Updated on 2024/03/29
Dr. Eng. （ 2009.3 Nagoya University ）
ウェットプロセス
プラズマプロセス
機能性表面
薄膜
炭素材料
金属材料
Nanotechnology/Materials / Structural materials and functional materials
Nanotechnology/Materials / Composite materials and interfaces
骨含有元素とチタンの合金化・複合化による骨形成能に優れた表面の創製
液中プラズマプロセスによる材料合成
チタン/アモルファス炭素微細テクスチャーによる高骨形成能・骨接着性表面の創製
東京工業大学 大学院理工学研究科 機械物理工学専攻 助教
2014.7 - 2016.3
Country：Japan
東北大学 金属材料研究所 生体材料学研究部門 助教
2011.3 - 2014.6
Country：Japan
名古屋大学 大学院工学研究科 マテリアル理工学専攻 助教
2009.7 - 2011.2
Country：Japan
名古屋大学 大学院工学研究科 マテリアル理工学専攻 COE研究員
2009.4 - 2009.6
Country：Japan
Nagoya University Graduate School, Division of Engineering Department of Materials, Physics and Energy Engineering
2006.4 - 2009.3
Country： Japan
Nagoya University Graduate School, Division of Engineering Department of Materials, Physics and Energy Engineering
2004.4 - 2006.3
Country： Japan
Nagoya University Faculty of Engineering Department of Physical Science and Engineering
2000.4 - 2004.3
Country： Japan
The Japan Society of Applied Physics
The Japan Institute of Metals
日本表面真空学会
日本表面真空学会 スパッタリングおよびプラズマプロセス技術部会 幹事
2020.4
Committee type：Academic society
日本学術振興会 プラズマ材料科学第153委員会 委員
2018.4
Committee type：Academic society
軽金属学会第132回春期大会実行委員 会場係
2016 - 2017.5
Committee type：Academic society
平成28年度JSME機械材料・材料加工部門第５技術委員会(分科会・研究会)委員 委員
2016
Committee type：Academic society
平成28年度JSME機械材料・材料加工部門第８技術委員会(企画・産学交流関係)委員 委員
2016
Committee type：Academic society
第23回奨励賞
2013.9 公益社団法人日本金属学会
Nature COE 若手研究奨励賞
2006.1 名古屋大学 Nature COE
日本金属学会2004年秋期 (第135回) 大会 優秀ポスター賞
2004.9 日本金属学会
Color-Changing Paper: Cellulose Nanofiber Films Incorporating Mechanochromic Fluorenylidene-Acridane Reviewed
Keisuke Ogumi, Takehiro Arakawa, Bungo Okudera, Yuki Takimoto, Kohki Nagata, Kentaro Mishiba, Eiji Abe, Tomonaga Ueno, Junko Hieda, Kenji Omote, Hao-Sheng Lin, Yutaka Matsuo
ACS Applied Engineering Materials Vol. 2 ( 2 ) page： 397 - 403 2024.1
Preparation of Titanium-Calcium Alloy Films and Evaluation of Hydroxyapatite Formation Ability Reviewed
Hieda, J; Kato, A; Kuroyanagi, H
MATERIALS TRANSACTIONS Vol. 64 ( 12 ) page： 2801 - 2807 2023.12
Investigation of the sulfonation mechanism by gas-liquid interfacial plasma under atmospheric pressure conditions Reviewed International coauthorship International journal
Deng, SQ; Takeuchi, N; Hieda, J; Takahashi, K; Tachibana, K; Li, OL
JOURNAL OF PHYSICS D-APPLIED PHYSICS Vol. 55 ( 34 ) 2022.8
Synthesis of poly(<i>N</i>-isopropylacrylamide) by plasma-in-liquid process Reviewed International journal
Hieda, J; Nakashima, H; Hirano, M
JAPANESE JOURNAL OF APPLIED PHYSICS Vol. 60 ( 4 ) page： 046004-1 - 046004-6 2021.4
Relationships between surface energy and charge of surface-modified titanium and HAp formation Reviewed
Hieda Junko, Sakaguchi Akira, Nakano Masayuki, Akasaka Hiroki, Ohtake Naoto
APPLIED SURFACE SCIENCE Vol. 465 page： 509 - 516 2019.1
Effect of Si incorporation on corrosion resistance of hydrogenated amorphous carbon film Reviewed
Jumpei Nishikawa, Naoki Sugihara, Masayuki Nakano, Junko Hieda, Naoto Ohtake, Hiroki Akasaka
Diamond & Related Materials Vol. 90 page： 207 - 213 2018.11
ホウ素添加DLC膜の合成とその摩擦磨耗特性及び血液適合性評価 Invited
