日本計算数理工学会

2021.10

Best Sessional Presentation Award

2017.6   The 26th Canadian Congress on Applied Mechanics  

Electric current-driven heterogeneous microstructures in dual-phase titanium alloys Invited Reviewed International coauthorship Open Access

Shaojie Gu, Yasuhiro Kimura, Yi Cui, Yasuyuki Morita, Sora Isoi, Chang Liu, Xinming Yan, Bingfeng Ju, Huayong Yang, Yuhki Toku and Yang Ju

Nature Communications   Vol. 17 ( 1 ) page： 3470   2026

Thermal and athermal effects of high-density pulsed electric current on strain-hardening relief in cold-rolled A6061 under liquid nitrogen Invited Reviewed Open Access

1. Gu, S., Yu, X., Peng, Y., Wang, L., Yoon, S., Cui, Y., Kimura, Y., Morita, Y., Toku, Y., Ju, Y.

Journal of Manufacturing and Materials Processing   Vol. 10 ( 6 ) page： 189   2026

Atomistic and physics-informed neural network investigation of interfacial debonding in differently aligned nanoinclusions Invited Reviewed

Sheng, P., Yang, W., Gu, S., Yoon, S., Chen, Z., Cui, Y.

Computational Materials Science   Vol. 269   page： 114733   2026

Electric current-driven microstructural recovery and crack resistance enhancement in Ni-based superalloy Inconel 718 Invited Reviewed Open Access

4. Gu, S., Yoon, S., Liu, C., Peng, Y., Cui, Y., Kimura, Y., Toku, Y., Morita, Y., Ju, Y.

Materials Science and Engineering: A   Vol. 953   page： 149781   2026

Electric current-induced crack healing: Mechanisms and scale-specific insights Invited Reviewed International coauthorship Open Access

Shaojie Gu, Daisuke Kobayashi, Sungmin Yoon, Chang Liu, Yanhong Peng, Yi Cui, Yasuhiro Kimura, Yuhki Toku, Yasuyuki Morita, Yang Ju

International Journal of Fatigue   Vol. 201   page： 109171   2025

Topology optimization of eigenvalues for elastic structures by topological derivatives and time domain response Invited Reviewed Open Access

Ren, H.,Cui, Y.,Takahashi, T.,Matsumoto, T.

Mechanical Engineering Journal   Vol. 12 ( 5 ) page： 25-00129   2025

Rapid recovery of work hardening in stainless steel via high-density pulsed electric current: Impact of athermal effect Invited Reviewed International coauthorship Open Access

Shaojie Gu, Chang Liu, Yi Cui, Xinming Yan, Yasuhiro Kimura, Yasuyuki Morita, Yuhki Toku, Yang Ju

Nano Micro Mechanics Review   Vol. 1 ( 1 ) page： 39 - 52   2025

Dynamic topology optimization of anisotropic structures based on topological derivative in the frequency domain Invited Reviewed Open Access

Shuzhan ZHOU, Yi CUI, Toru TAKAHASHI, Toshiro MATSUMOTO

Transactions of the Japan Society for Computational Methods in Engineering   Vol. 25   page： 215 - 224   2025

Multi-scale investigation on heterogeneous damage in cutting of Al/SiCp composites Invited Reviewed

Sun, W., Deng, Q., Zhang, C., Chen, J., Chen, J., Li, Y., Zhang, S., Sheng, P., Cui, Y.

Journal of Manufacturing Processes   Vol. 151   page： 752 - 771   2025

A shape optimisation of mutual inductances among coils

Takahashi, T.,Tokito, T.,Cui, Y.,Matsumoto, T.

Applied Mathematical Modelling   Vol. 148   page： 116257   2025

Transient heat conduction in the cracked medium by Guyer–Krumhansl model Reviewed International coauthorship

Yang W, Gao R, Liu Z, Cui Y, Pourasghar A, Chen Z.

