle on Micro/nano Structure Fabrication in Elliptical Vibration Cutting of Hardened Steel Reviewed

Jianguo Zhang; Norikazu Suzuki; Yilong Wang; Eiji Shamoto

International Journal of Nanomanufacturing (IJNM)   Vol. 13 ( 4 ) page： 351 - 361   2017.10

　More details

Language：English   Publishing type：Research paper (scientific journal)  

DOI： 10.1504/IJNM.2017.10008414

Proposal of `Peel Cutting' for Metals with Hard Oxide Layer Reviewed

Eiji Shamoto, Ikuya Onozato, Koichi Akazawa

EUROMAT2017     page： USB-Memory   2017.9

　More details

Authorship：Lead author   Language：English   Publishing type：Research paper (international conference proceedings)  

Mirror Surface Machining of High-Alloy Steels by Elliptical Vibration Cutting with Single-Crystalline Diamond Tools - Influence of Alloy Elements on Diamond Tool Damage Reviewed

Hiroshi SAITO, Hongjin JUNG, Eiji SHAMOTO, Tsung-Cho WU, Jui-Ting CHIEN

Precision Engineering   Vol. 49   page： 200 - 210   2017.7

　More details

Language：English   Publishing type：Research paper (scientific journal)  

DOI： 10.1016/j.precisioneng.2017.02.008

Web of Science

DESIGN OF ANISOTROPIC BORING TOOLS WITH L/D = 10 FOR CHATTER FREE CUTTING Reviewed

Wataru Takahashi, Norikazu Suzuki, Eiji Shamoto

The ASME 2017 International manufacturing Science and Engineering Conference(MSEC2017)   Vol. 1 ( 1 ) page： MSEC2017-2928   2017.6

　More details

Language：English   Publishing type：Research paper (international conference proceedings)  

DOI： 10.1115/MSEC2017-2928

DESIGN OF ANISOTROPIC BORING TOOLS WITH L/D=10 FOR CHATTER FREE CUTTING Reviewed

Takahashi Wataru, Suzuki Norikazu, Shamoto Eiji

PROCEEDINGS OF THE ASME 12TH INTERNATIONAL MANUFACTURING SCIENCE AND ENGINEERING CONFERENCE - 2017, VOL 3     2017

　More details

Language：English   Publishing type：Research paper (international conference proceedings)  

Web of Science

Generalized Design Method of Highly-Varied-Helix End Mills for Suppression of Regenerative Chatter in Peripheral Millin Reviewed Open Access

Takehiro Hayasaka, Atsushi Ito, Eiji Shamoto

Precision Engineering     2016.11

　More details

Language：English   Publishing type：Research paper (scientific journal)  

DOI： http://dx.doi.org/10.1016/j.precisioneng.2016.11.004

Open Access

Study on suppression mechanism of diamond tool wear in ultrasonic vibration cutting of steel Reviewed

Yudai MIZUTANI, Fumihiro ITOIGAWA, Eiji SHAMOTO, Takashi NAKAMURA

The 12th CHINA-JAPAN International Conference on Ultra-Precision Machining Process     page： CD-ROM   2016.11

　More details

Language：English   Publishing type：Research paper (international conference proceedings)  

Elliptical vibration cutting of hardened die steel with coated carbide tools Reviewed

Hiroshi Saito, Hongjin Jung, Eiji Shamoto

Precision Engineering   Vol. 45   page： 44–54   2016.7

　More details

Language：English   Publishing type：Research paper (scientific journal)  

DOI： https://doi.org/10.1016/j.precisioneng.2016.01.004

Development of a high-performance chip-guiding turning process-tool design and chip flow control Reviewed

Tomoya Aoki, Burak Sencer, Eiji Shamoto, Norikazu Suzuki, Tomio Koide

The International Journal of Advanced Manufacturing Technology   Vol. 85   page： 791-805   2016.7

　More details

Language：English   Publishing type：Research paper (scientific journal)  

DOI： 10.1007/s00170-015-7990-5

Primitive study on model-based process identification by utilizing force estimation techniques Reviewed

Norikazu Suzuki, Ryosuke Ikeda, Eiji Shamoto

ASME 2016 International manufacturing Science and Engineering Conference(MSEC2016)     page： MSEC2016-8872   2016.6

　More details

Language：English   Publishing type：Research paper (international conference proceedings)  

Mechanism and suppression of frictional chatter in high-efficiency elliptical vibration cutting Open Access

Hongjin Jung, Takehiro Hayasaka, Eiji Shamoto

CIRP Annals -Manufacturing Technology   Vol. 65 ( 1 ) page： 369-372   2016.5

　More details

Language：English   Publishing type：Research paper (scientific journal)  

DOI： 10.1016/j.cirp.2016.04.103

Open Access

Studies on Cutting Temperature of Difficult-to-machine Materials in High Speed Cutting Reviewed

Takashi Ueda, Yuki Hirai, Sho Nakamura, Eiji Shamoto

5th International Conference on Virtual Machining Process Technology (VMPT 2016)     page： 1-6   2016.3

　More details

Language：English   Publishing type：Research paper (international conference proceedings)  

Mirror surface finishing of hardened die steel by high-power ultrasonic elliptical vibration cutting Reviewed

Hongjin JUNG, Eiji SHAMOTO, Takashi UEYAMA, Seiji HAMADA, Liangji XU

Journal of Machine Engineering   Vol. 16 ( 1 ) page： 5-14   2016.3

　More details

Language：English   Publishing type：Research paper (scientific journal)  

A novel deep groove machining method utilizing variable-pitch end mill with feed-directional thin support Reviewed

Eiji Shamoto,Akira Saito

Precision Engineering   Vol. 43   page： 277-284   2016.1

　More details

Authorship：Lead author   Language：English   Publishing type：Research paper (scientific journal)  

DOI： 10.1016/j.precisioneng.2015.08.006

溝付き工具を用いた切りくず案内切削の機構 Reviewed Open Access

青木友弥，Sencer Burak，鈴木教和，小出富夫，社本英二

精密工学会誌   Vol. 82 ( 1 ) page： 75-81   2016.1

　More details

Language：Japanese   Publishing type：Research paper (scientific journal)  

DOI： 10.2493/jjspe.82.75

Open Access

Development of a high-performance chip-guiding turning process-tool design and chip flow control Reviewed

Tomoya Aoki, Burak Sencer, Eiji Shamoto, Norikazu Suzuki, Tomio Koide

The International Journal of Advanced Manufacturing Technology   Vol. 85   page： 791-805   2015.10

　More details

Language：English   Publishing type：Research paper (scientific journal)  

DOI： 10.1007/s00170-015-7990-5

Estimation of transfer function of flexible mechanical structures by utilizing cutting force model and observer technique Reviewed

Norikazu SUZUKI, Ryosuke IKEDA, Kenji SANO and Eiji SHAMOTO

The 8th nternational Conference on Leading Edge Manufacturing in 21st Century(LEM21)     page： CD-ROM   2015.10

　More details

Language：English   Publishing type：Research paper (international conference proceedings)  

A NEW CONTACT MODEL OF PAD SURFACE ASPERITIES UTILIZING MEASURED GEOMETRICAL FEATURES Reviewed

Yohei Hashimoto, Shingo Oshika, Norikazu Suzuki, Eiji Shamoto

International Conference on Planarization/CMP Technology (ICPT2015 in Arizona)     page： 46-49   2015.9

　More details

Language：English   Publishing type：Research paper (international conference proceedings)  

角度差の大きい不等リードエンドミルによる高硬度材の半径方向低切込み・軸方向高切込み加工法の提案－提案手法の実験的検証と再生効果相殺線図による理解 Reviewed Open Access

伊藤　敦, 社本英二

精密工学会誌   Vol. 81 ( 9 ) page： 867-874   2015.9

　More details

Language：Japanese   Publishing type：Research paper (scientific journal)  

DOI： 10.2493/jjspe.81.867

Open Access

Development of an advanced turning system assisted by chippulling. Reviewed

Burak Sencer, Eiji Shamoto, Tomoya Aoki

10th ASME 2015 Manufacturing Science and Engineering Conference (MSEC2015)     page： CD-ROM   2015.6

　More details

Language：English   Publishing type：Research paper (international conference proceedings)  

A Novel Deep Groove Machining Method Utilizing Variable-Pitch End Mill with One-Directional Thin Support, 4th International Conference on Virtual Machining Process Technology Reviewed

Eiji Shamoto, Akira Saito

CIRP Sponsored Conference (VMPT 2015)     page： USB Memory   2015.6

　More details

Language：English   Publishing type：Research paper (international conference proceedings)  

Frequency Optimal Spline Interpolation for High Speed Machine Tools Reviewed

Burak Sencer, Eiji Shamoto

4th International Conference on Virtual Machining Process Technology     page： USB Memory   2015.6

　More details

Language：English   Publishing type：Research paper (international conference proceedings)  

Elliptical Vibration Cutting of Hardened Die Steel with Coated Carbide Tools Reviewed

Hiroshi Saito, Hongjin Jung, Eiji Shamoto

4th International Conference on Virtual Machining Process Technology     page： USB Memory   2015.6

　More details

Language：English   Publishing type：Research paper (international conference proceedings)  

DOI： 10.1016/j.precisioneng.2016.01.004

High Speed Cornering Strategy with Confined Contour Error and Vibration Suppression for CNC Machine Tools Reviewed

Burak Sencer, Kosuke Ishizaki, Eiji Shamoto

CIRP Annals - Manufacturing Technology   Vol. 64 ( 1 ) page： 369-372,   2015.5

　More details

Language：English   Publishing type：Research paper (scientific journal)  

DOI： 10.1016/j.cirp.