稗田純子, シャヒラ リザ カミス, 赤坂大樹, 大竹尚登
セラミックデータブック 2017/18 (工業と製品) Vol. 45 ( 99 ) page： 156-159 2017.12
Nemoto Shimpei, Ueno Tomonaga, Watthanaphanit Anyarat, Hieda Junko, Bratescu Maria Antoaneta, Saito Nagahiro
JAPANESE JOURNAL OF APPLIED PHYSICS Vol. 56 ( 9 ) 2017.9
Crystallinity and surface state of cellulose in wet ball-milling process
Nemoto Shimpei, Ueno Tomonaga, Watthanaphanit Anyarat, Hieda Junko, Saito Nagahiro
JOURNAL OF APPLIED POLYMER SCIENCE Vol. 134 ( 22 ) 2017.6
逆ミセル構造を利用するソリューションプラズマ合成ナノカーボンの比表面積制御 Reviewed
森下哲典, 上野智永, 吉田彰仁, 稗田純子, 齋藤永宏
表面技術 Vol. 68 ( 3 ) page： 153–157 2017.3
ソリューションプラズマを用いて作製した酸化亜鉛ナノ粒子の粒径に及ぼすプラズマ生成パラメータの影響 Reviewed
根本心平, 上野智永, Anyarat Watthanaphanit, 稗田純子, 齋藤永宏
表面技術 Vol. 68 ( 3 ) page： 147–152 2017.3
Deposition of boron doped DLC films on TiNb and characterization of their mechanical properties and blood compatibility Reviewed
Shahira Lisa, Junko Hieda, Hiroki Akasaka, Naoto Ohtake, Yusuke Tsutsumi, Akiko Nagai, Takao Hanawa
Science and Technology of Advanced Materials Vol. 18 ( 1 ) page： 76–87 2017.1
Fastest Formation Routes of Nanocarbons in Solution Plasma Processes Reviewed
Tetsunori Morishita, Tomonaga Ueno, Gasidit Panomsuwan, Junko Hieda, Akihito Yoshida, Maria Antoaneta Bratescu, Nagahiro Saito
Scientific Reports Vol. 6 page： 36880 2016.11
DFT calculation of oxygen adsorption on a core-single shell ZnNb catalyst Reviewed
Tetsunori Morishita, Tomonaga Ueno, Gasidit Panomsuwan, Junko Hieda, Maria Antoaneta Bratescu, Nagahiro Saito
RSC ADVANCES Vol. ６ ( 100 ) page： 98091–98095 2016.9
Differences in intermediate structures and electronic states associated with oxygen adsorption onto Pt, Cu, and Au clusters as oxygen reduction catalysts Reviewed
Tetsunori Morishita, Tomonaga Ueno, Gasidit Panomsuwan, Junko Hieda, Maria Antoaneta Bratescu, Nagahiro Saito
Vol. 49 ( 41 ) page： 415305 2016.8
Adhesive strength of bioactive oxide layers fabricated on TNTZ alloy by three different alkali-solution treatments Reviewed
Eri Takematsu, Ken Cho, Junko Hieda, Masaaki Nakai, Ken-ichi. Katsumata, Kiyoshi Okada, Mitsuo Niinomi, Nobuhiro Matsushita
Journal of the Mechanical Behavior of Biomedical Materials Vol. 61 page： 174–181 2016.8
Evaluation of Adhesion of Hydroxyapatite Films Fabricated on Biomedical β-Type Titanium Alloy after Immersion in Ringer's Solution Reviewed
Junko Hieda, Mitsuo Niinomi, Masaaki Nakai, Ken Cho, Ayaka Matsubara
Vol. 56 ( 10 ) page： 1703–1710 2015.9
In vitro biocompatibility of Ti-Mg alloys fabricated by direct current magnetron sputtering Reviewed
Junko Hieda, Mitsuo Niinomi, Masaaki Nakai, Ken Cho
Materials Science and Engineering: C Vol. 54 page： 1-7 2015.9
Dependence of ion concentration in simulated body fluid on apatite precipitation on titania surface Reviewed
Akira Sakaguchi, Masayuki Nakano, Junko Hieda, Naoto Ohtake, Hiroki Akasaka
Applied Surface Science Vol. 347 page： 610–618 2015.8
Microstructural evolution of precipitation-hardened beta-type titanium alloy through high-pressure torsion Reviewed
Yilmazer Hakan, Mitsuo niinomi, Ken Cho, Masaaki Nakai, Junko Hieda, S. Sato, Yoshikazu Todaka
Vol. 80 page： 172-182 2014.11