International Journal of Fracture   Vol. 246   page： 145 - 160   2024

Ultrahigh deformability of Ti-6Al-4V assisted by high-density pulsed electric current treatment Reviewed International coauthorship

1. S Gu, C Liu, Y Toku, Y Kimura, S Yoon, S Li, Y Cui, Y Ju

Journal of Alloys and Compounds   Vol. 973   page： 172892   2024

Investigation on cutting deformation behavior of Al/SiCp composites considering particle feature distributions Reviewed International coauthorship

Sheng, P.,Chen, Y.,Sun, W.,Cui, Y.,Xiong, D.

Journal of Manufacturing Processes   Vol. 119   page： 204 - 223   2024

Micromachined structures decoupling Joule heating and electron wind force Reviewed International coauthorship Open Access

Gu, S., Kimura, Y., Yan, X., Liu, C, Cui, Y., Ju. Y., Toku, Y.

Nature Communications   Vol. 15 ( 1 ) page： 6044   2024

Exact treatment of volume constraint for RDE-based topology optimization of elastoplastic structures Reviewed Open Access

Cui, Y., Yang, W., Gu, S., Matsumoto, T.

Engineering Analysis with Boundary Elements   Vol. 168   page： 105888   2024

Transient thermal fracture investigation of a cracked functionally graded layer via Guyer-Krumhansl model Reviewed International coauthorship

Yang, W., Gao, G., Cui, Y., Chen, Z.

Engineering Fracture Mechanics   Vol. 309   page： 110407   2024

Topology optimization with boundary reconstruction of anisotropic structures under a time-harmonic vibration Invited Reviewed Open Access

Shuzhan ZHOU, Yi CUI, Toru TAKAHASHI, Toshiro MATSUMOTO

Transactions of the Japan Society for Computational Methods in Engineering   Vol. 24   page： 127 - 136   2024

Estimating the location and shape of a scatterer by using its representative point for three-dimensional acoustic inverse problems Invited Reviewed Open Access

Yuki SUGIHARA, Toru TAKAHASHI, Yi CUI, Toshiro MATSUMOTO

Transactions of the Japan Society for Computational Methods in Engineering   Vol. 24   page： 89 - 96   2024

Investigating size dependence in nanovoid-embedded high-entropy-alloy films under biaxial tension Reviewed

Cui Yi, Chen Zengtao, Gu Shaojie, Yang Wenzhi, Ju Yang

Archive of Applied Mechanics   Vol. 93 ( 1 ) page： 335 - 353   2023

Transient heat transfer analysis of a cracked strip irradiated by ultrafast Gaussian laser beam using dual-phase-lag theory Reviewed International coauthorship

International Journal of Heat and Mass Transfer   Vol. 203   page： 123771   2023

Realizing strength–ductility synergy in a lean duplex stainless steel through enhanced TRIP effect via pulsed electric current treatment Reviewed International coauthorship

Gu, S.,Liu, C.,Kimura, Y.,Yoon, S.,Cui, Y.,Yan, X.,Ju, Y.,Toku, Y.

Materials Science and Engineering: A   Vol. 883   page： 145534   2023

Thermal stress-assisted formation of submicron pillars from a thin film of CoCrCuFeNi high entropy alloy: Experiments and simulations Reviewed International coauthorship Open Access

Yoon S, Kimura Y, Gu S, Toku Y, Ju Y, Cui Y

RSC Advances   Vol. 13 ( 41 ) page： 28513 - 28526   2023

Thermal and fracture analysis of collinear interface cracks in graded coating systems under ramp-type heating Reviewed International coauthorship

Yang W, Zhang X, Cui Y, Chen Z.

International Journal of Heat and Mass Transfer   Vol. 216   page： 124581   2023

A mode reduction method used for calculating the frequency response and topological derivatives Reviewed

Hao Ren, Yi Cui, Toru Takahashi, Toshiro Matsumoto

Transactions of the Japan Society for Computational Methods in Engineering   Vol. 23   page： 13 - 19   2023

Rapid anisotropy recovery in deformed FCC metals by high-density pulsed electric current treatment Reviewed

Gu Shaojie, Cui Yi, Yoon Sungmin, Wang Zizheng, Kimura Yasuhiro, Toku Yuhki, Ju Yang

Vacuum   Vol. 197   page： 110855   2022

Improvement of low-cycle fatigue life of austenitic stainless steel by multiple high-density pulsed electric currents Reviewed Open Access

Yoon S., Cui Y., Kimura Y., Gu S., Toku Y., Ju Y.

International Journal of Fatigue   Vol. 156   page： 106639   2022

A time-saving FEM-based approach for structural topology optimization with exact boundary representation Reviewed Open Access

CUI Yi, TAKAHASHI Toru, MATSUMOTO Toshiro

Mechanical Engineering Journal   Vol. 9 ( 6 ) page： 22-00281   2022

The influence of volume constraint method on achieving the exact boundary representation in FEM-based topology optimization: Case studies Reviewed

Yi CUI, Toru TAKAHASHI and Toshiro MATSUMOTO

Transactions of the Japan Society for Computational Methods in Engineering   Vol. 22   page： 189 - 198   2022

Nanotwinning and tensile behavior in cold-welded high-entropy-alloy nanowires Reviewed

Cui Yi, Toku Yuhki, Ju Yang

Nanotechnology   Vol. 32 ( 31 ) page： 315716   2021

The deformation mechanism in cold-welded gold nanowires due to dislocation emission Reviewed

Cui Yi, Toku Yuhki, Kimura Yasuhiro, Ju Yang

Computational Materials Science   Vol. 188   page： 110214   2021

Relief of strain hardening in deformed Inconel 718 by high-density pulsed electric current Reviewed

Gu Shaojie, Cui Yi, Kimura Yasuhiro, Toku Yuhki, Ju Yang

Journal of Materials Science   Vol. 56 ( 29 ) page： 16686 - 16696   2021

Evaluation of electric current-induced improvement of fracture characteristics in SUS316 Invited Reviewed Open Access

Yoon, S.,Kimura, Y.,Cui, Y.,Toku, Y.,Ju, Y.

Materials Transactions   Vol. 62 ( 6 ) page： 748 - 755   2021

True origin of the size effect in cold-welded metallic nanocrystals Reviewed

Cui Yi, Toku Yuhki, Kimura Yasuhiro, Ju Yang

International Journal of Mechanical Sciences   Vol. 187   page： 106102   2020

Fracture of void-embedded high-entropy-alloy films: A comprehensive atomistic study Reviewed

Cui Yi, Chen Zengtao, Ju Yang

Materialia   Vol. 12   page： 100790   2020

Numerical modelling of interfacial transition zone influence on elastic modulus of concrete Reviewed

Sheng Peiyao, Chen Zengtao, Cui Yi, Zhang Jizhi, Zhang Huan, Ji Zhong

Magazine of Concrete Research   Vol. 72 ( 16 ) page： 811 - 819   2020

High-strain-rate void growth in high entropy alloys: Suppressed dislocation emission = suppressed void growth

Cui Yi, Toku Yuhki, Kimura Yasuhiro, Ju Yang

Scripta Materialia   Vol. 185   page： 12 - 18   2020

Atomistic treatment of periodic gold nanowire array nanofasteners under shear loading Reviewed International coauthorship

Cui Yi, Ju Yang, Meguid Shaker A.

Nanotechnology   Vol. 31 ( 10 ) page： 105704   2020

Fundamental insights into the mass transfer via full dislocation loops due to alternative surface cuts Reviewed International coauthorship Open Access

Cui Yi, Chen Zengtao, Ju Yang

International Journal of Solids and Structures   Vol. 161   page： 42 - 54   2019

Mass transfer and morphology change via dislocation emission in a macroporous FCC metal Reviewed

Cui Yi, Chen Zengtao, Ju Yang

Materials Letters   Vol. 247   page： 67 - 70   2019

New mechanisms of helical dislocation formation via the pinch-off process near a nano-inhomogeneity Reviewed International coauthorship

Computational Materials Science   Vol. 155   page： 400 - 409   2018

Key mechanical problems in dispersion nuclear fuels during their burning evolution process Reviewed

Ding, S., Gong, X., Zhao, Y., Cui, Y., Huo, Y., Wei, H.

Chinese Quarterly of Mechanics   Vol. 39 ( 1 ) page： 1 - 21   2018

Simulation of mechanical performance of nanoporous FCC copper under compression with pores mimicking several crystalline arrays Reviewed

Cui Y., Chen Z.

Journal of Applied Physics   Vol. 122 ( 7 ) page： 075102   2017

Void initiation from interfacial debonding of spherical silicon particles inside a silicon-copper nanocomposite: A molecular dynamics study Reviewed

Cui Y., Chen Z.

Modelling and Simulation in Materials Science and Engineering   Vol. 25 ( 2 ) page： 025007   2017

Chen, Z Reviewed

Cui Y., Chen Z.

Void growth via atomistic simulation: Will the formation of shear loops still grow a void under different thermo-mechanical constraints? Philosophical Magazine   Vol. 97 ( 33 ) page： 3142 - 3171   2017

Thermal wave: From nonlocal continuum to molecular dynamics Reviewed

AH Akbarzadeh, Y Cui, ZT Chen

RSC Advances   Vol. 7 ( 22 ) page： 13623 - 13636   2017

Simulation of the fission-induced swelling and creep in the CERCER fuel pellets Reviewed

Zhao Y., Gong X., Cui Y., Ding S.

Materials & Design   Vol. 89   page： 183 - 195   2016

Material transport via the emission of shear loops during void growth: A molecular dynamics study Reviewed

Journal of Applied Physics   Vol. 119 ( 22 ) page： 225102   2016

Modifications and applications of the mechanistic gaseous swelling model for UMo fuel Reviewed

Journal of Nuclear Materials   Vol. 457   page： 157 - 164   2015

Molecular dynamics modeling on the role of initial void geometry in a thin aluminum film under uniaxial tension Reviewed

Cui Y., Chen Z.

Modelling and Simulation in Materials Science and Engineering   Vol. 23 ( 8 ) page： 085011   2015

Molecular dynamics simulation of the influence of elliptical void interaction on the tensile behavior of aluminum Reviewed

Computational Materials Science   Vol. 108 ( Part A ) page： 103 - 113   2015

An efficient numerical method for intergranular fission gas evolution under transient with piecewise boundary resolution Reviewed

Yi Cui, Shurong Ding, Yongzhong Huo, Canglong Wang, Lei Yang

Journal of Nuclear Materials   Vol. 443 ( 1–3 ) page： 570 - 578   2013

An analytical solution for simulation of the fission gas behaviors with time-dependent piece-wise boundary resolution Reviewed

Cui, Y.,Huo, Y.,Ding, S.,Zhang, L.,Li, Y.

Journal of Nuclear Materials   Vol. 424 ( 1–3 ) page： 109 - 115   2012

Fission gas model for UO₂ fuels considering bubble coalescence and grain boundary diffusion Reviewed

22. Yi Cui, Shurong Ding, Zhao Yunmei, Yongzhong Huo, Canglong Wang, Luliuting Yang

Nuclear Power Engineering   Vol. 33 ( S2 ) page： 9 - 12   2012

Three-dimensional FE analysis of the thermal-mechanical behaviors in the nuclear fuel rods Reviewed

Yijie Jiang, Yi Cui, Yongzhong Huo, Shurong Ding

Annals of Nuclear Energy   Vol. 38 ( 11 ) page： 2581 - 2593   2011

A method for 3D simulation of internal gas effects on thermal-mechanical behaviors in nuclear fuel elements Reviewed

Jiang Yijie, Cui Yi, Huo Yongzhong, Ding Shurong

Nuclear Science and Techniques   Vol. 22 ( 3 ) page： 185 - 192   2011

Simulation of the coupling behaviors of particle and matrix irradiation swelling and cladding irradiation growth of plate-type dispersion nuclear fuel elements Reviewed

QimingWangYiCuiYongzhongHuoShurongDing

Mechanics of Materials   Vol. 43 ( 4 ) page： 222 - 241   2011

Simulation of irradiation hardening of Zircaloy within plate-type dispersion nuclear fuel elements Reviewed

Yijie Jiang, Qiming Wang, Yi Cui, Yongzhong Huo, Shurong Ding

Journal of Nuclear Materials   Vol. 413 ( 2 ) page： 76 - 89   2011

Prediction of the micro-thermo-mechanical behaviors in dispersion nuclear fuel plates with heterogeneous particle distributions Reviewed

Yijie Jiang, Qiming Wang, Yi Cui, Yongzhong Huo, Shurong Ding, Lin Zhang, Yuanming Li

Journal of Nuclear Materials   Vol. 418 ( 1–3 ) page： 69 - 79   2011

From Eshelby’s Solution to Topological Derivatives in General Elasticity Theory

Yi Cui

CSME-CFDSC-CSR 2025     2025

Structural Topology Optimization of 2D and 3D Periodic Structures for Lightweight Engineering Design

Yi Cui

8th International Conference on Aeronautical, Aerospace and Mechanical Engineering (AAME 2025)     2025

Analytical sensitivity analysis for topology optimization of hyperelastic materials

Yi Cui,Zhongyuan Yu,Yuki Ashikari,Toru Takahashi,Toshiro Matsumoto

International Conference on Mechanics and Materials in Design 2024     2024

Reaction-diffusion equation-based topology optimization of lightweight elastoplastic structures by exact volume constraint

Yi Cui,Toru Takahashi,Toshiro Matsumoto

XVII International Conference on Computational Plasticity (COMPLAS 2023)     2023

Deriving the topological derivative in topology optimization problems under general nonlinear boundary conditions

Shinsei Sato,Yi Cui,Toru Takahashi,Toshiro Matsumoto

The 7th Asia-Pacific International Conference on Computational Methods in Engineering (ICOME2023)     2023

An exact treatment of volume constraint on achieving the exact boundary representation of topology optimization

Toshiro Matsumoto,Yi Cui

The 7th Asia-Pacific International Conference on Computational Methods in Engineering (ICOME2023)     2023.11

Applications of the model order reduction using variational autoencoder to PDE-constrained topology optimisations

Hitoki Ishikawa,Toru Takahashi,Yi Cui,Toshiro Matsumoto

15th World Congress on Computational Mechanics     2022

Structural topology optimization via level set method by considering small strain plasticity to impose stress constraint

Yi Cui,Toru Takahashi,Toshiro Matsumoto

Asian Congress of Structural and Multidisciplinary Optimization 2022     2022

Boundary element method to investigate the interaction between geometrically necessary dislocations and voids by the nonsingular dislocation theory

Yi Cui,Toru Takahashi,Toshiro Matsumoto

15th World Congress on Computational Mechanics / 8th Asian Pacific Congress on Computational Mechanics (WCCM–APCOM)     2022

Dislocation-induced mass transfer mechanism in nanostructured metallic materials

Yi Cui,Yang Ju

10th IFAMST     2019

Mechanical bonding between metallic nanowires and films: an atomistic simulation

Yi Cui,Yang Ju

The 5th International Conference on Nanomechanics and Nanocomposites     2018

Nanovoid growth under different mechanical and thermal constraints

Yi Cui,Zengtao Chen

The 29th Canadian Materials Science Conference     2017

Shear feasibility: new theoretical understanding regarding the growth of nanovoid

