住友金属工業㈱   総合技術研究所   主任研究員

1990.4 - 2003.3

NEDO   新産業創出新技術先導研究プログラム（新新２）評価委員  

2021.1 - 2021.3   

日本金属学会   理事・組織写真賞評価委員長  

2019.4 - 2020.3   

日本鉄鋼協会   理事・会報委員会委員長  

2018.4 - 2022.6   

日本熱処理技術協会   理事・広報委員会副委員長  

2018.4 - 2021.6   

日本MRS   理事  

2015.4 - 2019.3   

日本鉄鋼協会西山記念賞

2008.9   日本鉄鋼協会  

日本鉄鋼協会澤村論文賞

2006.3   日本鉄鋼協会  

日本鉄鋼協会山岡賞

2002.3   日本鉄鋼協会  

日本鉄鋼協会俵論文賞

1999.3   日本鉄鋼協会  

日本金属学会奨励賞

1998.3   日本金属学会  

日本鉄鋼協会俵論文賞

1994.3   日本鉄鋼協会  

Resolving the Long-Standing Discrepancy in Fe3Al Ordering Mobilities: A Synergistic Experimental and Phase-Field Study Reviewed

Yuheng Liu, Madoka Watanabe, Masayuki Okugawa, Takashi Hagiwara, Tsubasa Sato, Yusuke Seguchi, Yoshitaka Adachi, Yoritoshi Minamino, Yuichiro Koizumi

Acta Materialia   Vol. 273   2024.7

Evaluation of the Tensile Properties of Vanadium-Added Steels with Different Ferrite and Pearlite Hardness Ratios

Kawamura, M; Ogawa, T; Sun, F; Adachi, Y

JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE   Vol. 33 ( 13 ) page： 6816 - 6824   2024.7

Improvement in the Strength-Ductility Balance of Tempered Martensite Steel by Controlling Cementite Particle Size Distribution

Hayakawa, K; Ogawa, T; He, L; Sun, F; Adachi, Y

JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE   Vol. 33 ( 13 ) page： 6675 - 6685   2024.7

Machine Learning-Aided Analysis of the Rolling and Recrystallization Textures of Pure Iron with Different Cold Reduction Ratios and Cold-Rolling Directions

Sumida, T; Sugiura, K; Ogawa, T; Chen, TT; Sun, F; Adachi, Y; Yamaguchi, A; Matsubara, Y

MATERIALS   Vol. 17 ( 14 )   2024.7

Analysis of the strength-ductility balance of dual-phase steel using a combination of generative adversarial networks and finite element method

Fukatsu, Y; Chen, TT; Ogawa, T; Sun, F; Adachi, Y; Tanaka, Y; Ishikawa, S

COMPUTATIONAL MATERIALS SCIENCE   Vol. 243   2024.7

Delineating the Ultra-Low Misorientation between the Dislocation Cellular Structures in Additively Manufactured 316L Stainless Steel Reviewed

Fei Sun, Yoshitaka Adachi, Kazuhisa Sato, Takuya Ishimoto, Takayoshi Nakano, Yuichiro Koizumi

Materials   Vol. 17 ( 8 ) page： 1851   2024.4

Image regression analysis for linking the microstructure and property of steel Reviewed

Kengo Sawai, Ta-Te Chen, Fei Sun, Toshio Ogawa, Yoshitaka Adachi

Results in Materials   Vol. 21   page： 100526   2024.1

Simulation of Abnormal Grain Growth Using the Cellular Automaton Method

Murata, K; Fukui, C; Sun, F; Chen, TT; Adachi, Y

MATERIALS   Vol. 17 ( 1 )   2024.1

2D/3D modeling and simulations of grain growth behavior in dual-phase steel using Monte Carlo and machine learning Reviewed

Fei Sun, Ayano Kita, Toshio Ogawa, Ta-Te Chen, Yoshitaka Adachi

Materials   Vol. 16   page： 7536 - 7552   2023.12

Simulation of Abnormal Grain Growth Using the Cellular Automaton Method Reviewed

Kenji Murata, Chihiro Fukui, Fei Sun, Ta-Te Chen, Yoshitaka Adachi

Materials     2023.12

Two- and Three-Dimensional Modeling and Simulations of Grain Growth Behavior in Dual-Phase Steel Using Monte Carlo and Machine Learning

Sun, F; Kita, A; Ogawa, T; Chen, TT; Adachi, Y

MATERIALS   Vol. 16 ( 24 )   2023.12

Evaluation of Austenite–Ferrite Phase Transformation in Carbon Steel Using Bayesian Optimized Cellular Automaton Simulation Reviewed

Sun, Fei, Mino, Yoshihisa, Ogawa, Toshio, Chen, Ta-Te, Natsume, Yukinobu, Adachi, Yoshitaka

Materials   Vol. 16 ( 21 ) page： 6922 - 6945   2023.11

Analysis of Crystal Orientation in Two-Way Cold-Rolled and Annealed Pure Iron

Suzuki, Y; Ogawa, T; Sun, F; Adachi, Y; Yamaguchi, A; Matsubara, Y

TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN   Vol. 109 ( 9 ) page： 50 - 58   2023.9

The initial grain size effect on the tensile-deformed microstructure in Type 310S austenitic stainless steel Reviewed