An Innovative Machining Strategy for Efficient Peripheral Finishing of Hard Materials with Highly-Varied-Helix End Mill Reviewed

Atsushi Ito, Eiji Shamoto

International Journal of Automation Technology   Vol. 9 ( 2 ) page： 153-160   2015.3

　More details

Language：English   Publishing type：Research paper (scientific journal)  

Ultra-precision nano-structure fabrication by amplitude control sculpturing method in elliptical vibration cutting Reviewed

Jianguo Zhang, Norikazu Suzuki, Yielong Wang, Eiji Shamoto

Precision Engineering   Vol. 39   page： 86-99   2015.1

　More details

Language：English   Publishing type：Research paper (scientific journal)  

DOI： 10.1016/j.precisioneng.2014.07.009

溝付き工具を用いた切りくず案内切削の機構 Reviewed Open Access

青木友弥，Sencer Burak，鈴木教和，小出富夫，社本英二

精密工学会誌   Vol. 82 ( 1 ) page： 75-81   2015.1

　More details

Language：Japanese   Publishing type：Research paper (scientific journal)  

DOI： 10.2493/jjspe.82.75

Open Access

Effective Torque Ripple Compensation in Feed Drive Systems Based on the Adaptive Sliding Mode Controller Reviewed

Burak Sencer, Eiji Shamoto

IEEE/ASME Transactions on Mechatronics   Vol. 19 ( 6 ) page： 1764-1772   2014.12

　More details

Language：English   Publishing type：Research paper (scientific journal)  

Analytical investigation on polishing pressure distribution by utilizing three-dimensional process simulation Reviewed

Yohei Hashimoto, Norikazu Suzuki, Akimitsu Kato, Masakazu Asaba, Eiji Shamoto, Hozumi Yasuda, Satoru Yamaki;

The 11th international Conference for Planarization/CMP Technology (ICPT 2014)     page： 32-34   2014.11

　More details

Language：English   Publishing type：Research paper (international conference proceedings)  

Tool failure Mechanism in High-Speed Milling of Inconel 718 by Use of Ceramic Tools Reviewed

Norikazu Suzuki, Risa Enmei, Yohei Hashimoto, Eiji Shamoto, Yuki Hatano

International Journal of Automation Technology   Vol. 8 ( 6 ) page： 837-846   2014.11

　More details

Language：English   Publishing type：Research paper (scientific journal)  

Fundamental investigation of ultra-precision ductile machining of tungsten carbide by applying elliptical vibration cutting with singlecrystal diamond Reviewed

Jianguo Zhang, Norikazu Suzuki, Yilong Wang, Eiji Shamoto

Journal of Materials Processing Technology   Vol. 214 ( 11 ) page： 2644–2659   2014.11

　More details

Language：English   Publishing type：Research paper (scientific journal)  

DOI： 10.1016/j.jmatprotec.2014.05.024

A curvature optimal sharp corner smoothing algorithm for high-speed feed motion generation of NC systems along linear tool paths Reviewed

Burak Sencer, Kosuke Ishizaki, Eiji Shamoto

International Journal of Advanced Manufacturing Technology     2014.10

　More details

Language：English   Publishing type：Research paper (scientific journal)  

DOI： 10.1007/s00170-014-6386-2

Elliptical Vibration Cutting of Hardened Steel with Large Nose Radius Single Crystal Diamond Tool Reviewed

Yilong Wang, Eiji Shamoto

International Journal of Automation Technology   Vol. 8 ( 6 ) page： 820-826   2014.9

　More details

Language：English   Publishing type：Research paper (scientific journal)  

Effects of Guide Groove Shape on Chip Controllability for Chip-Guiding Turning Reviewed

Tomoya Aoki, Burak Sencer, Eiji Shamoto, Tomio Koide

The International Conference on Machining, Materials and Mechanical Technologies (IC3MT)     page： CD-ROM   2014.8

　More details

Language：English   Publishing type：Research paper (international conference proceedings)  

High Efficiency Elliptical Vibration Cutting of Hardened Steel with Large Nose Radius Single Crystal Diamond Tool Reviewed

Yilong WANG, Eiji SHAMOTO

The 16th International Conference on Machine Design and Production (UMTIK2014)     page： CD-ROM   2014.6

　More details

Language：English   Publishing type：Research paper (international conference proceedings)  

Development of a chip pulling system for efficient turning Reviewed Open Access

Burak Sencer, Tomoya Aoki, Eiji Shamoto, Takumi Hasegawa, Tomio Koide

6th CIRP International Conference on High Performance Cutting (HPC2014)     page： a flash drive   2014.6

　More details

Language：English   Publishing type：Research paper (international conference proceedings)  

DOI： 10.1016/j.procir.2014.03.092

Open Access

Force prediction in cutting operations with self-propelled rotary tools considering bearing friction Reviewed Open Access

Norikazu Suzuki, Toru Suzuki, Ran An, Kota Ukai, Eiji Shamoto, Yu Hasegawa, Nobukazu Horiike

6th CIRP International Conference on High Performance Cutting (HPC2014)     page： a flash drive   2014.6

　More details

Language：English   Publishing type：Research paper (international conference proceedings)  

DOI： 10.1016/j.procir.2014.03.033

Open Access

Regenerative Chatter Avoidance in Turning and Milling by Optimizing Directional Relations between Process and Vibration Mode, 3rd International Conference on Virtual Machining Process Technology Reviewed

Eiji Shamoto, Sencer Burak, Shunsuke Fujimaki

Proceedings of CIRP Sponcered Conference (VMPT 2014)     page： USB Memory   2014.5

　More details

Language：English   Publishing type：Research paper (international conference proceedings)  

Analytical prediction of contact stiffness and friction damping in bolted connection Reviewed

Eiji Shamoto, Yohei Hashimoto, Miki Shinagawa, Burak Sencer

CIRP Annals Manufacturing Technology   Vol. 63 ( 1 ) page： 353-356   2014.5

　More details

Language：English   Publishing type：Research paper (scientific journal)  

DOI： 10.1016/j.cirp.2014.03.134

Primary study on nonlinear viscoelasticity measurement of chemical mechanical polishing pads by applying on-machine compression test Reviewed

Norikazu Suzuki, Akimitsu Kato, Masakazu Asaba, Eiji Shamoto

Japanese Journal of Applied Physics   Vol. 53 ( 5S2 )   2014.4

　More details

Language：English   Publishing type：Research paper (scientific journal)  

DOI： 10.7567/JJAP.53.05GB01

Study on Hole Machining of Plastic with Sharp Knife Edge Tool - Comprehension of Knife-Cutting Process Reviewed Open Access

  Vol. 79 ( 12 ) page： 1251-1257   2013.12

　More details

Language：Japanese   Publishing type：Research paper (scientific journal)  

DOI： 10.2493/jjspe.79.1251

Open Access

Design and Application of a Sliding Mode Controller for Accurate Motion Synchronization of Dual Servo Systems Reviewed

Burak Sencer, Tatuya Mori , Eiji Shamoto

Control Engineering Practice   Vol. 21 ( 11 ) page： 1519-1530   2013.11

　More details

Language：English   Publishing type：Research paper (scientific journal)  

DOI： 10.1016/j.conengprac.2013.07.001

Identification of Nonlinear Viscoelasticity of CMP Pads Reviewed

Norikazu Suzuki, Akimitsu Kato, Masakazu Asaba, Eiji Shamoto

Proceedings of Advanced Metallization Conference 2013     page： CD-ROM   2013.10

　More details

Language：English   Publishing type：Research paper (international conference proceedings)  

Multiple Exchanges of Job Orders for No Buffer Job Shop Scheduling Problem (Identification of Jobs to be Changed on Gantt Chart) Reviewed Open Access

  Vol. 79 ( 806 ) page： 3951-3964   2013.10

　More details

Language：Japanese   Publishing type：Research paper (scientific journal)  

DOI： 10.1299/kikaic.79.3951

Open Access

Polishing pressure distribution analysis in CMP process with airbag type polishing head Reviewed

Norikazu Suzuki, Masakazu Asaba, Akimitsu Kato, Eiji Shamoto, Hozumi Yasuda, Satoru Yamaki

Proceedings of International Conference on Planarization/CMP Technology     page： 166-170   2013.10

　More details

Language：English   Publishing type：Research paper (international conference proceedings)  

Cross Coupling Controller for Accurate Motion Synchronization of Dual Servo Systems Reviewed

Kosuke Ishizaki, Burak Sencer, Eiji Shamoto

International Journal of Automation Technology   Vol. 7 ( 5 ) page： 514-521   2013.9

　More details

Language：English   Publishing type：Research paper (scientific journal)  

Analysis of three dimensional cutting process with thin shear plane model Reviewed

Eiji Shamoto, Masahiro Kato, Norikazu Suzuki, Rei Hino

Transactions of the ASME Journal of Manufacturing Science and Engineering   Vol. 135   page： 10.1115/1.4024531   2013.8

　More details

Authorship：Lead author   Language：English   Publishing type：Research paper (scientific journal)  

DOI： 10.1115/1.4024531

Suppression of Regenerative Chatter Vibration in Multiple Milling Utilizing Speed Difference Method - Analysis of Double-Sided Milling and Its Generalization to Multiple Milling Operations Reviewed

Eiji Shamoto, Tatsuya Mori, Burak Sencer, Norikazu Suzuki, Rei Hino

Precision Engineering   Vol. 37 ( 3 ) page： 580-589   2013.7

　More details

Authorship：Lead author   Language：English   Publishing type：Research paper (scientific journal)  

DOI： 10.1016/j.precisioneng.2013.01.003

Adaptive Torque Ripple Compensation Technique Based on the Variable Structure Control and its Applications to Gear Driven Motion Systems Reviewed

Burak Sencer, Eiji Shamoto

the 2013 American Control Conference     page： CD-ROM?   2013.6

　More details

Language：English   Publishing type：Research paper (international conference proceedings)  

A novel design method of variable helix cutters to attain robust regeneration suppression Reviewed Open Access

Takuya Kojima, Norikazu Suzuki, Rei Hino, Eiji Shamoto

14th CIRP Conference on Modeling of Machining Operations     page： 362-366   2013.6

　More details

Language：English   Publishing type：Research paper (international conference proceedings)  

DOI： 10.1016/j.procir.2013.06.117

Open Access

Investigation on machining performance of amplitude control sculpturing method in elliptical vibration cutting Reviewed

Jianguo Zhang, Norikazu Suzuki, Eiji Shamoto

14th CIRP Conference on Modeling of Machining Operations     page： 327-332   2013.6

　More details

Language：English   Publishing type：Research paper (international conference proceedings)  

Study on High-Efficiency Trimming of CFRP with End Mill Reviewed

T. Kaga, E. Shamoto, J. Tamura, M. Zaitsu

7th International Conference and Exhibition on Design and Production of MACHINES and DIES/MOLDS     page： 119-122   2013.6

　More details

Language：English   Publishing type：Research paper (international conference proceedings)  

Suppression of Regenerative Chatter Vibration in Peripheral Finishing of Hardened Steel with Variable Helix End Mill Reviewed

Atsushi Ito, Norikazu Suzuki, Eiji Shamoto

7th International Conference and Exhibition on Design and Production of MACHINES and DIES/MOLDS     page： 123-128   2013.6

　More details

Language：English   Publishing type：Research paper (international conference proceedings)  

Fundamental Study on Tool Damage in High-speed Ceramic Milling of Inconel 718 Reviewed