Mechanical Properties, Microstructures, and Biocompatibility of Low-Cost β-Type Ti-Mn Alloys for Biomedical Application Reviewed
Ken Cho, Mitsuo Niinomi, Masaaki Nakai, Junko Hieda, Pedro Fernandes Santos, Yoshinori Itoh, Masahiko Ikeda
Biomaterials Science: Processing, Properties and Applications IV: Ceramic Transactions Vol. 251 page： 21-30 2014.9
Bending springback behavior related to deformation-induced phase transformations in Ti-12Cr and Ti-29Nb-13Ta-4.6Zr alloys for spinal fixation applications Reviewed
Huihong Liu, Mitsuo Niinomi, Masaaki Nakai, Junko Hieda, Ken Cho
Journal of the Mechanical Behavior of Biomedical Materials Vol. 34 page： 66-74 2014.7
Changeable Young's modulus with large elongation-to-failure in beta-type titanium alloys for spinal fixation applications Reviewed
Huihong Liu, Mitsuo Niinomi, Masaaki Nakai, Junko Hieda, Ken Cho
Scripta Materialia Vol. 82 page： 29–32 2014.7
Hardening behavior after high-temperature solution treatment of Ag-20Pd-12Au-xCu alloys with different Cu contents for dental prosthetic restorations Reviewed
Yonghwan Kim, Mitsuo Niinomi, Junko Hieda, Masaaki Nakai, Ken Cho, Hisao Fukui
Journal of the Mechanical Behavior of Biomedical Materials Vol. 35 page： 123-131 2014.7
Biomedical polymer surface modification of beta-type titanium alloy for implants through anodic oxide nanostructures Reviewed
Junko Hieda, Mitsuo Niinomi, Masaaki Nakai, Ken Cho
Materials Science Forum Vol. 783-786 page： 1261–1264 2014.5
Contribution of β' and β precipitates to hardening in as-solutionized Ag-20Pd-12Au-14.5Cu alloys for dental prosthesis applications Reviewed
Yonghwan Kim, Mitsuo Niinomi, Junko Hieda, Masaaki Nakai, Ken Cho, Hisao Fukui
Materials Science and Engineering C Vol. 37 page： 204–209 2014.4
Precipitation of β' phase and hardening in dental-casting Ag-20Pd-12Au-14.5Cu alloys subjected to aging treatments Reviewed
Yonghwan Kim, Mitsuo Niinomi, Junko Hieda, Masaaki Nakai, Ken Cho, Hisao Fukui
Materials Science & Engineering C Vol. 36 page： 329–335 2014.3
Adhesive strength of medical polymer on anodic oxide nanostructures fabricated on biomedical β-type titanium alloy Reviewed
Junko Hieda, Mitsuo Niinomi, Masaaki Nakai, Ken Cho, Tomoyoshi Mohri, Takao Hanawa
Materials Science and Engineering: C Vol. 36 page： 244–251 2014.3
MECHANICAL PROPERTIES OF BIOMEDICAL β-TYPE TITANIUM ALLOY WITH RARE-EARTH METAL OXIDE PARTICLES FORMED BY RARE-EARTH METAL ADDITION Reviewed
Junko Hieda, Mitsuo Niinomi, Masaaki Nakai, Ken Cho
TMS 2014 143rd Annual Meeting & Exhibition, Annual Meeting Supplemental Proceedings page： 129-135 2014.2
Deformation-induced changeable Young's modulus with high strength in beta-type Ti-Cr-O alloys for spinal fixture Reviewed
Huihong Liu, Mitsuo Niinomi, Masaaki Nakai, Junko Hieda, Ken Cho
Journal of the Mechanical Behavior of Biomedical Materials Vol. 30 page： 205-213 2014.2
Reduction in anisotropy of mechanical properties of coilable (α+β)-type titanium alloy thin sheet through simple heat treatment for use in next-generation aircraft applications Reviewed