Kodai Takeshita,Toshio Ogawa,Fei Sun, Yoshitaka Adachi

Materials Letters   Vol. 341   page： 134285   2023.6

Modulated Structure Formation in Dislocation Cells in 316L Stainless Steel Fabricated by Laser Powder Bed Fusion Reviewed

Fei Sun,Toshio Ogawa, Yoshitaka Adachi, Yuichiro Koizumi

MATERIALS TRANSACTIONS     2023.6

Simulation-aided analysis of ferrite recrystallization behavior of pure iron with different dislocation characters

Iguchi, K; Ogawa, T; Sun, F; Adachi, Y

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T   Vol. 24   page： 6558 - 6566   2023.5

Big-Volume SliceGAN for Improving a Synthetic 3D Microstructure Image of Additive-Manufactured TYPE 316L Steel

Sugiura, K; Ogawa, T; Adachi, Y; Sun, F; Suzuki, A; Yamanaka, A; Nakada, N; Ishimoto, T; Nakano, T; Koizumi, Y

JOURNAL OF IMAGING   Vol. 9 ( 5 )   2023.4

Modulated Structure Formation in Dislocation Cells in 316L Stainless Steel Fabricated by Laser Powder Bed Fusion

Sun, F; Ogawa, T; Adachi, Y; Sato, K; Takagi, S; Miyamoto, G; Suzuki, A; Yamanaka, A; Nakada, N; Ishimoto, T; Nakano, T; Koizumi, Y

MATERIALS TRANSACTIONS   Vol. 64 ( 6 ) page： 1143 - 1149   2023

Dynamic analysis of microstructural evolution during tensile deformation of interstitial-free steel by in-situ electrical resistivity measurements Reviewed

Toshio Ogawa, Shogo Namizaki, Yoshitaka Adachi, Ken Takata

Materials letters   Vol. 328   page： 133113   2022.12

Development of gamma-ray-induced positron age-momentum correlation measurement

Taira, Y; Yamamoto, R; Sugita, K; Okano, Y; Hirade, T; Namizaki, S; Ogawa, T; Adachi, Y

REVIEW OF SCIENTIFIC INSTRUMENTS   Vol. 93 ( 11 )   2022.11

Computer-aided high-efficiency detection of fracture initiation sites in steel Reviewed

Miho Muramatsu, Zhi-Lei Wang, Toshio Ogawa, Yoshitaka Adachi, Tetsuya Namegawa, Kyohhei, Ishikawa, Hiroyuki Shirahata, Masaaki Fujioka

ISIJ international   Vol. 62 ( 9 )   2022.9

Hourly Work of 3D Microstructural Visualization of Dual Phase Steels by SliceGAN Reviewed

Keiya Sugiura, Toshio Ogawa, Yoshitaka Adachi

advanced theory and simulations   Vol. 5 ( 7 ) page： 1 - 5   2022.7

Generative Adversarial Networks-Based Synthetic Microstructures for Data-Driven Materials Design Reviewed

Ryuichi Narikawa, Yoshihito Fukatsu, Zhi-Lei Wang, Toshio Ogawa, Yoshitaka Adachi, Yuji Tanaka, Shin Ishikawa

advanced theory and simulations   Vol. 5 ( 5 ) page： 2100470   2022.5

Effect of Cold-Rolling Directions on Recrystallization Texture Evolution of Pure Iron Reviewed

Toshio Ogawa, Yutaro Suzuki, Yoshitaka Adachi Atsushi Yamaguchi, Yukihiro Matsubara

Materials   Vol. 15 ( 9 ) page： 3083 - 3093   2022.5

Characterization and Optimization of Pearlite Microstructure Using Persistent Homology and Bayesian Optimization Invited Reviewed

Kazuki KIYOMURA, Zhi-Lei WANG, Toshio OGAWA, Yoshitaka ADACHI

ISIJ international   Vol. 62 ( 2 ) page： 307 - 312   2022

Computer-aided High-efficiency Detection of Fracture Initiation Sites in Steel

Muramatsu, M; Wang, ZL; Ogawa, T; Adachi, Y; Namegawa, T; Ishikawa, K; Shirahata, H; Fujioka, M

ISIJ INTERNATIONAL   Vol. 62 ( 9 ) page： 1952 - 1956   2022

Scale-bridging analysis of heterogeneous deformation behavior in austenitic stainless steel Reviewed

Yamamoto, K; Ogawa, T; Wang, ZL; Adachi, Y

MATERIALS LETTERS   Vol. 299   2021.9

実験、モデリング、データサイエンスの連係による統合型材料デザインに向けて Invited Reviewed

足立吉隆、小川登志男、王志磊

素形材   Vol. 62 ( 3 ) page： 39 - 43   2021.8

Three-Dimensional Analysis of Ferrite Grains Recrystallized in Low-Carbon Steel during Annealing

Horiuchi, K; Ogawa, T; Wang, ZL; Adachi, Y

MATERIALS   Vol. 14 ( 15 )   2021.8

Quantitative Analysis of the Recovery Process in Pure Iron Using X-ray Diffraction Line Profile Analysis

Sugiyama, S; Ogawa, T; He, L; Wang, ZL; Adachi, Y

MATERIALS   Vol. 14 ( 4 )   2021.2

Strain Distribution Analysis of Two Perpendicular Planes in SUS310S Austenitic Stainless Steel Using Digital Image Correlation