R. Enmei, N. Suzuki, E. Shamoto, Y. Hasegawa, R. Shibata, Y. Hatano, K. Itakura

the 8th International Conference on MicroManufacturing (ICOMM2013)     page： 377-383   2013.3

　More details

Language：English   Publishing type：Research paper (international conference proceedings)  

"Two-Section Inclined End-Milling" to Realize High-Efficiency Trimming of CFRP Reviewed Open Access

  Vol. 80 ( 2 ) page： 183-190   2013.2

　More details

Language：Japanese   Publishing type：Research paper (scientific journal)  

DOI： 10.2493/jjspe.80.183

Open Access

Elasto Hydrodynamic Lubrication Analysis of CMP Process with Consideration of Micro Asperity Contact of Polishing Pad Reviewed Open Access

Y. Hashimoto, N. Suzuki, M. Asaba, R. Hino and E. Shamoto

  Vol. 79 ( 1 ) page： 73-80   2013.1

　More details

Language：Japanese   Publishing type：Research paper (scientific journal)  

DOI： 10.2493/jjspe.79.73

Open Access

Influence of material composition on ductile machining of tungsten carbide in elliptical vibration cutting Reviewed

Jianguo Zhang, Norikazu Suzuki, Takashi Kato, Rei Hino, Eiji Shamoto

The 14th International Conference on Precision Engineering     page： 113-118   2012.11

　More details

Language：English   Publishing type：Research paper (international conference proceedings)  

DOI： 10.4028/www.scientific.net/KEM.523-524.113

Cross Coupling Controller Design for Motion Synchronization of Dual Motor Driven Servo Systems Reviewed

Burak Sencer, Kosuke Ishizaki, Eiji Shamoto

The 5th International Conference on Positioning Technology 2012     page： 45-48   2012.11

　More details

Language：English   Publishing type：Research paper (international conference proceedings)  

Proposal and Analysis of an Innovative Liquid Bearing Utilizing Traveling Waves Reviewed

Ying-Jie Li, Burak Sencer, Eiji Shamoto

The 5th International Conference on Positioning Technology 2012     page： 221-224   2012.11

　More details

Language：English   Publishing type：Research paper (international conference proceedings)  

A Novel Design Method of Irregular Pitch Cutters to Attain Simultaneous Suppression of Multi-Mode Regenerations Reviewed Open Access

Norikazu Suzuki, Takuya Kojima, Rei Hino, Eiji Shamoto

PMI2012     page： 97-101   2012.10

　More details

Language：English   Publishing type：Research paper (international conference proceedings)  

DOI： 10.1016/j.procir.2012.10.018

Open Access

Identification of Nonlinear Viscoelasticity of Polishing Pad Using an On-Machine Compression Tester Reviewed

Norikazu Suzuki, Masakazu Asaba, Yohei Hashimoto, Eeiji Shamoto

International Conference on Planarization/CMP Technology     page： 217-221   2012.10

　More details

Language：English   Publishing type：Research paper (international conference proceedings)  

Identification of Transfer Function by Inverse Analysis of Self-Excited Chatter Vibration in Milling Operations Reviewed

Norikazu Suzuki, Yusuke Kurata, Takashi Kato, Rie Hino, Eiji Shamoto

Precision Engineering   Vol. 36   page： 568-575   2012.10

　More details

Language：English   Publishing type：Research paper (scientific journal)  

DOI： 10.1016/j.precisioneng.2012.04.004

Clarification and Quantitative Prediction of Friction Damping on Contact Surface of Mechanical Structure (Case of Torsional Vibration) Reviewed Open Access

Miki SHINAGAWA and Eiji SHAMOTO

  Vol. 78 ( 790 ) page： 2048-2063   2012.6

　More details

Language：Japanese   Publishing type：Research paper (scientific journal)  

DOI： 10.1299/kikaic.78.2048

Open Access

Development of novel anisotropic boring tool for chatter suppression Reviewed Open Access

Norikazu Suzuki, Kohei Nishimura, Ryo Watanabe, Takashi Kato, Eiji Shamoto

Fifth CIRP Conference on High Performance Cutting 2012   Vol. 1   page： 56-59   2012.6

　More details

Language：English   Publishing type：Research paper (international conference proceedings)  

DOI： 10.1016/j.procir.2012.04.008

Open Access

Three-dimensional cutting analysis by assuming multiple thin shear planes with minimum energy principle Reviewed

Eiji Shamoto, M. Kato, Norikazu Suzuki, Rei Hino

The 15th international conference on Machine Design and Production UMTIK,     page： CD-ROM   2012.6

　More details

Language：English   Publishing type：Research paper (international conference proceedings)  

A novel tool path/posture optimization concept to avoid chatter vibration in machining - Proposed concept and its verification in turning Reviewed

Eiji Shamoto, Shunsuke Fujimaki, Burak Sencer, Norikazu, Suzuki, Takashi Kato, Rei Hino

  Vol. 61 ( 1 ) page： 331-334   2012.5

　More details

Authorship：Lead author   Language：English   Publishing type：Research paper (scientific journal)  

DOI： 10.1016/j.cirp.2012.03.133

Modeling and analysis of chatter stability in double-sided milling of flexible plates utilizing speed difference method Reviewed

Eiji Shamoto, Tatsuya Mori, Burak Sencer, Takashi Kato, Norikazu Suzuki, Rei Hino

1st International Conference on Virtual Machining Process Technology-VMPT 2012     page： USB Memory   2012.5

　More details

Authorship：Lead author   Language：English   Publishing type：Research paper (international conference proceedings)  

Development of Mass-Producible Rapid Mixer Based on Baker's Transformation Reviewed Open Access

  Vol. 78 ( 788 ) page： 762-768   2012.4

　More details

Language：Japanese   Publishing type：Research paper (scientific journal)  

DOI： 10.1299/kikaib.78.762

Open Access

Prediction of chatter stability of machine tool with consideration of friction damping in guide (Development of basic model and investigation on effects of friction and stiffness) Reviewed Open Access

Miki SHINAGAWA and Eiji SHAMOTO

  Vol. 78 ( 787 ) page： 1013-1025   2012.3

　More details

Language：Japanese   Publishing type：Research paper (scientific journal)  

DOI： 10.1299/kikaic.78.1013

Open Access

Confocal Microscopic Evaluation of Mixing Performance for Three-Dimensional Microfluidic Mixer Open Access

Takao YASUI, Yusuke OMOTO, Keiko OSATO, Noritada KAJI, Norikazu SUZUKI, Toyohiro NAITO, Yukihiro OKAMOTO, Manabu TOKESHI, Eiji SHAMOTO, Yoshinobu BABA

Analytical Sciences   Vol. 28 ( 1 ) page： 57-59   2012.1

　More details

Language：English   Publishing type：Research paper (scientific journal)  

DOI： 10.2116/analsci.28.57

A Sliding Mode Controller Design for Position Synchronization of Dual Spindle Servo Systems Reviewed Open Access

Burak Sencer, Tatsuya Mori, Eiji Shamoto

Fifth CIRP Conference on High Performance Cutting 2012   Vol. 1   page： 250–254   2012

　More details

Language：English   Publishing type：Research paper (international conference proceedings)  

DOI： 10.1016/j.procir.2012.04.045

Open Access

Consideration of Nonlinear Elasticity of Polishing Pad in CMP analysis Reviewed

Norikazu Suzuki, Yohei Hashimoto, Masakazu Asaba, Eiji Shamoto

International Conference on Planarization/CMP Technology (ICPT 2011 in Seoul)     page： 402-405   2011.12

　More details

Language：English   Publishing type：Research paper (international conference proceedings)  

Investigation of tool wear suppression in ultraprecision diamond machining of die steel

Yilong Wang, Norikazu Suzuki, Eiji Shamoto, Qingliang Zhao

Precision Engineering   Vol. 35   page： 677- 685   2011.10

　More details

Language：English   Publishing type：Research paper (scientific journal)  

DOI： 10.1016

Microfluidic baker's transformation device for three-dimensional rapid mixing Reviewed

Takao Yasui, Yusuke Omoto, Keiko Osato, Noritada Kaji, Norikazu Suzuki, Toyohiro Naito, Masaki Watanabe, Yukihiro Okamoto, Manabu Tokeshi, Eiji Shamoto, Yoshinobu Baba

Lab on a Chip   Vol. 11 ( 19 ) page： 3356 - 3360   2011.8

　More details

Language：English   Publishing type：Research paper (scientific journal)  

DOI： 10.1039/C1LC20342H

Prediction and Compensation of Motion Accuracy in a Linear Motion Bearing Table Reviewed

Gyungho Khim, Chun Hong Park, Eiji Shamoto, and Seung Woo Kim

Precision Engineering   Vol. 35   page： 393-399   2011.7

　More details

Language：English   Publishing type：Research paper (scientific journal)  

DOI： 10.1016/j.precisioneng.2010.12. 006

Studies on Continuous Chip Disposal and Chip-Pulling Cutting - Challenge to Chip Control by Changing Shape of Rake Face Reviewed Open Access

Eiji Shamoto, Koichiro Yasuda, Tomoya Aoki, Norikazu Suzuki, Tomio Koide

  Vol. 77 ( 5 ) page： 520-524   2011.5

　More details

Authorship：Lead author   Language：English   Publishing type：Research paper (scientific journal)  

DOI： 10.2493/jjspe.77.520

Open Access

Dynamic Finite Element Analysis of Contact Stress in CMP Process Reviewed Open Access

Yohei Hashimoto, Norikazu Suzuki, Rei Hino, Eiji Shamoto

  Vol. 77 ( 5 ) page： 513-519   2011.5

　More details

Language：English   Publishing type：Research paper (scientific journal)  

DOI： 10.2493/jjspe.77.513

Open Access

Control of chip flow with guide grooves for continuous chip disposal and chip-pulling turning Reviewed

Eiji Shamoto, Tomoya Aoki, Burak Sencer, Norikazu Suzuki, Rei Hino, Tomio Koide

CIRP Annals-Manufacturing Technology   Vol. 60   page： 125-128   2011.5

　More details

Authorship：Lead author   Language：English   Publishing type：Research paper (scientific journal)  

DOI： 10.1016/j.cirp.2011.03.081

Ultraprecision sculpturing of hardened steel by applying elliptical vibration cutting Reviewed

Norikazu Suzuki, Eiji Shamoto

    page： 52-57   2011.3

　More details

Language：English   Publishing type：Research paper (international conference proceedings)  

Simultaneous double-sided milling of flexible plates with high accuracy and high efficiency -Suppression of forced chatter vibration with synchronized single-tooth cutters Reviewed

