Papers - SHAMOTO Eiji

Study on extraordinarily-high-speed cutting mechanics and its application to dry cutting of aluminum alloys with non-coated carbide tools Invited Reviewed International coauthorship

Jun Eto, Takehiro Hayasaka*, Eiji Shamoto, Liangji Xu

Journal of Manufacturing and Materials Processing   Vol. 8 ( 5 ) page： 198   2024.9

　More details

Authorship：Last author   Language：English   Publishing type：Research paper (scientific journal)  

DOI： https://doi.org/10.3390/jmmp8050198

“L-stock method” – High-efficiency high-chatter-stability high-precision thin-wall milling strategy with aggressive use of plunge milling Reviewed

Takehiro Hayasaka, Keigo Miyagawa, Kyungki Lee, Akira Saito, Eiji Shamoto

CIRP Annals – Manufacturing Technology   Vol. 73 ( 1 ) page： 289 - 292   2024.5

　More details

Authorship：Last author   Language：English   Publishing type：Research paper (scientific journal)  

DOI： https://doi.org/10.1016/j.cirp.2024.04.085

Novel real-time monitoring method of depths of cut and runout for milling process utilizing FFT analysis of cutting torque Invited Reviewed

Kyungki Lee, Takehiro Hayasaka, Eiji Shamoto

Precision Engineering   Vol. 81   page： 36 - 49   2023.5

　More details

Authorship：Corresponding author   Language：English   Publishing type：Research paper (scientific journal)  

DOI： https://doi.org/10.1016/j.precisioneng.2023.01.010

A new hypothesis of steady-state flank wear progression of cutting tools with similar geometry and its verification Invited Reviewed

Ryosuke Kataoka, Eiji Shamoto

Precision Engineering   Vol. 81   page： 183 - 191   2023.5

　More details

Authorship：Corresponding author   Language：English   Publishing type：Research paper (scientific journal)  

DOI： https://doi.org/10.1016/j.precisioneng.2023.01.007

Proposal of novel chatter-free milling strategy utilizing extraordinarily numerous flute endmill and high-speed high-power machine tool Invited Reviewed

Jun Eto, Takehiro Hayasaka, Eiji Shamoto

Precision Engineering   Vol. 80   page： 95 - 103   2023.3

　More details

Authorship：Last author   Language：English   Publishing type：Research paper (scientific journal)  

DOI： https://doi.org/10.1016/j.precisioneng.2022.11.007

Novel rotational center self-identification of machine tool by utilizing multiple tool-workpiece contacts with redundant-axis movement Reviewed

Kyungki Lee, Takehiro Hayasaka, Soohyun Nam, Eiji Shamoto

Precision Engineering   ( 79 ) page： 185 - 189   2023.1

　More details

Authorship：Last author   Language：English   Publishing type：Research paper (scientific journal)  

DOI： https://doi.org/10.1016/j.precisioneng.2022.09.012

Parameter identification for linear model of the milling process using spindle speed variation Reviewed

Kazuki Takahei, Satoshi Miwa, Eiji Shamoto, Norikazu Suzuki

Precision Engineering   Vol. 79   page： 16 - 33   2023.1

　More details

Language：English   Publishing type：Research paper (scientific journal)  

DOI： https://doi.org/10.1016/j.precisioneng.2022.08.011

Identification of the model parameter for milling process simulation with sensor-integrated disturbance observer Reviewed

Kazuki Takahei, Norikazu Suzuki, Eiji Shamoto

Precision Engineering   Vol. 78   page： 146 - 162   2022.11

　More details

Authorship：Last author   Language：English   Publishing type：Research paper (scientific journal)  

DOI： https://doi.org/10.1016/j.precisioneng.2022.07.013

A new real-time trajectory generation method modifying trajectory based on trajectory error and angular speed for high accuracy and short machining time Reviewed

Kousuke Ishizaki, Eiji Shamoto

Precision Engineering   Vol. 76   page： 173 - 189   2022.7

　More details

Authorship：Last author,　Corresponding author   Language：English   Publishing type：Research paper (scientific journal)  

DOI： https://doi.org/10.1016/j.precisioneng.2022.02.012

“Multimode Vibration Cutting” – A New Vibration Cutting for Highly-efficient and Highly-flexible Surface Texturing Reviewed

Hongjin Jung, Takehiro Hayasaka, Eiji Shamoto, Hiroaki Ishii, Takashi Ueyama, Seiji Hamada

Precision Engineering   Vol. 72   page： 111 - 121   2021.11

　More details

Authorship：Last author   Language：English   Publishing type：Research paper (scientific journal)  