Yi Cui,Zengtao Chen

The 26th Canadian Congress on Applied Mechanics     2017

Molecular dynamics study of the interfacial debonding due to cylindrical nano-inclusion

Yi Cui,Zengtao Chen

The 24th International Congress of Theoretical and Applied Mechanics     2016

Molecular dynamics insights into the coalescence of closely-packed voids

Yi Cui,Zengtao Chen

The 24th International Congress on Theoretical and Applied Mechanics     2016

Experimental investigation and micromechanical modeling of hot-rolled steels considering the effects of micro-voids

Ke Niu,Yi Cui,Zengtao Chen

The 2015 AUTO21 Scientific Conference     2015

Effects of fuel particle sizes on the thermo-mechanical behaviors in the rod-type dispersion nuclear fuel elements

Yi Cui,Xinchen Ni,Shurong Ding,Yongzhong Huo

The 10th International Congress on Thermal Stress     2013

Irradiation-induced thermo-mechanical coupling in dispersion nuclear fuel elements

Shurong Ding,Y. F. Wan,Yi Cui,Yongzhong Huo

Advances in Heterogeneous Material Mechanics     2011

FreeFEMに基づく2次元弾塑性解析の並列応力更新フレームワーク

SOO Wing Seng,竹内一郎,Cui Yi

日本機械学会第39回計算力学講演会 (CMD2026)     2026.9

マルチフィデリティベイズ最適化によるボロノイ分割を用いた構造の最適化

上田修史,山本康太,杉浦秀平,竹野思温,竹内一郎,Cui Yi

日本機械学会第39回計算力学講演会 (CMD2026)     2026.9

ボロノイ分割に基づくラティス構造設計のための制約付き多目的ベイズ最適化

山本康太,上田修史,杉浦秀平,竹野思温,竹内一郎,Cui Yi

日本機械学会第39回計算力学講演会 (CMD2026)     2026.9

PINN計算による外場駆動ナノ構造形成メカニズムの解明―電子風力駆動せん断帯形成と応力場誘起ナノ介在物界面剥離パターンの統合数値解析―

Cui Yi

第18回JHPCN（学際大規模情報基盤共同利用・共同研究拠点）シンポジウム     2026

原子レベルシミュレーションを用いたPINNによるシリコンナノ包有物周囲の弾性場の可視化

CUI Yi,TAKEUCHI Ichiro

電子情報通信学会技術研究報告     2025

超弾性材料のトポロジー最適化における解析的感度解析

Cui Yi,高橋徹,松本敏郎

日本機械学会第38回計算力学講演会 (CMD2025)     2025.9

熱輻射境界条件の幾何的制約を伴うトポロジー最適化の性能評価

佐藤伸成,高橋徹,崔羿,松本敏郎

日本機械学会第38回計算力学講演会 (CMD2025)     2025.9

エシェルビー解から異方性弾性理論におけるトポロジー導関数へ

Cui Yi,高橋徹,松本敏郎

日本機械学会 M&M・CMD 若手シンポジウム 2025     2025.8

3次元の異方性材料に対するトポロジー導関数の導出

小酒井裕太,Cui Yi,高橋徹,松本敏郎

日本機械学会東海支部第74期総会・講演会 TOKAI ENGINEERING COMPLEX 2025 (TEC25)     2025.3

敵対的生成ネットワークによる形状のデザイン性を考慮したトポロジー最適化

鈴木直樹,高橋徹,Cui Yi,松本敏郎