Tatsuya Mori, Tomoki Hiramatsu, Eiji Shamoto

Precision Engineering   Vol. 35   page： 416-423   2011.2

　More details

Language：English   Publishing type：Research paper (scientific journal)  

DOI： 10.1016/j.precisioneng.2011.02.002

Chatter Stability Limits in End Milling with Anisotropic Flexible Tools- Construction of Analytical Model with Consideration of Tool Inclination around Cutting Feed Direction Reviewed Open Access

Yusuke Kurata, Norikazu Suzuki, Rei Hino, Eiji Shamoto

  Vol. 77 ( 1 ) page： 97-104   2011.1

　More details

Language：Japanese   Publishing type：Research paper (scientific journal)  

DOI： 10.2493/jjspe.77.97

Open Access

Micro/nano sculpturing of hardened steel by controlling vibration amplitude in elliptical vibration cutting Reviewed

Norikazu Suzuki, Hideo Yokoi, Eiji Shamoto

Precision Engineering   Vol. 35 ( Issue 1 ) page： 44-50   2011.1

　More details

Language：English   Publishing type：Research paper (scientific journal)  

DOI： 10.1016/j.precisioneng.2010.09.006

Development of Mirror Surface Finishing Technology for Sculptured Steel Molds Reviewed

Norikazu Suzuki, Hideo Yokoi, Eiji Shamoto, Seiji Hamada, Takashi Ueyama

the 4th international CIRP high performance cutting conference   Vol. 2   page： 69-74   2010.10

　More details

Language：English   Publishing type：Research paper (international conference proceedings)  

Elliptical vibration cutting of plasma nitriding steel Reviewed

Yilong WANG, Norikazu SUZUKI, Eiji SHAMOTO, Qingliang ZHAO

the 4th international CIRP high performance cutting conference   Vol. 2   page： 75-80   2010.10

　More details

Language：English   Publishing type：Research paper (international conference proceedings)  

Chatter Stability in Turning with In Process Identified Process Damping Reviewed

Yusuke Kurata, S. Doruk Merdol, Yusuf Altintas, Norikazu Suzuki, Eiji Shamoto

the 4th international CIRP high performance cutting conference   Vol. 1   page： 71-74   2010.10

　More details

Language：English   Publishing type：Research paper (international conference proceedings)  

Ultrasonic elliptical vibration cutting of plasma nitriding steel Reviewed

Yilong Wang, Norikazu Suzuki, Eiji Shamoto, Qingliang Zhao

Proceeding of 4th CIRP international conference on high performance cutting   Vol. 2   page： 75-80   2010.10

　More details

Language：English   Publishing type：Research paper (international conference proceedings)  

Effect of Cross Transfer Function on Chatter Stability in Plunge Cutting Reviewed Open Access

Norikazu Suzuki, Kohei Nishimura, Eiji Shamoto, Kiyoshi Yoshino

Journal of Advanced Mechanical Design, Systems, and Manufacturing   Vol. 4 ( 5 ) page： 883-891   2010.8

　More details

Language：English   Publishing type：Research paper (scientific journal)  

DOI： 10.1299/jamdsm.4.883

Open Access

Proposal of Schedule-Based Path Planning for Automated Vehicles Guided by Uni-directed Rails Reviewed

Rei Hino, Takao Hosoi, Norikazu Suzuki and Eiji Shamoto

International Symposium on Flexible Automation     page： CD-ROM   2010.7

　More details

Language：English   Publishing type：Research paper (international conference proceedings)  

Suppression of forced chatter vibration in simultaneous double-sided milling of flexible plates Reviewed

Tatsuya Mori, Tomoki Hiramatsu and Eiji Shamoto

2nd CIRP PMI Conference     page： CD-ROM   2010.6

　More details

Language：English   Publishing type：Research paper (international conference proceedings)  

Prediction of Chatter-Free Cutting Conditions for High Performance Boring Operation Reviewed

Yusuke KURATA, Norikazu SUZUKI, Rei HINO, Eiji SHAMOTO

2nd CIRP PMI Conference     page： CD-ROM   2010.6

　More details

Language：English   Publishing type：Research paper (international conference proceedings)  

Development of High Performance Nano Sculpturing System for Steel Materials by using Elliptical Vibration Cutting Reviewed

Norikazu Suzuki, Hideo Yokoi, Rei Hino and Eiji Shamoto

2nd CIRP PMI Conference     page： CD-ROM   2010.6

　More details

Language：English   Publishing type：Research paper (international conference proceedings)  

Suppression of regenerative chatter vibration in simultaneous double-sided milling of flexible plates by speed difference Reviewed

Eiji Shamoto, Tatsuya Mori, Kohei Nishimura, Tomoki Hiramatsu, Yusuke Kurata

CIRP Annals - Manufacturing Technology   Vol. 59 ( 1 ) page： 387-390   2010.5

　More details

Authorship：Lead author   Language：English   Publishing type：Research paper (scientific journal)  

DOI： 10.1016/j.cirp.2010.03.028

FE Analysis of One-Directional and Elliptical Vibration Cutting Processes Reviewed

Saeid Amini, Eiji Shamoto, Norikazu Suzuki, Mohammad Javad Nategh

International Journal of Automation Technology   Vol. 4 ( 3 ) page： 252-258   2010.5

　More details

Language：English   Publishing type：Research paper (scientific journal)  

Effect of cross transfer function on chatter stability in plunge cutting Reviewed Open Access

Norikazu Suzuki, Kohei Nishimura, Eiji Shamoto, Kiyoshi Yoshino

the 5th International Conference on Leading Edge Manufacturing in 21st Century     page： 501-505   2009.12

　More details

Language：English   Publishing type：Research paper (international conference proceedings)  

DOI： 10.1299/jamdsm.4.883

Open Access

Analytical Study of Effects of Material Properties and Polishing Conditions on Tribological Phenomena during CMP Reviewed

Yohei HASHIMOTO, Norikazu Suzuki, Rei HINO and Eiji SHAMOTO

International Conference on Planarization/CMP Technology     page： 489-494   2009.11

　More details

Language：English   Publishing type：Research paper (international conference proceedings)  

Chatter Suppression in Milling with Anisotropic Tools Reviewed

Yusuke KURATA, Norikazu SUZUKI, Rei HINO, Eiji SHAMOTO

the 2009 International Symposium on Micromechatronics and Human Science     page： 547-552   2009.11

　More details

Language：English   Publishing type：Research paper (international conference proceedings)  

FE ANALYSIS AND EXPERIMENTS OF ONE DIRECTIONAL AND ELLIPTICAL ULTRASONIC VIBRATION-ASSISTED CUTTING OF CUPPER Reviewed

S. Amini, E. Shamoto, N. Suzuki, M. J. Nategh, H. Soleimanimehr

the International Conference on Advances in Materials and Processing Technologies 2009     page： 26-29   2009.10

　More details

Language：English   Publishing type：Research paper (international conference proceedings)  

Study on Regenerative Chatter Vibration in Ball End Milling of Flexible Workpieces - Construction of Analytical Model with Consideration of Tool Inclination around Cutting Feed Direction Reviewed Open Access

Koichi Akazawa, Eiji Shamoto

  Vol. 75 ( 8 ) page： 984-989   2009.8

　More details

Language：Japanese   Publishing type：Research paper (scientific journal)  

DOI： 10.2493/jjspe.75.984

Open Access

Comprehensive Study on Milling Conditions to Avoid Forced / Self-excited Chatter Vibrations Reviewed Open Access

Norikazu Suzuki, Tsutomu Ikada, Rei Hino, Eiji Shamoto

  Vol. 75 ( 7 ) page： 908-914   2009.7

　More details

Language：Japanese   Publishing type：Research paper (scientific journal)  

DOI： 10.2493/jjspe.75.908

Open Access

Ultra-precision micro texturing of hardened steel by controlling vibration amplitude in elliptical vibration cutting Reviewed

Norikazu Suzuki, Hideo Yokoi, Eiji Shamoto

9th International Conference of the European Society for Precision Engineering and Nanotechnology   Vol. 2   page： 406-409   2009.6

　More details

Language：English   Publishing type：Research paper (international conference proceedings)  

Analytical prediction of chatter stability in ball end milling with tool inclination Reviewed

Eiji Shamoto, Koichi Akazawa

CIRP Annals - Manufacturing Technology   Vol. 58 ( 1 ) page： 351-354   2009.5

　More details

Authorship：Lead author   Language：English   Publishing type：Research paper (scientific journal)  

DOI： 10.1016/j.cirp.2009.03.087

Development of Elliptical Vibration Cutting Technology and Its Application to Ultraprecision / Micro Machining of Hard / Brittle Materials Invited Reviewed

Advanced Materials Research   Vol. 69-70   page： 133-137   2009.5

　More details

Authorship：Lead author   Language：English   Publishing type：Research paper (scientific journal)  

DOI： 10.4028/www.scientific.net/AMR.69-70.133

Development of a System to Predict tool Wear Considering Cutting Conditions and Workpiece Components Reviewed

Koichi Akazawa, Katsuhiko Ozaki, Eiji Shamoto

  Vol. 75 ( 3 ) page： 396-401   2009.3

　More details

Language：Japanese   Publishing type：Research paper (scientific journal)  

Study on Re-entrant Flowshop Scheduling Problem(2nd report) Proposal of Heuristic Scheduling Method Reviewed

Rei Hino, Daisuke Uekawa, Masanori Morikawa, Norikazu Suzuki, Eiji Shamoto

  Vol. 74 ( 11 ) page： 1225-1230   2008.11

　More details

Language：Japanese   Publishing type：Research paper (scientific journal)  

Development of Elliptical Vibration Cutting Technology and Its Application to Ultraprecision / Micro Machining of Hard / Brittle Materials Invited Reviewed

Eiji Shamoto, Norikazu Suzuki

Proceedings of the 6th CHINA-JAPAN international Conference on Ultra-Precision Machining (CJICUPM2008)     page： 95-98   2008.11

　More details

Authorship：Lead author   Language：English   Publishing type：Research paper (international conference proceedings)  

Study on Regenerative Chatter Vibration in Ball End Milling of Flexible Workpieces Reviewed

    page： 1-6   2008.11

　More details

Language：English   Publishing type：Research paper (international conference proceedings)  

Study on Re-entrant Flowshop Scheduling Problem (1st report) : Optimization by Mathematical Programming Reviewed Open Access

Rei Hino, Daisuke Uekawa, Masanori Morikawa, Norikazu Suzuki, Eiji Shamoto

  Vol. 74 ( 10 ) page： 1119-1124   2008.10

　More details

Language：Japanese   Publishing type：Research paper (scientific journal)  

DOI： 10.2493/jjspe.74.1119

Open Access

Identification of transfer function of mechanical structure by inverse analysis of regenerative chatter vibration in end milling Reviewed

Norikazu SUZUKI, Yusuke KURATA, Rei HINO and Eiji SHAMOTO

Proceedings of HPC 2008     page： -   2008.7

　More details

Language：English   Publishing type：Research paper (international conference proceedings)  

Analysis of 3D Elliptical Vibration Cutting with Thin Shear Plane Model Reviewed

Eiji Shamoto, Norikazu Suzuki, Rei Hino

CIRP Annals - Manufacturing Technology   Vol. 57   page： 57-60   2008.5

　More details

Authorship：Lead author   Language：English   Publishing type：Research paper (scientific journal)  

DOI： 10.1016/j.cirp.2008.03.073

A New Method to Control Work-in-Process Inventory for High Manufacturing Productivity Reviewed

Rei Hino, Norikazu Suzuki and Eiji Shamoto

Manufacturing Systems and Technologies for the New Frontier: The 41st CIRP Conference on Manufacturing Systems     page： 221-224   2008.5

　More details

Language：English   Publishing type：Research paper (international conference proceedings)  

DOI： 10.1007/978-1-84800-267-8_45

Job Shop Scheduling Focusing on Role of Buffers (2nd Report: Feasibility Judgement by Utilizing Graph) Reviewed Open Access

Rei Hino, Yusuke Kodama, Norikazu Suzuki, Eiji Shamoto

  Vol. 73 ( 735 ) page： 3084-3091   2007.11

　More details

Language：Japanese   Publishing type：Research paper (scientific journal)  

DOI： 10.1299/kikaic.73.3084

Open Access

超精密・マイクロ機械加工技術とその展開 Open Access

社本 英二

日本機械学会創立110周年記念2007年度年次大会　講演資料集 ワークショップ「機械工学におけるマイクロナノ工学」   Vol. 8   page： 279-280   2007.9

　More details

Authorship：Lead author   Language：Japanese   Publishing type：Research paper (other academic)  

DOI： 10.1299/jsmemecjsm.2007.8.0_279

Open Access

Elliptical Vibration Cutting of Tungsten Alloy Molds for Optical Glass Parts Reviewed

Norikazu Suzuki, Makoto Haritani, Ji-bin Yang, Rei Hino, Eiji Shamoto

Annals of the CIRP   Vol. 56 ( 1 ) page： 127-130   2007.8

　More details

Language：English   Publishing type：Research paper (scientific journal)  

DOI： 10.1016/j.cirp.2007.05.032

Study on Production Scheduling with Consideration of Synchronized Operations by Multiple Resources Reviewed Open Access

Rei Hino, Yasuhiko Kobayashi, Norikazu Suzuki, Eiji Shamoto

  Vol. 73 ( 7 ) page： 834-839   2007.7

　More details

Language：Japanese   Publishing type：Research paper (scientific journal)  

DOI： 10.2493/jjspe.73.834

Open Access

Development of 3 DOF Ultrasonic Elliptical Vibration System for Elliptical Vibration Cutting Reviewed

Norikazu SUZUKI, Rei HINO, Eiji SHAMOTO

Proceedings of ASPE Spring Topical Meeting on Vibration Assisted Machining Technology     page： 15-20   2007.4

　More details

Language：English   Publishing type：Research paper (international conference proceedings)  

Simulation of Elliptical Vibration Cutting Process with Thin Shear Plane Model Reviewed

Eiji SHAMOTO, Norikazu SUZUKI and Rei HINO

Proceedings of ASPE Spring Topical Meeting on Vibration Assisted Machining Technology,     page： 64-69   2007.4

　More details

Authorship：Lead author   Language：English   Publishing type：Research paper (international conference proceedings)  

Ultraprecision Machining of Tungsten Alloy by Applying Ultrasonic Elliptical Vibration Cutting Reviewed

Norikazu Suzuki, Zhenmin Yan, Makoto Haritani, Ji-bin Yang, Seiji Hamada, Rei Hino, Eiji Shamoto

  Vol. 73 ( 3 ) page： 360-366   2007.3

　More details

Language：Japanese   Publishing type：Research paper (scientific journal)  

Sculptured Surface Machining of Die Steel by Applying Elliptical Vibration Cutting (2nd Report) - Development of 3 DOF Ultrasonic Elliptical Vibration Tool - Reviewed Open Access

Norikazu Suzuki, Rei Hino, Eiji Tsuchiya, Eiji Shamoto

  Vol. 73 ( 1 ) page： 117-123   2007.1

　More details

Language：Japanese   Publishing type：Research paper (scientific journal)  

DOI： 10.2493/jjspe.73.117

Open Access

Elliptical vibration cutting technology and its application to ultraprecision machining of hard / brittle materials Invited Reviewed

Eiji Shamoto and Norikazu Suzuki

Proceedings of Asian Symposium for Precision Engineering and Nanotechnology 2007 (ASPEN)   Vol. TA3 ( 1 ) page： 611-613   2007

　More details

Authorship：Lead author   Language：English   Publishing type：Research paper (international conference proceedings)  

International Symposium on Flexible Automation Reviewed

Yohei HASHIMOTO, Norikazu SUZUKI, Rei HINO and Eiji SHAMOTO

Proceedings of the 2007 International Symposium on Micromechatronics and Human Science     page： -   2007

　More details

Language：English   Publishing type：Research paper (international conference proceedings)  

Proposal of a New Fluid Bearing Utilizing Travering Wave Reviewed Open Access

Eiji Shamoto, Norikazu Suzuki, Hirotoshi Ueda, Rei Hino

  Vol. 72 ( 12 ) page： 1483-1488   2006.12

　More details

Authorship：Lead author   Language：Japanese   Publishing type：Research paper (scientific journal)  

DOI： 10.2493/jspe.72.1483

Open Access

Ultraprecision Micro-Machining of Single Crystal Germanium by Applying Elliptical Vibration Cutting Reviewed

Norikazu Suzuki, Zhenmin Yan, Yasuhiro Hirahara, Tadashi Masuda, Rei Hino, Eiji Shamoto

Proceedings of 2006 Int. Symp. on Micromechatronics and Human Science     page： 67-72   2006.11

　More details

Language：English   Publishing type：Research paper (international conference proceedings)  

Sculptured Surface Machining of Die Steel by Applying Elliptical Vibration Cutting (1st Report) - Proposal of a New Machining Method and Development of 4-Axis Controlled Precision Machine Tool - Reviewed

Eiji Shamoto, Norikazu Suzuki, Eiji Tsuchiya, Yasunori Hori, Hiroshi Inagaki and Kiyoshi Yoshino

  Vol. 72 ( 9 ) page： 1139-1145   2006.9

　More details

Authorship：Lead author   Language：Japanese   Publishing type：Research paper (scientific journal)  

A New Fluid Bearing Utilizing Traveling Wave Reviewed

Eiji Shamoto, Norikazu Suzuki, Akihide Hamaguchi

Annals of the CIRP   Vol. 55 ( 1 ) page： 411-414   2006.8

　More details

Authorship：Lead author   Language：English   Publishing type：Research paper (scientific journal)  

Ductile Machining of Brittle Materials by Applying Elliptical Vibration Cutting Reviewed

Norikazu SUZUKI, Shinsuke MASUDA, Makoto HARITANI, Eiji SHAMOTO

CIRP –2nd International Conference High Performance Cutting (HPC)     page： 1-10   2006.6

　More details

Language：English   Publishing type：Research paper (international conference proceedings)  

Ultraprecision Cutting of Sintered Tungsten Carbide by Applying Elliptical Vibration Cutting - Study on Ductile Cutting Mechanics Reviewed

Norikazu Suzuki, Rei Hino, Shinsuke Masuda and Eiji Shamoto

  Vol. 72 ( 04 ) page： 539-545   2006.4

　More details

Language：Japanese   Publishing type：Research paper (scientific journal)  

Development of Titanium Boride Grinding Wheel by Laser Sintering(Synthesis of titanium Boride and Grinding Experiment) Reviewed Open Access

Takeshi Nakamoto, Eiji Shamoto, Yoshitake Yamazaki and Youichi Shirakata

  Vol. 72 ( 716 ) page： 1384-1389   2006.4

　More details

Language：Japanese   Publishing type：Research paper (scientific journal)  

DOI： 10.1299/kikaic.72.1384

Open Access

Compensation for five DOF motion errors of hydrostatic feed table by utilizing actively controlled capillaries Reviewed

Chun Hong Park, Yoon Jin Oh, Eiji Shamoto, Deug Woo Lee

Precision Engineering   Vol. 30   page： 299-305   2006.2

　More details

Language：English   Publishing type：Research paper (scientific journal)  

DOI： 10.1016/j.precisioneng.2005.10.002

Ultra-precision Cutting of Brittle Materials with Ultrasonic Vibrated Diamond Tool Reviewed

Chunxiang Ma, E. Shamoto, Liming Xu, Nan Liu and T. Moriwaki

Materials Science Forum   Vol. 532-533   page： 169-172   2006

　More details

Language：English   Publishing type：Research paper (international conference proceedings)  

DOI： 10.4028/www.scientific.net/MSF.532-533.169

Development of Prototype of Production Management System Based on Scheduling Reviewed

Rei.Hino, Norikazu Suzuki, Eiji Shamoto

International Symposium on Flexible Automation     page： CD-ROM   2006

　More details

Language：English   Publishing type：Research paper (international conference proceedings)  

A New Method to Machine Sculptured Surfaces by Applying Ultrasonic Elliptical Vibration Cutting Reviewed

Eiji Shamoto, Norikazu Suzuki, Eiji Tsuchiya, Y. Hori, H. Inagaki, K. Yoshino

Proc. of the 2005 International Symposium on Micro-NanoMechatronics and Human Science(MHS2005)     page： 91-96   2005.11

　More details

Authorship：Lead author   Language：English   Publishing type：Research paper (international conference proceedings)  

Suppression of burrs in turning with ultrasonic elliptical vibration cutting Reviewed

Ma CX, Shamoto E, Moriwaki T, Yonghong Zhang and Lijiang Wang

International Journal of Machine Tools & Manufacture   Vol. 45 ( 11 ) page： 1295-1300   2005.9

　More details

Language：English   Publishing type：Research paper (scientific journal)  

DOI： 10.1016/j.ijmachtools.2005.01.011

Development of 3 DOF ultrasonic vibration tool for elliptical vibration cutting of sculptured surfaces Reviewed

Eiji Shamoto, Norikazu Suzuki, Eiji Tsuchiya, Yasunori Hori, Hiroshi Inagaki, Kiyoshi Yoshino

Annals of the CIRP   Vol. 54 ( 01 ) page： 321-324   2005.8

　More details

Authorship：Lead author   Language：English   Publishing type：Research paper (scientific journal)  

DOI： 10.1016/S0007-8506(07)60113-9

Drilling assisted by ultrasonic elliptical vibration Reviewed

Ma CX, Shamoto E, Moriwaki T

Key Engineering Materials   Vol. 291-292   page： 443-446   2005

　More details

Language：English   Publishing type：Research paper (scientific journal)  

DOI： 10.4028/www.scientific.net/KEM.291-292.443

Study on the Thrust Cutting Force in Ultrasonic Elliptical Vibration Cutting Reviewed

Chun-Xiang Ma, Eiji Shamoto and Toshimichi Moriwaki

Materials Science Forum   Vol. 471-472   page： 396-400   2004.11

　More details

Language：English   Publishing type：Research paper (international conference proceedings)  

DOI： 10.4028/www.scientific.net/MSF.471-472.396

Ultraprecision Micromachining of Brittle Materials by Applying Ultrasonic Elliptical Vibration Cutting Reviewed

Norikazu Suzuki, Shinsuke Masuda, Makoto Haritani and Eiji Shamoto

Proc. of the 2004 International Symposium on Micro-NanoMechatronics and Human Science     page： 133-138   2004.10

　More details

Language：English   Publishing type：Research paper (international conference proceedings)  

Ultraprecision Machining of Sintered Tungsten Carbide by Applying Ultrasonic Elliptical Vibration Cutting Invited Reviewed

N. Suzuki, S. Masuda and E. Shamoto

Proc. of 4th International Conference and 6th annual general meeting of the European Society for Precision Engineering and Nanotechnology (EUSPEN)     page： 187-188   2004.5

　More details

Language：English   Publishing type：Research paper (international conference proceedings)  

Study of machining accuracy in ultrasonic elliptical vibration cutting Reviewed

Chunxiang Ma, Eiji Shamoto, Toshimichi Moriwaki and Lijiang Wang

International Journal of Machine Tools and Manufacture   Vol. 44   page： 1305-1310   2004.4

　More details

Language：English   Publishing type：Research paper (scientific journal)  

DOI： 10.1016/j.ijmachtools.2004.04.014

Estimation of Thermal Deformation of Machine Tool by Utilizing Available Information in CNC Unit Reviewed Open Access

Eiji Shamoto, Rei Hino, Tatsuya Tomie, Yosuke Matsubara and Toshimichi Moriwaki

  Vol. 69 ( 686 ) page： 2775-2782   2003.10

　More details

Authorship：Lead author   Language：Japanese   Publishing type：Research paper (scientific journal)  

DOI： 10.1299/kikaic.69.2775

Open Access

Ultraprecision Micromachining of Hardened Steel by Applying Ultrasonic Elliptical Vibration Cutting Reviewed

Norikazu SUZUKI, Akihiro NAKAMURA, Eiji SHAMOTO, Kazuhiro HARADA, Makoto MATSUO, and Michio OSADA

2003 International Symposium on Micromechatronics and Human Science (MHS2003)     page： 221-226   2003.10

　More details

Language：English   Publishing type：Research paper (international conference proceedings)  

Proposal of Oblique Type of Elliptical Vibration Cutting and Its Basic Performance Reviewed Open Access

Eiji Shamoto, Young Chan Song, Kengo Sassa, Hideki Yoshida, Rei Hino, Toshimichi Moriwak

  Vol. 69 ( 07 ) page： 970-975   2003.7

　More details

Authorship：Lead author   Language：Japanese   Publishing type：Research paper (scientific journal)  

DOI： 10.2493/jjspe.69.970

Open Access

Intelligent Recognition of End Milling Conditions Based on Cutting Force Model - Development of monitoring method without any databases Reviewed Open Access

Eiji Shamoto, Rei Hino, Masayuki Umesaki, Toshimichi Moriwaki

  Vol. 69 ( 683 ) page： 1927-1932   2003.7

　More details

Authorship：Lead author   Language：Japanese   Publishing type：Research paper (scientific journal)  

DOI： 10.1299/kikaic.69.1927

Open Access

Tool Path Generation with Immediate Offset Method (1st Report) Proposal of fundamental procedure Reviewed Open Access

Rei Hino, Eiji Shamoto, Toshimichi Moriwaki

  Vol. 69 ( 6 ) page： 781-787   2003.6

　More details

Language：Japanese   Publishing type：Research paper (scientific journal)  

DOI： 10.2493/jjspe.69.781

Open Access

Ultraprecision Machining of Hard Materials by Applying Ultrasonic Elliptical Vibration Cutting Invited Reviewed

Eiji SHAMOTO and Norikazu SUZUKI

Int. Progress on Advanced Optics and Sensors     page： 195-201   2003.5

　More details

Authorship：Lead author   Language：English   Publishing type：Research paper (scientific journal)  

Development of Elliptical Vibration Cutting Machine by Utilizing Mechanical Vibrator Reviewed Open Access

Eiji Shamoto, YoungChan Song, Hideki Yoshida, Norikazu Suzuki, Toshimichi Moriwaki, Seido Kohda, Tetsuji Yamanishi

  Vol. 69 ( 4 ) page： 542-548   2003.4

　More details

Authorship：Lead author   Language：Japanese   Publishing type：Research paper (scientific journal)  

DOI： 10.2493/jjspe.69.542

Open Access

Ductile mode machining of sintered carbide by applying ultrasonic elliptical vibration cutting Reviewed

Eiji SHAMOTO, Ken IENAGA and Toshimichi MORIWAKI

  Vol. 47 ( 02 ) page： 83-87   2003.2

　More details

Authorship：Lead author   Language：Japanese   Publishing type：Research paper (scientific journal)  

Measurement of Acceleration Applied to Javelin during Throwing Reviewed

Masato Maeda and Eiji Shamoto

The Engineering of Sport 4th International Conference     page： 553-559   2002.9

　More details

Language：English   Publishing type：Research paper (scientific journal)  

Development of Ultrasonic Elliptical Vibration Controller for Elliptical Vibration Cutting Reviewed

Eiji Shamoto, Norikazu Suzuki, Toshimichi Moriwaki, Yoshikazu Naoi

Annals of the CIRP   Vol. 51 ( 01 ) page： 327-330   2002.8

　More details

Authorship：Lead author   Language：English   Publishing type：Research paper (scientific journal)  

DOI： 10.1016/S0007-8506(07)61528-5

EFFECTS OF BODY FAT AS WEIGHT LOAD ON PHYSICAL ACTIVITY (2nd REPORT)EFFECTS OF FAT IN ALL BODY AND EACH PHYSICAL PART Reviewed

Eiji Shamoto, Chikako Matsuda, Toshimichi Moriwaki

  Vol. 7 ( 3 ) page： 139-143   2002.8

　More details

Authorship：Lead author   Language：Japanese   Publishing type：Research paper (scientific journal)  

Study on Three Dimensional Cutting Mechanics (1st Report)- Comprehension and Vector Formulation of Oblique Cutting Process Reviewed Open Access

  Vol. 68 ( 03 ) page： 408-414   2002.3

　More details

Authorship：Lead author   Language：Japanese   Publishing type：Research paper (scientific journal)  

DOI： 10.2493/jjspe.68.408

Open Access

Development of Elliptical Vibration Milling Machine and its Application to End Milling of Hardened Steel Reviewed

SONG YoungChan, Toshimichi MORIWAKI, Eiji SHAMOTO, Hideki YOSHIDA and Norikazu SUZUKI

Memoirs of the Faculty Engineering, Kobe University   Vol. 49   page： 41-55   2002

　More details

Language：English   Publishing type：Research paper (bulletin of university, research institution)  

Elliptical Vibration Cutting (4th Report) - Development of Tool Vibration Control System and Its Application to Ultraprecision Cutting - Reviewed Open Access

Eiji SHAMOTO, Norikazu SUZUKI, Toshimichi MORIWAKI and Yoshikazu NAOI

  Vol. 67 ( 11 ) page： 1871-1877   2001.11

　More details

Authorship：Lead author   Language：Japanese   Publishing type：Research paper (scientific journal)  

DOI： 10.2493/jjspe.67.1871

Open Access

Analysis and Improvement of Motion Accuracy of Hydrostatic Feed Table Reviewed

Eiji Shamoto, Chun-Hong Park, Toshimichi Moriwaki

Annals of the CIRP   Vol. 50 ( 1 ) page： 285-290   2001.8

　More details

Authorship：Lead author   Language：English   Publishing type：Research paper (scientific journal)  

DOI： 10.1016/S0007-8506(07)62123-4

Resent Development in Ultraprecision Machining and Machine Tool Technology Invited Reviewed

Toshimichi Moriwaki and Eiji Shamoto

International seminar on precision engineering and micro technology (Euspen)     page： 161-170   2000.7

　More details

Language：English   Publishing type：Research paper (international conference proceedings)  

Prediction of Shear Angle in Oblique Cutting with Maximum Shear Stress and Minimum Energy Principles Reviewed

Eiji Shamoto and Yusuf Altintas

Trans. ASME Journal of Manufacturing Science and Engineering   Vol. 1 ( 121 ) page： 399-407   1999.8

　More details

Authorship：Lead author   Language：English   Publishing type：Research paper (scientific journal)  

DOI： 10.1115/1.2832695

Ultraprecision Ductile Cutting of Glass by Applying Ultrasonic Elliptical Vibration Cutting Reviewed

Eiji Shamoto, Chun-Xiang Ma and Toshimichi Moriwaki

Proc. of 1st International Conference and general meeting of the European Society for Precision Engineering and Nanotechnology (EUSPEN)     page： 408-411   1999.5

　More details

Authorship：Lead author   Language：English   Publishing type：Research paper (international conference proceedings)  

Regenerative Chatter Suppression in Turning by Applying Ultrasonic Elliptical Vibration Reviewed

C. Ma, E. Shamoto, B. Sattayawuthiphong, T. Moriwaki

Memoirs of Graduate School of Science & Technology, Kobe Univ   Vol. 17 ( A ) page： 47-62   1999.3

　More details

Language：English   Publishing type：Research paper (bulletin of university, research institution)  

Elliptical Vibration Cutting(2nd report, Study on Effects of Vibration Conditions) Reviewed Open Access

  Vol. 65 ( 3 ) page： 411-417   1999.3

　More details

Authorship：Lead author   Language：Japanese   Publishing type：Research paper (scientific journal)  