Masaaki Nakai, Mitsuo Niinomi, Junko Hieda, Ken Cho, Yuya Nagasawa, Takashi Konnno, Yoshinori Ito, Yoshio Itsumi, Hideto Oyama
Materials Science and Engineering: A Vol. 594 page： 103-110 2014.1
A review of surface modification of a novel low modulus β-type titanium alloy for biomedical applications Reviewed
Mitsuo Niinomi, Masaaki Nakai, Junko Hieda, Ken Cho, Toshihiro Kasuga, Tomokazu Hattori, Takashi Goto, Takao Hanawa
International Journal of Surface Science and Engineering Vol. 8 ( 2-3 ) page： 138-152 2014
Mechanical properties of biomedical beta-type titanium alloy with rare-earth metal oxide particles formed by rare-metal addition Reviewed
Junko Hieda, Mitsuo Niinomi, Masaaki Nakai, Ken Cho
Supplemental UE: TMS 2014 Conference Proceedings page： 129-135 2014
Functionalization of Multiwalled Carbon Nanotubes by Solution Plasma Processing in Ammonia Aqueous Solution and Preparation of Composite Material with Polyamide 6 Reviewed
Vol. 52 ( 12 ) page： 125101 2013.12
Improvement of Tensile and Fatigue Properties of beta-Titanium Alloy while Maintaining Low Young's Modulus through Grain Refinement and Oxygen Addition Reviewed
Ken Cho, Mitsuo Niinomi, Masaaki Nakai, Junko Hieda, Ryota Kanekiyo
MATERIALS TRANSACTIONS Vol. 54 ( 10 ) page： 2000-2006 2013.10
Effect of Oxide Particles Formed through Addition of Rare-Earth Metal on Mechanical Properties of Biomedical β-Type Titanium Alloy Reviewed
Junko Hieda, Mitsuo Niinomi, Masaaki Nakai, Ken Cho
Materials Transactions Vol. 54 ( 8 ) page： 1361-1367 2013.8
Deformation-induced ω phase in modified Ti-29Nb-13Ta-4.6Zr alloy by Cr addition Reviewed
Qiang Li, Mitsuo Niinomi, Junko Hieda, Masaaki Nakai, Ken Cho
Acta Biomaterialia Vol. 9 ( 8 ) page： 8027–8035 2013.8
Effects of Alloying Elements on the HAp Formability on Ti Alloys after Alkali Treatment Reviewed
Ken Cho, Mitsuo Niinomi, Masaaki Nakai, Junko Hieda, Xiaojie Tao
Materials Transactions Vol. 54 ( 8 ) page： 1295-1301 2013.8
Mechanical properties of a medical beta-type titanium alloy with specific microstructural evolution through high-pressure torsion Reviewed
Hakan Yilmazer, Mitsuo Niinomi, Masaaki Nakai, Ken Cho, Junko Hieda, Yoshikazu Todaka, T. Miyazaki
Materials Science and Engineering: C Vol. 33 ( 5 ) page： 2499-2507 2013.7
Improvement of adhesive strength of segmented polyurethane on Ti-29Nb-13Ta-4.6Zr alloy through H2O2 treatment for biomedical applications Reviewed
Junko Hieda, Mitsuo Niinomi, Masaaki Nakai, Hiroyuki Kamura, Harumi Tsutsumi, Takao Hanawa
Journal of Biomedical Materials Research Part B: Applied Biomaterials Vol. 101B ( 5 ) page： 776-783 2013.7
Heterogeneous grain refinement of biomedical Ti-29Nb-13Ta-4.6Zr alloy through high-pressure torsion Reviewed
Masaaki Nakai, Mitsuo Niinomi, Junko Hieda, Hakan Yilmazer, Yoshikazu Todaka
Scientia Iranica Vol. 20 ( 3 ) page： 1067-1070 2013.6
Development of High Modulus Ti-Fe-Cu Alloys for Biomedical Applications Reviewed
Ken Cho, Niinomi Mitsuo, Masaaki Nakai, Junko Hieda, Yuuki Kawasaki
Materials Transactions Vol. 54 ( 4 ) page： 574-581 2013.3
Enhancement of adhesive strength of hydroxyapatite films on Ti-29Nb-13Ta-4.6Zr by surface morphology control Reviewed
Junko Hieda, