Presentations -
-
Optimization of fiber orientation and location for 3D-printing FRP International conference
Takahito Moribe,Hiroya Hoshiba,Junji Kato
COMPSAFE2020 2020.12.10
-
Multi-material topology optimization considering strength of materials and interfaces International conference
Daiki Watanabe,Hiroya Hoshiba,Junji Kato
COMPSAFE2020 2020.12.10
-
Topology optimization to improve structural strengt for additive manufacturing International conference
Junji Kato
ACSMO2020(Asian Congress of Structural and Multidisciplinary Optimization 2020) 2020.11.23 ASSMO
-
Multiscale topology optimization for heat conduction and transfer in porous media International conference
Sululthanasorn Naruethep,Hiroya Hoshiba,Mao Kurumatani,Junji Kato and Kenjiro Terada
ACSMO2020(Asian Congress of Structural and Multidisciplinary Optimization 2020) 2020.11.25 ASSMO
-
積層造形を念頭においたトポロジー最適設計
加藤準治
2020年度 日本機械学会年次大会
-
三相材料モデルによるラティス構造のトポロジー最適化設計
田邉 雄太(東京理科大学),牛島 邦晴(東京理科大学),加藤 準治
第25回計算工学講演会
-
多孔質材料の熱伝導及び熱伝達に関するミクロ構造のトポロジー最適化
スクルタナソーン ナルテープ(名古屋大学),干場 大也(名古屋大学),車谷 麻緒(茨城大学),加藤 準治,寺田 賢二郎(東北大学)
第25回計算工学講演会
-
建設3Dプリンターを念頭においたトポロジー最適設計法の開発
松井 聖圭(名古屋大学工学部),鎌田 浩基(東北大学),干場 大也(名古屋大学工学部工学研究科),加藤 準治
第25回計算工学講演会
-
エネルギー散逸制御を目的とした粘弾性材料のトポロジー最適化
干場 大也(名古屋大学),高橋 寛成(同大)、加藤 準治
第25回計算工学講演会
-
3D-printing FRPの機械的性能評価および数値シミュレーション
森部 天仁(名古屋大学大学院工学研究科土木工学専攻),干場 大也(同大),加藤 準治
第25回計算工学講演会
-
材料強度を考慮した熱-構造連成マルチマテリアルトポロジー最適化
渡邉 大貴(名古屋大学)、干場 大也(名古屋大学)、加藤 準治
第25回計算工学講演会
-
コンクリート構造の損傷解析に基づく感度解析アルゴリズムの提案
水鳥智幸,干場大也,加藤準治
第23回応用力学シンポジウム
-
トポロジー最適化による粘弾性複合構造の動的コンプライアンス制御
高橋寛成,干場大也,加藤準治
第23回応用力学シンポジウム
-
3D-printing FRPの機械的性能評価および数値解析モデルの検討
森部天仁,干場大也,加藤準治
第23回応用力学シンポジウム
-
コンクリート補強材を想定した周期的なCFRP構造の最適設計
松井聖圭,干場大也,加藤準治
第23回応用力学シンポジウム
-
Finite thermo-elastic decoupled two-scale analysis International conference
R. Fleischhauer,J.Kato,K.Terada,M.Kaliske,
The Asian Pacific Congress on Computational Mechanics (APCOM2019)
-
Stress constraints for weight reduction by multi-material topology optimization under thermo-elastic behavior International conference
D.Watanabe,J.Kato,T.Kyoya,
The Asian Pacific Congress on Computational Mechanics (APCOM2019)
-
Optimal Design of Lattice Structure Considering Constraints through Additive Manufacturing Process International conference
Y.Koike,K.Ushijima and J.Kato
Proc. of II International Conference on Simulation for Additive Manufacturing (Sim-AM2019)
-
Multi-material optimization for future products by additive manufacturing to minimize dynamic structural response International conference
T.Endo,H.Hoshiba,J.Kato
Proc. of II International Conference on Simulation for Additive Manufacturing (Sim-AM2019)
-
Simplified approach of topology optimization for improving structural strength International conference
H.Kamada,J.Kato
Proc. of II International Conference on Simulation for Additive Manufacturing (Sim-AM2019)