DOI： 10.2493/jjspe.65.411

Open Access

A Study on Evaluation of Physical Activity in Relation to Body Fat Reviewed

Chikako Matsuda, Eiji Shamoto, Toshimichi Moriwaki, Norimasa Misaki

Memoirs of Graduate School of Science & Technology, Kobe Univ   Vol. 17 ( A ) page： 63-69   1999.3

　More details

Language：English   Publishing type：Research paper (bulletin of university, research institution)  

Analysis of Thermal Deformation of an Ultraprecision Air Spindle System Reviewed

Toshimichi Moriwaki, Eiji Shamoto

Annals of the CIRP   Vol. 47 ( 01 ) page： 315-319   1998.8

　More details

Language：English   Publishing type：Research paper (scientific journal)  

Development of an Intelligent Turning Machine Equipped with Open-Architecture CNC Controller to Compensate Thermal Deformation of Machine Tool Reviewed

Toshimichi MORIWAKI, Rei HINO, Noritaka FUJIMURA,Eiji SHAMOTO, Hidetaka SHIBATA and Masayuki NASHIKI

Proceedings of the International Seminar on Improving Machine Tool Performance     page： 317-332   1998.7

　More details

Language：English   Publishing type：Research paper (international conference proceedings)  

Intelligent Tool Condition Monitoring for Milling Reviewed

Toshimichi Moriwaki and Eiji Shamoto

CIRP Journal of Manufacturing Systems   Vol. 27 ( 3 ) page： 327-332   1998

　More details

Language：English   Publishing type：Research paper (scientific journal)  

ヤリの弾性を考慮に入れたやり投げの力学的解析 Reviewed Open Access

前田 正登，野村 治夫，社本 英二，森脇 俊道

体育学研究   Vol. 42 ( 4 ) page： 270-282   1997.12

　More details

Language：Japanese   Publishing type：Research paper (scientific journal)  

DOI： 10.5432/jjpehss.kj00003391590

Open Access

Prediction of Thermal Deformation of Machine Tool with Strain Sensor Reviewed

Toshimichi Moriwaki, Eiji Shamoto, Masahiro Kawano

1997 ASME International Mechanical Engineering Congress & Exposition MED-Vol.6-1, Manufacturing Science and Technology   Vol. 1   page： 137-142   1997.11

　More details

Language：English   Publishing type：Research paper (international conference proceedings)  

周囲気温変化による超精密工作機械の熱変形－伝達関数による熱変形特性の検討とたたみこみ積分による推定 Reviewed Open Access

森脇 俊道，社本 英二，徳永 剛志

日本機械学会論文集Ｃ編   Vol. 63 ( 615 ) page： 4025-4030   1997.11

　More details

Language：Japanese   Publishing type：Research paper (scientific journal)  

DOI： 10.1299/kikaic.63.4025

Open Access

Prediction of Shear Angle in Oblique Cutting with Maximum Shear Stress and Minimum Energy Principles Reviewed

Eiji Shamoto and Yusuf Altintas

1997 ASME International Mechanical Engineering Congress & Exposition, MED-Vol.6-1, Manufacturing Science and Technology   Vol. 1   page： 121-128   1997.11

　More details

Authorship：Lead author   Language：English   Publishing type：Research paper (international conference proceedings)  

Rigid XYθ table for Ultraprecision Machine Tool Driven by Means of Walking Drive Reviewed

Eiji Shamoto and Toshimichi Moriwaki

Annals of the CIRP   Vol. 46 ( 1 ) page： 301-304   1997.8

　More details

Authorship：Lead author   Language：English   Publishing type：Research paper (scientific journal)  

Coupling Mechanism for High Precision Feed Table with Ballscrew Reviewed

Chun-hong Park, Toshimichi Moriwaki and Eiji Shamoto

Proc. of JSME Centennial Grand Congress, Int. Conf. on Manuf. Milestones toward the 21st Century MM21     page： 139-143   1997.7

　More details

Language：English   Publishing type：Research paper (international conference proceedings)  

Ultraprecision Diamond Cutting of Die Steel by Applying Ultrasonic Elliptical Vibration Cutting Reviewed

Eiji Shamoto, Toshimichi Moriwaki and Makoto Matsuo

International Conference and Exhibition on Design and Production of Dies and Molds     page： 105-110   1997.6

　More details

Authorship：Lead author   Language：English   Publishing type：Research paper (international conference proceedings)  

Intelligent Tool Condition Monitoring for Milling Reviewed

Toshimichi Moriwaki and Eiji Shamoto

29th CIRP Int. Seminar on Manufacturing Systems     page： 287-292   1997.5

　More details

Language：English   Publishing type：Research paper (international conference proceedings)  

Ultraprecision Continuous Path Control for Walking Drive Reviewed

Eiji Shamoto and Toshimichi Moriwaki

Proc. of 9th Int. Precision Engineering Seminar / 4th Int. Conf. on Ultraprecision in Manufacturing Engineering   Vol. 12   page： 484-487   1997.5

　More details

Authorship：Lead author   Language：English   Publishing type：Research paper (international conference proceedings)  

Ultraprecision Continuous Path Control for Walking Drive Reviewed

Eiji Shamoto and Toshimichi Moriwaki

Progress in Precision Engineering and Nanotechnology, Proc. of 9th Int. Precision Engineering Seminar / 4th Int. Conf. on Ultraprecision in Manufacturing Engineering     page： 484-487   1997.5

　More details

Authorship：Lead author   Language：English   Publishing type：Research paper (international conference proceedings)  

The Development of a `Walking Drive' Ultraprecision Positioner Reviewed

Eiji Shamoto and Toshimichi Moriwaki

Precision Engineering   Vol. 20 ( 2 ) page： 85-92   1997.3

　More details

Authorship：Lead author   Language：English   Publishing type：Research paper (scientific journal)  

Dynamic Analysis of Force and Deflection Applied to Javelin in Javelin Throw Reviewed

    page： 294-298   1997.3

　More details

Language：Japanese   Publishing type：Research paper (scientific journal)  

Vibration Assisted Micro-Machining of Alloy Steel Reviewed

Toshimichi Moriwaki, Eiji Shamoto and Daisuke Eguchi

Proc. of 3rd Int. Conf. on Progress of Cutting and Grinding   Vol. III   page： 251-255   1996.11

　More details

Language：English   Publishing type：Research paper (international conference proceedings)  

Analytical Prediction of Stability Lobes in Ball End Milling Reviewed

Yusuf Altintas, Eiji Shamoto, Peter Lee and Erhan Budak

ASME 1996 Winter Annual Meeting, Materials Issues in Machining - III and The Physics of Machining Processes -III, Publication of TMS, ISBN 0-87339-345-7     page： 151-167   1996.11

　More details

Language：English   Publishing type：Research paper (international conference proceedings)  

Development of 6 Axis Force Sensor for Javelin Throw Reviewed

Eiji Shamoto, Masato Maeda, Toshimichi Moriwaki and Haruo Nomura

Reprint from Int. J. of JSPE   Vol. 30 ( 3 ) page： 276-277   1996.9

　More details

Authorship：Lead author   Language：English   Publishing type：Research paper (scientific journal)  

Elliptical Vibration Cutting(1st Report, Cutting Principle and Basic Performance) Reviewed Open Access

  Vol. 62 ( 8 ) page： 1127-1131   1996.8

　More details

Authorship：Lead author   Language：Japanese   Publishing type：Research paper (scientific journal)  

DOI： 10.2493/jjspe.62.1127

Open Access

Ultraprecision Feed System Based on Walking Drive Reviewed

Toshimichi Moriwaki and Eiji Shamoto

Annals of the CIRP   Vol. 45 ( 1 ) page： 505-508   1996.8

　More details

Language：English   Publishing type：Research paper (scientific journal)  

Development of Work Clamping System Equipped with Force Sensors and Actuators Reviewed

Toshimichi Moriwaki, Eiji Shamoto, Rei Hino and Jer-Wen Chen

The Fourth International Conference on Automation Technology, Hsinchu, Taiwan     page： 489-494   1996.7

　More details

Language：English   Publishing type：Research paper (international conference proceedings)  

Modeling and Monitoring of Milling Process for Intelligent Control of Machine Tool Invited Reviewed

Toshimichi Moriwaki, Eiji Shamoto and Rei Hino

Proc. of the 3rd CIRP Workshop on Design and Implementation of Intelligent Manufacturing Systems, Tokyo, Japan     page： 184-192   1996.6

　More details

Language：English   Publishing type：Research paper (international conference proceedings)  

Thermal Deformation of Ultraprecision Spindle due to Environmental Temperature Change Reviewed

Toshimichi Moriwaki, Eiji Shamoto and Tsuyoshi Tokunaga

International Conference on Precision Engineering `95     page： 122-125   1995.11

　More details

Language：English   Publishing type：Research paper (international conference proceedings)  

Ultraprecision Feed Drive System Based on Walking Drive Reviewed

Eiji Shamoto, Heungchul Shin and Toshimichi Moriwaki

International Conference on Precision Engineering `95     page： 81-84   1995.11

　More details

Authorship：Lead author   Language：English   Publishing type：Research paper (international conference proceedings)  

Ultrasonic Elliptical Vibration Cutting Reviewed

Toshimichi Moriwaki and Eiji Shamoto

Annals of the CIRP   Vol. 44 ( 1 ) page： 31-34   1995.8

　More details

Language：English   Publishing type：Research paper (scientific journal)  

Development of Precision Feed Mechanism by Applying Principle of Walking Drive (2nd Report, Development of Feed Velocity Control Method and Ultraprecision Positioning System) Reviewed Open Access

  Vol. 61 ( 8 ) page： 1106-1110   1995.8

　More details

Authorship：Lead author   Language：Japanese   Publishing type：Research paper (scientific journal)  

DOI： 10.2493/jjspe.61.1106

Open Access

Milling State Recognition based on Dynamic Cutting Force Model (1st Report, Parameter Identification by Optimization Method and Estimation of Tool Wear) Reviewed Open Access

  Vol. 61 ( 586 ) page： 2592-2598   1995.6

　More details

Language：Japanese   Publishing type：Research paper (scientific journal)  

DOI： 10.1299/kikaic.61.2592

Open Access

Ultraprecision Ductile Cutting of Glass by Applying Ultrasonic Elliptical Vibration Cutting Reviewed

Eiji Shamoto, Chun-Xiang Ma, Toshimichi Moriwaki

Proc. of 1st International Conference and general meeting of the European Society for Precision Engineering and Nanotechnology (EUSPEN)     page： 408-411   1995.5

　More details

Authorship：Lead author   Language：English   Publishing type：Research paper (international conference proceedings)  

Ultrasonic Vibration Cutting Applied to Ultraprecision Machining - A New Possibility for Ultraprecision Machining of Hard to Machine Materials Reviewed

Toshimichi Moriwaki, Eiji Shamoto

8th International Precision Engineering Seminar     page： 298-301   1995.5

　More details

Language：English   Publishing type：Research paper (international conference proceedings)  

Development of Ultraprecision Positioner by Means of Walking Drive Reviewed

Eiji Shamoto, Takahiro Yamaguchi, Toshimichi Moriwaki

7th International Precision Engineering Seminar     page： 1031-1042   1995.5

　More details

Authorship：Lead author   Language：English   Publishing type：Research paper (international conference proceedings)  

ニューラルネットワークによる工作機械の熱変形予測－機械表面温度の時間履歴を考慮することによる予測精度の向上 Reviewed Open Access

森脇 俊道，社本 英二，河野 昌弘

日本機械学会論文集Ｃ編   Vol. 61 ( 584 ) page： 1691-1696   1995.4

　More details

Language：Japanese   Publishing type：Research paper (scientific journal)  

DOI： 10.1299/kikaic.61.1691

Open Access

Model Based Monitoring of Milling Process Reviewed

Toshimichi Moriwaki and Eiji Shamoto

Proc. of CIRP/VDI Conference, Düsseldorf, Germany     page： 115-126   1995.3

　More details

Language：English   Publishing type：Research paper (international conference proceedings)  

Modeling and Parameter Identification of End Milling for Estimation of Dynamic Cutting Force Reviewed

Toshimichi Moriwaki and Eiji Shamoto

Proc. of Pacific Conference on Manufacturing 1994, Jakarta, Indonesia     page： 97-103   1994.12

　More details

Language：English   Publishing type：Research paper (international conference proceedings)  

Study on Elliptical Vibration Cutting Reviewed

Eiji Shamoto and Toshimichi Moriwaki

Annals of the CIRP   Vol. 43 ( 1 ) page： 35-38   1994.8

　More details

Authorship：Lead author   Language：English   Publishing type：Research paper (scientific journal)  

やり投においてヤリに加わる力の測定 Reviewed Open Access

前田 正登，野村 治夫，社本 英二，森脇 俊道

体育学研究   Vol. 39 ( 2 ) page： 109-117   1994.7

　More details

Language：Japanese   Publishing type：Research paper (scientific journal)  

DOI： 10.5432/jjpehss.kj00003392016

Open Access

Development of Ultraprecision XYθ Table Driven by Means of Walking Drive Reviewed

Eiji Shamoto, Takahiro Yamaguchi and Toshimichi Moriwaki

Proc. of the 3rd Int. Conf. on Ultraprecision in Manufacturing Engineering (UME 3)     page： 139-142   1994.5

　More details

Authorship：Lead author   Language：English   Publishing type：Research paper (international conference proceedings)  

Precision Feed Mechanism Utilizing Piezoelectric Actuators Reviewed

Heungchul Shin, Eiji Shamoto and Tochimichi Moriwaki

Mem. Grad. School Sci. & Technol., Kobe Univ   Vol. 12 ( A ) page： 175-186   1994.3

　More details

Language：English   Publishing type：Research paper (bulletin of university, research institution)  

Fundamental Study on Elliptical Vibration Cutting Reviewed

Eiji Shamoto and Toshimichi Moriwaki

Proc. of the 8th Annual Meeting, The American Society for Precision Engineering (ASPE)     page： 162-165   1993.11

　More details

Authorship：Lead author   Language：English   Publishing type：Research paper (international conference proceedings)  

Fundamental Study on Elliptical Vibration Cutting Reviewed

Eiji Shamoto and Toshimichi Moriwaki

Proc. of the 8th Annual Meeting, The American Society for Precision Engineering (ASPE)     page： 162-165   1993.11

　More details

Authorship：Lead author   Language：English   Publishing type：Research paper (international conference proceedings)  

やりの動特性と競技成績 Open Access

前田 正登，野村 治夫，社本 英二，森脇 俊道，柳田 泰儀

スポーツ産業学研究   Vol. 3 ( 2 ) page： 15-20   1993.9

　More details

Language：Japanese   Publishing type：Research paper (scientific journal)  

DOI： 10.5997/sposun.3.2_15

Open Access

Development of Ultraprecision Positioner by Means of Walking Drive Reviewed

Eiji Shamoto, Takahiro Yamaguchi and Toshimichi Moriwaki

7th International Precision Engineering Seminar     page： 1031-1042   1993.5

　More details

Authorship：Lead author   Language：English   Publishing type：Research paper (international conference proceedings)  

Ultraprecision Ductile Cutting of Brittle Materials by Applying Ultrasonic Vibration Reviewed

Toshimichi Moriwaki and Eiji Shamoto

7th International Precision Engineering Seminar     page： 708-718   1993.5

　More details

Language：English   Publishing type：Research paper (international conference proceedings)  

Walking Drive による精密送り機構の開発(第１報)－ Walking Drive の駆動原理と基本特性 Reviewed Open Access

社本 英二，申 興哲，森脇 俊道

精密工学会誌   Vol. 59 ( 2 ) page： 317-322   1993.2

　More details

Authorship：Lead author   Language：Japanese   Publishing type：Research paper (scientific journal)  

DOI： 10.2493/jjspe.59.317

Open Access

競技用ヤリの動特性 Reviewed Open Access

前田 正登，野村 治夫，森脇 俊道，社本 英二

Japanese Journal of Sports Sciences   Vol. 12 ( 2 ) page： 130-136   1993.2

　More details

Language：Japanese   Publishing type：Research paper (scientific journal)  

Open Access

Walking Drive -A New Precision Feed Drive Reviewed

Eiji Shamoto and Toshimichi Moriwaki

Robotics, Mechatronics and Manufacturing Systems     page： 497-502   1993

　More details

Authorship：Lead author   Language：English   Publishing type：Research paper (scientific journal)  

Application of Ultrasonic Vibration to Ultraprecision Diamond Cutting of Difficult to Machine Materials Reviewed

T.Moriwaki and E.Shamoto

The 4th Sino-Japan Joint Seminar on Ultraprecision Technology     page： 27-34   1992.11

　More details

Language：English   Publishing type：Research paper (scientific journal)  

Application of Ultrasonic Vibration to Ultraprecision Diamond Cutting of Difficult to Machine Materials Reviewed

T.Moriwaki and E.Shamoto

The 4th Sino-Japan Joint Seminar on Ultraprecision Technology     page： 27-34   1992.11

　More details

Language：English   Publishing type：Research paper (international conference proceedings)  

Ultraprecision Diamond Turning of Hardened Die Steel by Applying Ultrasonic Vibration Reviewed

Toshimichi Moriwaki and Eiji Shamoto

Proc. of The 1st China-Japan Int. Conf. on Progress of Cutting and Grinding     page： 64-69   1992.11

　More details

Language：English   Publishing type：Research paper (international conference proceedings)  

Ultraprecision Ductile Cutting of Glass by Applying Ultrasonic Vibration Reviewed

Toshimichi Moriwaki, Eiji Shamoto and Kenji Inoue

Annals of the CIRP   Vol. 41 ( 1 ) page： 141-144   1992.8

　More details

Language：English   Publishing type：Research paper (scientific journal)  

Walking Drive -A New Precision Feed Drive Reviewed

E.Shamoto and T.Moriwaki

Proc. of the IMACS/SICE International Symposium on Robotics, Mechatronics and Manufacturing Systems '92 Kobe     page： 231-236   1992

　More details

Authorship：Lead author   Language：English  

ステンレス鋼の超精密超音波振動切削加工の研究 Reviewed Open Access

森脇 俊道，社本 英二，井上 健二

精密工学会誌   Vol. 57 ( 11 ) page： 1983-1988   1991.11

　More details

Language：Japanese   Publishing type：Research paper (scientific journal)  

DOI： 10.2493/jjspe.57.1983

Open Access

Ultra-Precision Diamond Turning of Stainless Steel by Applying Ultrasonic Vibration Reviewed

Toshimichi Moriwaki and Eiji Shamoto

Annals of the CIRP   Vol. 40 ( 1 ) page： 559-562   1991.8

　More details

Language：English   Publishing type：Research paper (scientific journal)  

Study of Press-Processing Methods for Brittle Sheets Reviewed Open Access

Katsumi Yamaguchi, Eiji Shamoto, Masahide Sato

JSME Series Ⅲ   Vol. 33 ( 4 ) page： 583-589   1990.12

　More details

Language：English   Publishing type：Research paper (scientific journal)  

DOI： 10.1299/jsmec1988.33.583

Open Access

脆性板のプレス加工における加工可能条件の総合的検討 Reviewed Open Access

山口 勝美，社本 英二，佐藤 正英

日本機械学会論文集Ｃ編   Vol. 55 ( 516 ) page： 2237-2244   1989.8

　More details

Language：Japanese   Publishing type：Research paper (scientific journal)  

DOI： 10.1299/kikaic.55.2237

Open Access

Pressure Blanking of Sheet Glass Reviewed Open Access

Katsumi Yamaguchi, Eiji Shamoto, Mikihiro Torii

JSME Series Ⅲ   Vol. 32 ( 2 ) page： 338-342   1989.6

　More details

Language：English   Publishing type：Research paper (scientific journal)  

DOI： 10.1299/jsmec1988.32.338

Open Access

ガラス板の加圧ブランキング Reviewed Open Access

山口 勝美，社本 英二，鳥居 幹広

日本機械学会論文集Ｃ編   Vol. 54 ( 502 ) page： 1357-1361   1988.6

　More details

Language：Japanese   Publishing type：Research paper (scientific journal)  

DOI： 10.1299/kikaic.54.1357

Open Access

Punching Holes in Sheet Glass under High Pressure Reviewed

Katsumi Yamaguchi, Kiyoshi Isogimi, Eiji Shamoto, Junichi Kojima

JSME   Vol. 30 ( 269 ) page： 1833-1839   1987.11

　More details

Language：English   Publishing type：Research paper (scientific journal)  

高静圧下におけるガラス板の打抜き加工 Reviewed Open Access

山口 勝美，五十君 清司，社本 英二，小嶋 純一

日本機械学会論文集Ｃ編   Vol. 52 ( 483 ) page： 2967-2973   1986.11

　More details

Language：Japanese   Publishing type：Research paper (scientific journal)  

DOI： 10.1299/kikaic.52.2967

Open Access