DOI： https://doi.org/10.1016/j.precisioneng.2021.04.003

“Peel cutting” – a new cutting method for difficult-to-cut workpieces with hard oxide surfaces Reviewed

Tomohiro Komiyama, Eiji Shamoto, Ikuya Onozato, Koichi Akazawa

Precision Engineering   Vol. 72   page： 613 - 619   2021.11

　More details

Authorship：Corresponding author   Language：English   Publishing type：Research paper (scientific journal)  

DOI： https://doi.org/10.1016/j.precisioneng.2021.07.003

Unique Regenerative Chatter in Wiper-Turning Operation with Burnishing Process, Part 2: Experimental Verification of Predicted Generation Mechanism, Critical Stability, and Characteristics Reviewed

Mitsunori Hirose, Takehiro Hayasaka, Eiji Shamoto

Precision Engineering   Vol. 71   page： 313 - 323   2021.9

　More details

Authorship：Last author   Language：English   Publishing type：Research paper (scientific journal)  

DOI： https://doi.org/10.1016/j.precisioneng.2020.05.012

Unique regenerative chatter in wiper-turning operation with burnishing process Part 1: Prediction and analytical investigation of generation mechanism, critical stability, and characteristics Reviewed

Mitsunori Hirose, Takehiro Hayasaka, Eiji Shamoto

Precision Engineering   Vol. 71   page： 304 - 312   2021.9

　More details

Authorship：Last author   Language：English   Publishing type：Research paper (scientific journal)  

DOI： https://doi.org/10.1016/j.precisioneng.2020.05.011

Dynamic contour error compensation in micro/nano machining of hardened steel by applying elliptical vibration sculpturing method Reviewed

Zhang Jianguo, Suzuki Norikazu, Shamoto Eiji, Xu Jianfeng

PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY   Vol. 71   page： 250 - 262   2021.9

　More details

Authorship：Last author   Language：English   Publishing type：Research paper (scientific journal)  

DOI： 10.1016/j.precisioneng.2021.03.017

Web of Science

Analytical Prediction of Chatter Stability for Modulated Turning Reviewed

Soohyun Nam, Bora Eren, Takehiro Hayasaka, Burak Sencer, Eiji Shamoto

International Journal of Machine Tools and Manufacture   Vol. 165   page： 103739   2021.6

　More details

Authorship：Last author   Language：English   Publishing type：Research paper (scientific journal)  

DOI： https://doi.org/10.1016/j.ijmachtools.2021.103739

Proposal of ‘ImpEC (impact excitation cutting)’ for realization of high-flexibility and high-efficiency micro/nano surface texturing Reviewed

Takehiro Hayasaka, Pinzhang Sun, Hongjin Jung, Yudai Mizutani, Eiji Shamoto

CIRP Annals – Manufacturing Technology   Vol. 70 ( 1 ) page： 41 - 44   2021.5

　More details

Authorship：Last author   Language：English   Publishing type：Research paper (scientific journal)  

DOI： https://doi.org/10.1016/j.cirp.2021.04.023

Development of a novel boring tool with anisotropic dynamic stiffness to avoid chatter vibration in cutting Part 1: Design of anisotropic structure to attain infinite dynamic stiffness Reviewed

Takahashi Wataru, Suzuki Norikazu, Shamoto Eiji

PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY   Vol. 68   page： 57 - 71   2021.3

　More details

Language：English  

DOI： 10.1016/j.precisioneng.2020.11.007

Web of Science

Proposal of novel spindle speed variation profile with constant acceleration rate for improvement of chatter stability Reviewed

Nam Soohyun, Hayasaka Takehiro, Jung Hongjin, Shamoto Eiji

PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY   Vol. 68   page： 218 - 234   2021.3

　More details

Authorship：Last author   Language：English   Publishing type：Research paper (scientific journal)  

DOI： 10.1016/j.precisioneng.2020.12.008

Web of Science

Influence of flank texture patterns on the suppression of chatter vibration and flank adhesion in turning operations Reviewed

PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY   Vol. 68   page： 262 - 272   2021.3

　More details

Language：English  

DOI： 10.1016/j.precisioneng.2020.12.007

Web of Science

Development of a novel boring tool with anisotropic dynamic stiffness to avoid chatter vibration in cutting Part2:Analytical and experimental verification of the proposed method Reviewed

Wataru Takahashi, Norikazu Suzuki, Eiji Shamoto

PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY   Vol. 68   page： 20 - 34   2021.3

　More details

Language：English  

DOI： 10.1016/j.precisioneng.2020.11.008