Kai, YY; Ogawa, T; Wang, ZL; Adachi, Y

ISIJ INTERNATIONAL   Vol. 61 ( 1 ) page： 481 - 486   2021

Stress-strain partitioning behavior and mechanical properties of dual-phase steel using finite element analysis

Maeda Ryotaro, Wang Zhi-Lei, Ogawa Toshio, Adachi Yoshitaka

MATERIALS TODAY COMMUNICATIONS   Vol. 25   2020.12

材料工学における機械学習による順解析と逆解析 Invited Reviewed

足立吉隆,Zhi-Lei Wang,小川登志男

ふぇらむ   Vol. 25 ( 11 ) page： 695 - 709   2020.11

定量組織学2 （数学的に重要な組織特徴量の抽出と類似性の評価） Invited Reviewed

足立吉隆,Zhi-Lei Wang,小川登志男

ふぇらむ   Vol. 25 ( 10 ) page： 629 - 636   2020.10

Analysis of Three-dimensional Structure and Formation Mechanism of Degenerate Pearlite in Eutectoid Steel

Nakamura Yuta, Wang Zhi-Lei, Ogawa Toshio, Adachi Yoshitaka

TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN   Vol. 106 ( 10 ) page： 751 - 756   2020.10

画像認識と定量組織学１（材料工学的に重要な組織特徴量の抽出） Invited Reviewed

足立吉隆,Zhi-Lei Wang,小川登志男

ふぇらむ   Vol. 25 ( 9 ) page： 569 - 578   2020.9

Persistent-Homology-Based Microstructural Optimization of Materials Using t-Distributed Stochastic Neighbor Embedding

Wang Zhi-Lei, Ogawa Toshio, Adachi Yoshitaka

ADVANCED THEORY AND SIMULATIONS   Vol. 3 ( 7 )   2020.7

Machine-Learning-Based Image Similarity Analysis for Use in Materials Characterization

Wang Zhi-Lei, Ogawa Toshio, Adachi Yoshitaka

ADVANCED THEORY AND SIMULATIONS   Vol. 3 ( 3 )   2020.3

Property Predictions for Dual-Phase Steels Using Persistent Homology and Machine Learning

Wang Zhi-Lei, Ogawa Toshio, Adachi Yoshitaka

ADVANCED THEORY AND SIMULATIONS   Vol. 3 ( 3 )   2020.3

A Machine Learning Tool for Materials Informatics

Wang Zhi-Lei, Ogawa Toshio, Adachi Yoshitaka

ADVANCED THEORY AND SIMULATIONS   Vol. 3 ( 1 )   2020.1

Processing Optimization and Property Predictions of Hot-Extruded Bi-Te-Se Thermoelectric Materials via Machine Learning

Wang Zhi-Lei, Adachi Yoshitaka, Chen Zhong-Chun

ADVANCED THEORY AND SIMULATIONS   Vol. 3 ( 1 )   2020.1

Development of High Accuracy Segmentation Model for Microstructure of Steel by Deep Learning

Ajioka Fumito, Wang Zhi-Lei, Ogawa Toshio, Adachi Yoshitaka

ISIJ INTERNATIONAL   Vol. 60 ( 5 ) page： 954 - 959   2020

Development of Data-Driven System in Materials Integration

Inoue Junya, Okada Masato, Nagao Hiromichi, Yokota Hideo, Adachi Yoshitaka

MATERIALS TRANSACTIONS   Vol. 61 ( 11 ) page： 2058 - 2066   2020

Influence of Algorithm Parameters of Bayesian Optimization, Genetic Algorithm, and Particle Swarm Optimization on Their Optimization Performance

Wang Zhi-Lei, Ogawa Toshio, Adachi Yoshitaka

ADVANCED THEORY AND SIMULATIONS   Vol. 2 ( 10 )   2019.10

Operando Visualization of Morphological Dynamics in All-Solid-State Batteries

Wu Xiaohan, Billaud Juliette, Jerjen Iwan, Marone Federica, Ishihara Yuya, Adachi Masaki, Adachi Yoshitaka, Villevieille Claire, Kato Yuki

ADVANCED ENERGY MATERIALS   Vol. 9 ( 34 )   2019.9

Relationship between three-dimensional microstructure and Avrami exponent for recrystallization in pure iron Reviewed

Toshiaki Matsui, Toshio Ogawa, Yoshitaka Adachi

Resules in Materials   Vol. 1   page： 1000002   2019.7

Influence of algorithm parameters of Bayesian optimization, genetic algorithm, and particle swarm optimization on their optimization performance

ZhiLei Wang, Toshio Ogawa, Yoshitaka Adachi

Advanced Theory and Simulations     page： 1900110   2019.7

Evaluation of tensile properties of ferrite single-phase low-carbon steel with different initial microstructures Reviewed

Toshio Ogawa, H.Dannoshita, Yoshitaka Adachi

AIMS material science     page： 100   2019.7

Improved Thermoelectric Properties of Hot-Extruded Bi-Te-Se Bulk Materials with Cu Doping and Property Predictions via Machine Learning

Wang Zhi-Lei, Yokoyama Yuuki, Onda Tetsuhiko, Adachi Yoshitaka, Chen Zhong-Chun

ADVANCED ELECTRONIC MATERIALS   Vol. 5 ( 6 )   2019.6

Property prediction and properties-to-microstructure inverse analysis of steels by a machine-learning approach

Wang Zhi-Lei, Adachi Yoshitaka

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING   Vol. 744   page： 661 - 670   2019.1

Property prediction and properties-to-microstructure inverse analysis of steels by a machine-learning approach Reviewed

ZhiLei Wang, Yoshitaka Adachi

Material Science and Engineering A   Vol. 744 ( 28 ) page： 661-667   2019.1

Properties-to-microstructure-to-processing Inverse Analysis for Steels via Machine Learning

Wang Zhi-Lei, Ogawa Toshio, Adachi Yoshitaka

ISIJ INTERNATIONAL   Vol. 59 ( 9 ) page： 1691 - 1694   2019

Evaluation of tensile properties of ferrite single-phase low-carbon steel with different initial microstructures

Ogawa Toshio, Dannoshita Hiroyuki, Adachi Yoshitaka

AIMS MATERIALS SCIENCE   Vol. 6 ( 5 ) page： 798 - 805   2019

理論式の高精度化のためのパラメータ推定

足立吉隆, ZhiLei Wang

ふぇらむ   Vol. 23 ( 12 ) page： 42-49   2018.12

Cutting Edge of Steel Informatics and Future Prospects Reviewed

  Vol. 23 ( 6 ) page： 25-31   2018.6

A strategy to predict the fracture toughness of steels with a banded ferrite-pearlite structure based on the micromechanics of brittle fracture initiation

Shibanuma Kazuki, Nemoto Yoshiki, Hiraide Takashi, Suzuki Katsuyuki, Sadamatsu Sunao, Adachi Yoshitaka, Aihara Shuji

ACTA MATERIALIA   Vol. 144   page： 386 - 399   2018.2

先進的画像処理による組織検出 Reviewed

田口茂樹, 弘川奨悟,安田格,徳田耕平,足立吉隆

鉄と鋼   Vol. 103   page： 142   2017

DP鋼の応力―ひずみ曲線を支配する組織因子のスパース学習 Reviewed

弘川奨悟,田口茂樹,松下康弘,足立吉隆

鉄と鋼   Vol. 103   page： 468   2017

機械学習支援の材料情報統合システム Invited Reviewed

足立吉隆,松下康弘,上村逸郎,井上純哉

システム制御情報学会誌   Vol. 61   page： 188   2017

3D observation of micro-cracks as cleavage fracture initiation site in ferrite-pearlite steel Reviewed

Yoshiki Nemoto, Kazuki Shibanuma, Katsuyuki Suzuki, Yoshitaka Adachi, Shuji Aihara

ISIJ International   Vol. 57   page： 746   2017

先進的画像処理による組織検出 Reviewed

田口茂樹, 弘川奨悟,安田格,徳田耕平,足立吉隆

鉄と鋼   Vol. 103   page： 142   2017

Sparse Modelling to Screen Microstructural Factors Dominantly Controlling a Stress-strain Curve of DP Steels

Hirokawa Shogo, Taguchi Shigeki, Matsushita Yasuhiro, Adachi Yoshitaka

TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN   Vol. 103 ( 8 ) page： 468 - 474   2017

材料工学における人工知能の活用 Invited Reviewed

足立吉隆, 材料工学における人工知能の活用

機能材料   Vol. 36 ( 9 ) page： 40   2016

初歩的な人工知能によるDP鋼の高次元組織データ駆動型応力−ひずみ曲線の予測 Reviewed

足立 吉隆, 新川田 圭介, 奥野 晃弘, 弘川 奨奨悟, 田口 茂樹

鉄と鋼   Vol. 102 ( 1 ) page： 47   2016

画像相関法によるFe-Mn-Si合金フェライトの塑性変形挙動解析 Reviewed

田畑亮, 鶴園弘明, 定松直, 足立吉隆

熱処理   Vol. 55 ( 6 ) page： 368   2016

ディープラーニングによる組織識別率の検証 Reviewed

足立吉隆,田口茂樹,弘川奨悟

鉄と鋼   Vol. 102 ( 12 ) page： 722   2016

情報統計力学に基づいた高次元データ駆動型特性予測 Invited Reviewed

足立吉隆, 増田雄太, 吉田拓真, 松下康弘

軽金属   Vol. 64 ( 11 ) page： 1   2014

In situ observation of pseudoelasticity in Fe3Al single crystals with DO3 structure, Reviewed

Hiroyuki Y. Yasuda, Yasuhiro Oda, Takenori Maruyama, Mayumi Ojima, Yoshitaka Adachi

Materials Transaction   Vol. 55 ( 5 ) page： 788   2014

Modeling and Simulations of Experimentally-Observed Dislocation Substructures Based on Field Theory of Multiscale Plasticity (FTMP) Combined with TEM and EBSD-Wilkinson Method for FCC and BCC Poly/Single Crystals Reviewed

T. Hasebe, M. Sugiyama, Y. Adachi, S. Fukutani and M. Iida

Materials Transaction   Vol. 55 ( 5 ) page： 779   2014

Stress Corrosion Cracking Behavior at Inconel and Low Alloy Steel Weld Interface Reviewed

Shin Daikuhara, Shun Nagayama, Masanori Sugawara, Norihiko Ozawa, Yoshitaka Adachi, Stefanus Harjo, Shigeo Hattori

Metall. Mater. Trans   Vol. 45A ( 12 ) page： 6103   2014

材料組織の形態評価の変遷と展望 Invited Reviewed

佐藤直子, 足立吉隆

鉄と鋼   Vol. 100 ( 10 ) page： 1182   2014

Influence of Carbide Particles on the Grain Growth of Ferrite in an Fe0.1C0.09V Alloy Reviewed

Takafumi OIKAWA, Jing Jing ZHANG, Masato ENOMOTO and Yoshitaka ADACHI

ISIJ International   Vol. 53 ( 7 ) page： 1245   2013

Quantitative analysisofthree-dimensional morphology of martensite packets and blocks in iron-carbon-manganese steels Reviewed

Shigekazu Morito, Yuma Edamatsu, Kenta Ichinotani, Takuya Ohba, Taisuke Hayashi, Yoshitaka Adachi, Tadashi Furuhara, Goro Miyamoto, Naoki Takayama

Journal of alloys and compounds   Vol. 577S   page： S587   2013

Lengthening kinetics of ferrite plates in high-strength low-carbonlow alloy steel

X. L. Wan, R. Wei, L. Cheng , M. Enomoto, Y. Adachi

J Mater Sci   Vol. 48   page： 4345   2013

X線コンピュータ断層撮影を用いた応力腐食割れの３次元観察

川喜田仁、篠原正、渡辺誠、足立吉隆

材料と環境   Vol. 62 ( 3 ) page： 111   2013

Microstructure and cleavage in lath martensitic steels Reviewed

John W. Morris, Jr., Chris Kinney, K. Pytlewski, Yoshitaka Adachi

SCIENCE AND TECHNOLOGY OF ADVANCED MATERIALS   Vol. 14 ( 1 ) page： 1   2013

Study of creep cavitation behavior in tempered martensitic steelusing synchrotron micro-tomography and serial sectioning techniques Reviewed

C. Gupta, H. Toda, C. Schlacher, Y. Adachi, P. Mayr, C. Sommitsch, K. Uesugi,Y. Suzuki, A. Takeuchi, M. Kobayashi

Materials Science and Engineering A   Vol. A564   page： 525   2013

ひずみ分布の測定手法の進展ー鉄鋼ゲノム解明の一環としてー Invited Reviewed

足立吉隆、小島真由美、諸岡聡、友田陽

塑性と加工   Vol. 53 ( 621 ) page： 883   2012

3Dによる微細構造解析技術の展望と構造材料への応用 Invited Reviewed

波多聰, 嶋田雄介, 光原昌寿, 池田賢一, 中島英治, 松村晶, 足立吉隆

山陽特殊製鋼技報   Vol. 19 ( 1 ) page： 15   2012

Topological Approach to Ferrite/Martensite Dual-phase Microstructure Reviewed

Naoko Sato, Yoshitaka Adachi,Hiroyuki Kawata and Kenji Kaneko

ISIJ International   Vol. 52 ( 7 ) page： 1370   2012

3D計量形態学と全自動シリアルセクショニング3D顕微鏡の開発 Invited Reviewed

足立吉隆, 佐藤直子, 小島真由美, Yuan-Tsung Wang

独）日本学術振興会製鋼第19委員会凝固プロセス研究科資料     page： 1   2011

コンピューター支援3D計量形態学 Invited Reviewed

足立吉隆

軽金属   Vol. 61   page： 78   2011

位相幾何学, 微分幾何学に基づく定量3D/4D組織学への挑戦 Invited Reviewed

足立吉隆

ふぇらむ   Vol. 15   page： 762   2010

階層的3D/4D解析の現状と3Dフラクトグラフィー Invited Reviewed

足立吉隆，小島真由美

検査技術   Vol. 15   page： 23   2010

Crystallographic analysis of nanobainitic steels Reviewed

H. Beladi, Y.Adachi, I. Timokhina and P.D. Hodgson

Scripta Materialia   Vol. 60   page： 455   2009

Hierarchical characterization of heterogeneous deformation behavior of lamellar pearlite in eutectoid steel Reviewed

Y. Adachi, S. Morooka, H. Igari, T. Suzuki and Y. Tomota

Netsusyori   Vol. 49   page： 454   2009

Three Dimensional Analysis of the Ultra Low Carbon Steel Lath Martensite Reviewed

Y. Edamatsu, S. Morito, T. Ohba and Y. Adachi

Netsusyori   Vol. 49   page： 632   2009

Evaluation of cementite spheroidizing for a pearlite steel by small-angle neutron scattering Reviewed

Satoshi Morooka, Masato Ohnuma, Yoshitaka Adachi, Jun-ichi Suzuki and Yo Tomota

Netsusyori   Vol. 49   page： 466   2009

Morphology and Crystallography of Sub-Blocks in Ultra-Low Carbon Lath Martensite Steel Reviewed