日本機械学会東海支部第74期総会・講演会 TOKAI ENGINEERING COMPLEX 2025 (TEC25)     2025.3

幾何的な制約を含む熱ふく射境界条件を考慮したトポロジー最適化

佐藤伸成,Yi Cui,高橋徹,松本敏郎

日本機械学会第37回計算力学講演会 (CMD2024)     2024.10

マルチマテリアルトポロジー最適化のための厳密な体積制約法の確立

辻里花,Cui Yi,高橋徹,松本敏郎

日本機械学会第37回計算力学講演会 (CMD2024)     2024.10

実境界下での3D周期構造のトポロジー最適化

Cui Yi,高橋徹,松本敏郎

日本機械学会第37回計算力学講演会 (CMD2024)     2024.10

3次元弾塑性問題のトポロジー最適化

堤翔傑,Cui Yi,松本敏郎,高橋徹

日本機械学会東海支部第73期総会・講演会 TOKAI ENGINEERING COMPLEX 2024 (TEC24)     2024.3

衝撃変形を受けるトポロジー最適化におけるトポロジー導関数

黄嘯,崔羿,高橋徹,松本敏郎

日本機械学会東海支部第73期総会・講演会 TOKAI ENGINEERING COMPLEX 2024 (TEC24)     2024.3

変分オートエンコーダを用いた3次元形状最適化

中田海登,高橋徹,Cui Yi,松本敏郎

日本機械学会東海支部第73期総会・講演会 TOKAI ENGINEERING COMPLEX 2024 (TEC24)     2024.3

Tensor Processing Unitを用いた反復型境界要素法の高速化

水元和崇,松本敏郎,高橋徹,Cui Yi

日本機械学会東海支部第73期総会・講演会 TOKAI ENGINEERING COMPLEX 2024 (TEC24)     2024.3

敵対的生成ネットワークによるオリジナルのデザインを反映したトポロジー最適化

鈴木直樹,高橋徹,Cui Yi,松本敏郎

日本機械学会東海学生会 TOKAI ENGINEERING COMPLEX 2024 (TEC24)     2024.3

非線形境界条件を有する場の最適化問題におけるトポロジー導関数

松本敏郎,佐藤伸成,高橋徹,Yi Cui

日本機械学会M&M2023材料力学カンファレンス     2023.9

3次元高速時間領域境界要素法を用いた音響散乱体の位置および形状の推定に関する逆解析

杉原祐貴,高橋徹,Cui Yi,松本敏郎

第28回計算工学講演会     2023.5

Physics-Informed Neural Networksに基づく3次元弾性体の固有振動数の推定

宮田貴広,高橋徹,松本敏郎,Cui Yi

日本機械学会第36回計算力学講演会 (CMD2023)     2023.10

変分オートエンコーダによる意匠性を考慮した3次元形状最適化

中田海登,Cui Yi,高橋徹,松本敏郎

日本機械学会第36回計算力学講演会 (CMD2023)     2023.10

超弾性材料の大変形を伴うトポロジー最適化における感度分析の考察

葦刈佑季,Cui Yi,高橋徹,松本敏郎

日本機械学会第36回計算力学講演会 (CMD2023)     2023.10

異方性材料の実境界トポロジー最適化の実現

Cui Yi,高橋徹,松本敏郎

日本機械学会第36回計算力学講演会 (CMD2023)     2023.10

厳密な体積制約法に基づく弾塑性問題のトポロジー最適化

堤翔傑,Cui Yi,松本敏郎,高橋徹

日本機械学会第36回計算力学講演会 (CMD2023)     2023.10

境界要素法による音響散乱体の位置および形状の逐次的推定手法の開発

杉原祐貴,高橋徹,Cui Yi,松本敏郎

日本機械学会第36回計算力学講演会 (CMD2023)     2023.10

黒体に対する熱輻射の相互作用を考慮した境界条件を有するトポロジー最適化

佐藤伸成,Cui Yi,高橋徹,松本敏郎

日本機械学会第36回計算力学講演会 (CMD2023)     2023.10

レベルセット法による異方性材料のトポロジー最適化

栗田柚希,松本敏郎,高橋徹,Cui Yi

日本機械学会第36回計算力学講演会 (CMD2023)     2023.10

A mode reduction method for topology optimization of elastic structural frequency response based on topological derivative

Hao Ren,Yi Cui,Toru Takahashi,Toshiro Matsumoto

日本機械学会第33回設計工学・システム部門講演会     2023.9

構造最適化における厳密体積制約法と実境界手法の一般化

Cui Yi,高橋徹,松本敏郎

第33回設計工学・システム部門講演会     2023.9

Physics-Informed Neural Networkによる2次元Helmholtz方程式の固有値推定

石田大樹,高橋徹,Yi Cui,松本敏郎

日本機械学会第35回計算力学講演会 (CMD2022)     2022.11

線形および非線形連続体力学のトポロジー導関数の導出について

崔羿,高橋徹,松本敏郎

日本機械学会第35回計算力学講演会 (CMD2022)     2022.11

厳密な体積制約と境界表現による熱伝達問題における有限要素法を用いたトポロジー最適化

崔羿,高橋徹,松本敏郎

日本機械学会第14回最適化シンポジウム2022 (OPTIS2022)     2022.11

異方性材料の任意の目的関数のトポロジー導関数について

崔羿,高橋徹,松本敏郎

日本機械学会第14回最適化シンポジウム2022 (OPTIS2022)     2022.11

異方性弾性材料の構造最適化におけるトポロジー導関数と密度導関数の比較

崔羿,高橋徹,松本敏郎

日本機械学会第14回最適化シンポジウム2022 (OPTIS2022)     2022.11

熱伝導問題に対するレベルセット法に基づくトポロジー最適化における熱輻射境界条件の導入

佐藤伸成,Yi Cui,高橋徹,松本敏郎

日本機械学会第14回最適化シンポジウム2022 (OPTIS2022)     2022.11

ヒロック成長による超小型CoCrCuFeN高エントロピー合金柱の製造

Yoon Sungmin,Cui Yi,Kimura Yasuhiro,Toku Yuhki,Gu Shaojie,Ju Yang

日本機械学会M&M2022材料力学カンファレンス     2022.9

金属材料の転位誘起変形に対する理論的洞察

崔 羿 (Yi Cui),高橋 徹,松本 敏郎

日本機械学会M&M2022材料力学カンファレンス     2022.9

湾曲した金属ナノワイヤーの冷間溶接性能

Yi Cui,Yuhki Toku,Yasuhiro Kimura,Yang Ju

日本機械学会M&M2021材料力学カンファレンス     2021.9

高密度パルス電流による予ひずみを有するインコネル718の加工硬化の緩和

Gu Shaojie,Cui Yi,Kimura Yasuhiro,Toku Yuhki,Ju Yang

日本機械学会M&M2021材料力学カンファレンス     2021.9

マルチスケールシミュレーションに基づく応力誘導下高エントロピーナノワイヤーの成長メカニズムの解明

2022 - 2023

日東学術振興財団研究助成 

[G30]Vehicle Design

2025

[G30]自動車工学概論

2025

機械・航空宇宙工学実験１（固体の加熱および冷却と温度分布測定）

2024

「機械・航空宇宙工学実験１（固体の加熱および冷却と温度分布測定）」

2024

Freefem++ workshop

2023

「機械・航空宇宙工学実験２（機械学習を用いた構造最適化の第I部」

2023

数学1及び演習（演習担当）

2021

日本機械学会 第39回計算力学講演会（CMD2026）「境界要素法の高度化と最新応用」OSと「周期構造とシミュレーション技術」【応用物理学会合同OS】共同オーガナイザ

Role(s)：Planning, management, etc.

2026.9

Publicity Chair, the 15th International Conference on Engineering and Innovative Materials (ICEIM 2026) International contribution

Role(s)：Planning, management, etc.

2026.2 - 2026.8