Presentations -
-
Multi-scale topology optimization applying FFT-based homogenization approach
Matsui, M., Hoshiba, H., Nishiguchi, K., Kato, J. and Ogura, H.
14th World Congress of Structural and Multidisciplinary Optimization 2021.6.14 International Society for Structural and Multidisciplinary Optimization
-
Additive manufacturing topology optimization for buckling with stiffness constraint International conference
Kato, J., Mizutori, T., Hoshiba, H., Uozumi, H. and Kikawa, K.
14th World Congress of Structural and Multidisciplinary Optimization 2021.6.16 International Society for Structural and Multidisciplinary Optimization
-
Fundamental study of topology optimization for brittle-ductile com-posites International conference
Hoshiba, H., and Kato, J.
14th World Congress of Structural and Multidisciplinary Optimization 2021.6.14 International Society for Structural and Multidisciplinary Optimization
-
Topology optimization for transient heat transfer considering size effect of microstructure in porous material International conference
Sululthanasorn, N., Hoshiba, H., Kurumatani, M., Kato, J. and Terada, K.
14th World Congress of Structural and Multidisciplinary Optimization 2021.6.15 International Society for Structural and Multidisciplinary Optimization
-
トポロジー最適化による複合ゴム構造の動的粘弾性制御
干場大也，西口浩司，加藤準治
第26回計算工学講演会 2021.5.27 日本計算工学会
-
階層型直交メッシュを用いたオイラー型構造-流体統一解法による骨折予防床の大変形解析
勝又稜平，西口浩司，干場大也，加藤準治，平山洋介（株式会社 Magic Shields)
第26回計算工学講演会 2021.5.27 日本計算工学会
-
非定常熱境界条件を考慮したトポロジー最適化の基礎的検討
高荒圭佑，干場大也，西口浩司，加藤準治
第26回計算工学講演会 2021.5.27 日本計算工学会
-
FFT均質化アルゴリズムに基づくマルチスケールトポロジー最適化の基礎的検討
松井聖圭，干場大也，西口浩司，加藤準治，小倉大季（清水建設株式会社）
第26回計算工学講演会 2021.5.27 日本計算工学会
-
3D-printing FPRの構造および繊維配向の最適化
森部天仁，干場大也，加藤準治
第26回計算工学講演会 2021.5.27 日本計算工学会
-
接着部の静的破壊を考慮したマルチマテリアルトポロジー最適化
渡邉大貴，干場大也，西口浩司，加藤準治
第26回計算工学講演会 2021.5.27 日本計算工学会
-
Topology Optimization for Porous Structure Considering Unsteady-state Heat Conduction and Transfer International conference
Naruethep Sululthanasorn, Hiroya Hoshiba, Mao Kurumatani, Junji Kato and Kenjiro Terada
ACMFMS2020+1 2021.3
-
Optimization and additive manufacturing technology for smart materials and structures International conference
Kuniharu Ushijima and junji Kato
ACMFMS2020+1 2021.3
-
Multi-material Topology Optimization Considering Static Fracture of The Interface International conference
Daiki Watanabe,Hiroya Hoshiba and Junji Kato
ACMFMS2020+1 2021.3
-
Topology optimization Controlling Dynamic Energy Loss of Rubber Structures International conference
Hiroya Hoshiba,Daichi Azumi and Junji Kato
ACMFMS2020+1 2021.3
-
MULTI-SCALE TOPOLOGY OPTIMIZATION FOR TRANSIENT HEAT TRANSPORTATION IN POROUS MATERIAL International conference
Sululthanasorn Naruethep,Hiroya Hoshiba,Mao Kurumatani,Junji Kato and Kenjiro Terada
WCCM2020(World Congress in Computational Mechanics and ECCOMAS Congres) 2021.1
-
CONDITIONAL EXPLICIT FORMULATION OF SENSITIVITY ANALYSIS FOR NONLINEER TOPOLOGY OPTIMIZATION International conference
Hiroya,Hoshiba,Junji Kato
WCCM2020(World Congress in Computational Mechanics and ECCOMAS Congres) 2021.1
-
MULTI-MATERIAL TOPOLOGY OPTIMIZATION WITH STRESS CONSTRAINTS UNDER A HIGH TEMPERETURE ENVIROMENT International conference
Daiki Watanabe,Hiroya Hoshiba and Junji Kato
WCCM2020(World Congress in Computational Mechanics and ECCOMAS Congres) 2021.1
-
TOPOLOGY OPTIMIZATION BASED ON A HOMOGENIZATION APPROACH FOR DISTRIBUTION OF SEAMLESS MICROSTRUCTURES International conference
Masayoshi Matsui,Hiroki Kamada,Hiroya Hoshiba and Junji Kato
WCCM2020(World Congress in Computational Mechanics and ECCOMAS Congres) 2021.1
-
A study on topology optimization of microstructure for transient thermal energy transport in porous media
Naruethep Sukulthanasorn,Hiroya Hoshiba,Mao Kurumatani,Junji Kato,Kenjiro Terada
COMPSAFE2020 2020.12.10
-
Topology optimization considering nonlinear behavior of brittle damage material model International conference
Hiroya Hoshiba,Junji Kato
COMPSAFE2020 2020.12.10