S.Morito, Y.Adachi and T.Ohba

Materials Transactions   Vol. 50   page： 1919   2009

Weak beam TEM study on stacking fault energy of high nitrogen steels Reviewed

M. Ojima, Y. Adachi, Y. Tomota, Y. Katada, Y.Kaneko, K.Kuroda and H.Saka

Steel Research International   Vol. 80   page： 477   2009

高窒素オーステナイト鋼の低温脆性破面の３次元結晶学的解析 Reviewed

小島真由美, 足立吉隆, 友田陽

日本金属学会誌   Vol. 73   page： 283   2009

コンピューター支援による3Dフラクトグラフィー Reviewed

足立吉隆，小島真由美

熱処理   Vol. 49   page： 99   2009

Dynamic recrystallization behavior in a low-carbon martensite steel during warm compression Reviewed

J. Li, P. Xu, Y. Tomota and Y. Adachi

ISIJ International   Vol. 48   page： 1008   2008

Computer-aided 3D visualization of twisted cementite lamellae in eutectoid steel Reviewed

Y.Adachi, S.Morooka, K.Nakajima and Y.Sugimoto

Acta Materialia   Vol. 56   page： 5995   2008

Effect of volume fraction and carbon concentration of austenite on formation of ultrafine grained ferrite/austenite duplex microstructure by warm compression Reviewed

P.G.Xu, J.Li, Y.Tomota and Y.Adachi

ISIJ International   Vol. 48   page： 1609   2008

Crystallography and kinetics of dynamic transformation in steels Reviewed

Y. Adachi, P.G. Xu and Y. Tomota

ISIJ International   Vol. 4   page： 1056   2008

Slip system partitioning as a possible mechanism for ultrafine grain formation in Fe-3%Si bicrystals Reviewed

D. Dorner, Y. Adachi and K. Tsuzaki

ISIJ International   Vol. 48   page： 1102   2008

EBSDと中性子回折によるマルテンサイト鋼の階層的不均一変形挙動の解析 Reviewed

諸岡聡, 友田陽, 足立吉隆, 森戸茂一, 神山崇

鉄と鋼   Vol. 94   page： 313   2008

3D-EBSD法による三次元可視化 Invited Reviewed

足立吉隆

ふぇらむ   Vol. 13   page： 676   2008

材料組織解析におけるEBSD解析の進展 Invited Reviewed

鈴木清一，足立吉隆

まてりあ,   Vol. 47   page： 72   2008

ULTRA RAPID SOFTENING OF HIGH STRENGTH STRUCTURAL STEELS BY THERMOMECHANICAL TREATMENT Reviewed

Y.Adachi and K.Tsuzaki

Materials Science Forum   Vol. 539-543   page： 4807   2007

Periodic crystal lattice rotation in microband groups Reviewed

D. Dorner, Y. Adachi, K. Tsuzaki

Scripta Materialia   Vol. 57   page： 775   2007

Effect of Carbon Addition on Ultrafine Grained Microstructure Formation by Warm Compression for Fe-18Ni Alloys Reviewed

P.G. Xu, J.H. Li, Y. Tomota and Y. Adachi

Materials Science Forum   Vol. 558-559   page： 601   2007

Formation of Ferrite-Cementite Ultrafine Grained Microstructure by Warm Compression for SM490 Martensite Steel Reviewed

J.H. Li, P.G. Xu, Y. Tomota, Y. Adachi

Materials Science Forum,   Vol. 558-559   page： 539   2007

Microband-to-microshear band transition near grain boundaries in bcc steel Reviewed

D. Dorner, Y. Adachi and K. Tsuzaki

Materials Science Forum   Vol. 558-559   page： 873   2007

Crystallography of bcc precipitates at grain boundary corners in fcc matrix Reviewed

T.Takeuchi, Y.Adachi, D.Dorner, M.Enomoto

Materials Science Forum   Vol. 561-565   page： 69   2007

The Formation of Ultrafine Ferrite Through Static Transformation in Low Carbon Steels Reviewed

Y.Adachi, M.Wakita, H.Beladi and P.D.Hodgson

Acta Materialia   Vol. 55   page： 4925   2007

Tracing the Goss orientation during deformation and annealing of an FeSi single crystal Reviewed

D. Dorner, Y. Adachi, K. Tsuzaki and Stefan ZAEFFERER

Materials Science Forum   Vol. 550   page： 485   2007

CRYSTALLOGRAPHY AND MECHANICAL PROPERTIES OF ULTRAFINE TRIP-AIDED MULTI-PHASE STEELS Reviewed

M. Wakita, Y. Adachi and Y. Tomota

Materials Science Forum   Vol. 539-543   page： 4351   2007

静的・動的フェライト変態挙動の最近の解析 Invited Reviewed

足立吉隆，友田陽

ふぇらむ   Vol. 12   page： 753   2007

Austenite-to-Ferrite Transformation in Low Alloy Steels during Thermomechanically Controlled Process Studied by In Situ Neutron Diffraction Reviewed

P.G. Xu, Y. Tomota, P. Lukas, O. Muransky, Y. Adachi

Materials Science and Engineering A   Vol. 435-436   page： 46   2006

In Situ Neutron Diffraction during Thermo-Mechanically Controlled Process in Low Alloy Steels Reviewed

M.S.Koo, P.G.Xu, J.H.Li, Y.Tomota, O.Muransky, P.Lukas and Y.Adachi

  Vol. 118   page： 419   2006

Y. Adachi, F.Yin, H.Hakata, K.Tsuzaki Reviewed

Y. Adachi, F.Yin, H.Hakata, K.Tsuzaki

Material Science ForumVariant Selection in Fcc-to-Bcc Precipitation at Grain Boundaries in Ni-43Cr Alloy   Vol. 475-479   page： 305   2005

Coherent-to-incoherent transition of intergranular bcc-precipitate by pre-/ post-deformations in a Ni-43Cr Alloy Reviewed

Y.Adachi, K.Tsuzaki

ISIJ International   Vol. 45   page： 1703   2005

Crystallographic analysis of grain boundary Bcc recipitates in a NiCr alloy by FESEM/EBSD and TEM/Kikuchi line methods

Y. Adachi, H.Hakata, and K.Tsuzaki

Materials Science and Engineering A   Vol. 412   page： 252   2005

Dynamic recrystallisation of a martensite steel by rapid heating and compression Reviewed

Y.Z.Bao, Y.Tomota, T.Suzuki, Y.Adachi

Scripta Materilia   Vol. 53   page： 1471   2005

18Ni,17Ni-0.2CおよびSM490鋼マルテンサイトの動的再結晶挙動 Reviewed

包耀宗, 足立吉隆, 徐平光, 鈴木徹也, 友田陽

鉄と鋼   Vol. 91   page： 602   2005

Light Predeformation induced misorientation of grain boundary bcc-precipitates from the Kurdjumov-Sacks relationship in a NiCr alloy Reviewed

Y. Adachi, K.Tsuzaki

Metal and Material International   Vol. 11   page： 341   2005

Microstructure Evolution in Ferritic Stainless steels during Large Strain deformation Reviewed

A.Belyakov, Y. Adachi, Y.Kimura and K.Tsuzaki

Materials Transactions   Vol. 45   page： 2812   2004

Effect of Copper on Tensile Properties and Grain-Refinement of Steel and its Relation to Precipitation Behavior Reviewed

S.Takaki, M.Fujioka, S.Aihara, Y.Nagataki, T.Yamashita, N.Sano, Y. Adachi, M.Nomura, H.Yaguchi

Materials Transactions   Vol. 45   page： 2812   2004

Tensile Behavior of TRIP-Aided Multi-Phase Steels Studied by in situ Neutron Diffraction

Y.Tomota, H.Tokuda, Y.Thomine, Y. Adachi, M.Wakita, N.Minakawa, A.Moriai, Y.Morii

Acta Materrialia   Vol. 52   page： 5737   2004

合金化溶融亜鉛メッキ鋼板の皮膜密着性に及ぼす鋼中Siの影響 Reviewed

土岐保, 荒井正浩, 足立吉隆

鉄と鋼   Vol. 89   page： 46   2003

Trigger for the occurrence of grain coarsening phenomenon of BS304S31 austenite stainless steel under small plastic strain at high temperature Reviewed

Masayoshi Akiyama, Yutaka Neishi, Yoshitaka Adachi, Kenjiro Terada

Engineering Computations   Vol. 20   page： 499   2003

New concepts for ultra refinement of grain size in Super Metal Project Reviewed

M.Niikura, M.Fujioka, Y. Adachi, A.Matsukura, T.Yokota, Y.Shirota, Y.Hagiwara

J MATER PROCESS TECH   Vol. 117   page： 341   2001

Dislocation substructures in hot-deformed Ni-based alloys: Simulation for structure evolution of hot-worked austenite in low carbon steels Reviewed

Y. Adachi, T.Tomida, S.Hinotani

ISIJ International   Vol. 40   page： 194   2000

急冷途中の大ひずみ加工による低炭素鋼フェライト結晶粒の超細粒化 Reviewed

足立吉隆, 富田俊郎, 日野谷重晴

鉄と鋼   Vol. 85   page： 620   1999

急冷途中の大ひずみ加工による結晶粒超微細化挙動に及ぼす合金元素の影響 Reviewed

足立吉隆, 富田俊郎, 日野谷重晴

鉄と鋼   Vol. 85   page： 691   1999

Fe/Zn反応拡散挙動に及ぼすFe中のPの影響 Reviewed

足立吉隆, 荒井正浩

鉄と鋼   Vol. 84   page： 279   1998

Transformation of Fe-Al phase to Fe-Zn phase on pure iron during galvanizing Reviewed

Y. Adachi, M.Arai

Materials Science and Engineering A   Vol. 254   page： 305   1998

Fe(Zn)系における拡散誘起再結晶(DIR)のEBSD解析, Reviewed

足立吉隆. 関彰

日本金属学会誌   Vol. 62   page： 754   1998

合金化溶融亜鉛メッキ鋼板におけるFe-Zn合金相の析出・成長挙動に及ぼす鋼中Pの影響 Reviewed

荒井正浩, 足立吉隆, 中森俊夫, 薄木智亮

鉄と鋼   Vol. 83   page： 713   1997

Effect of microstructure of base steel on Fe-Zn alloy growth during galvanizing of an interstitial free steel Reviewed

T. Nakamori, Y.Adachi, T.Toki

ISIJ International   Vol. 36   page： 179   1996

TEM study of Diffusional alfa-Fe/Zn interface

Y. Adachi, K. Kamei

Acta Materialia   Vol. 43   page： 3189   1995

Coating adhesion and interface structure of galvanealed steel Reviewed

T.Nakamori, Y.Adachi, M.Arai

ISIJ International   Vol. 35   page： 1494   1995

A crystallographic study of Diffusional alpha Fe/Zn interfaces Reviewed

Y.Adachi, WM Stobbs

Inst. Phys. Conf. Ser   Vol. 147   page： 471   1995

合金化溶融亜鉛めっき鋼板の皮膜密着性と界面構造 Reviewed

足立吉隆, 荒井正浩, 中森俊夫

鉄と鋼   Vol. 80   page： 225   1994

合金化溶融亜鉛めっき鋼板の皮膜/基板界面密着強度と皮膜/基板界面構造に及ぼす溶融Zn中Alの効果 Reviewed

足立吉隆, 荒井正浩, 中森俊夫

鉄と鋼   Vol. 80   page： 647   1994

溶融亜鉛メッキ鋼板の結晶学的研究 Reviewed

足立吉隆, 中森俊夫, 亀井一人

日本金属学会誌   Vol. 56   page： 1235   1992

A Roll of Hydrogen in Shape Memory Reviewed

N.Wade, Y.Adachi, Y.Hosoi

Scripta Materialia   Vol. 24   page： 1051   1990

Ti-Ni合金の形状記憶効果と変態挙動に及ぼす水素の影響 Reviewed

足立吉隆, 和出昇, 細井祐三

日本金属学会誌   Vol. 54   page： 523   1990

マテリアルズインフォマティクス～機械学習を活用した材料工学への誘い～

足立吉隆（ Role： Sole author）

デザインエッグ  2016.4 

しなやかで強い鉄鋼材料(革新的構造用金属材料の開発最前線），

足立吉隆（ Role： Joint author）

NTS  2016.4 

3D材料組織・特性解析の基礎と応用―シリアルセクショニング実験およびフェーズフィールド法からのアプローチ―,

足立吉隆、小山敏幸（ Role： Joint author）

内田老鶴圃  2014.4 

鉄鋼便覧第5巻

足立吉隆（ Role： Joint author）

日本鉄鋼協会  2014.4 

ステンレス鋼の科学と最新技術―ステンレス鋼100年の歩み―,

足立吉隆（ Role： Joint author）

日本ステンレス協会  2011.4 

高次元材料情報学

2017.6

国内共同研究 

高次元材料情報学

2017.6

国内共同研究 

高次元材料情報学

2017.6

学内共同研究 

高次元マテリアルズインフォマティクス

2017.4 - 2019.3

トヨタ先端共同研究 

高次元材料情報学

2009.10 - 2011.9

天田金属加工機械技術振興財団助成金 

高次元材料情報学

2008.6 - 2009.5

JFE21世紀財団助成金 

高次元材料情報学

2004.10 - 2005.9

研究助成金池谷科学技術振興財団 

Management of Science for Creation of Materials by Super-Thermal Field

Grant number：21H05192  2021.9 - 2026.3

Grants-in-Aid for Scientific Research  Grant-in-Aid for Transformative Research Areas (A)

同一視野ハイブリッド組織観察法の確立

2011.4 - 2013.3

科学研究費補助金  同一視野ハイブリッド組織観察法の確立

ニッケル省資源型高窒素ステンレス鋼の組織制御に関する研究

2010.4 - 2012.3

科学研究費補助金  基盤研究(C)

SCCき裂先端における変形挙動の解析

2008.4 - 2010.3

科学研究費補助金  基盤研究(C)

高次元材料情報学

2008.4 - 2010.3

科学研究費補助金  基盤研究(C)

11. 結晶粒の微細な高張力鋼の製造方法

藤岡政昭, 阿部義男, 萩原行人, 横田智之, 新倉正和, 足立吉隆, 富田俊郎, 枩倉功和, 難波茂信

10. 微細結晶粒組織鋼の製造方法

枩倉功和, 難波茂信, 藤岡政昭, 横田智之, 足立吉隆

細粒組織を有する鋼およびその製造方法

足立吉隆, 藤岡政昭, 難波茂信, 横田智之

亜鉛系複合めっき金属板およびその製造方法

木本雅也, 土屋宏之, 足立吉隆, 石井一也

7. 耐低温チッピング性に優れた合金化溶融亜鉛めっき鋼板

足立吉隆, 土岐保, 富田俊郎, 荒井正浩

耐皮膜破壊性に優れた合金化処理亜鉛めっき鋼板

矢川敦久, 足立吉隆, 若野茂

合金化処理亜鉛めっき鋼板およびその製造方法

矢川敦久, 足立吉隆, 若野茂

合金化溶融亜鉛めっき鋼板

中森俊夫, 堀雅彦, 足立吉隆

合金化溶融亜鉛めっき鋼板およびその製造方法

中森俊夫, 足立吉隆

接着接合性に優れた合金化溶融亜鉛めっき鋼板

荒井正浩, 中森俊夫, 薄木智亮, 足立吉隆, 福井清之

合金化溶融亜鉛めっき鋼板

中森俊夫、足立吉隆、土岐保

鉄鋼材料学

2017

材料工学実験第２

2017

Analytical chemistry

2017

統合型材料デザイン

2017

マテリアルズインフォマティクス（アークイノベーション）

Role(s)：Lecturer

アークイノベーション  2017.10 - 2018.3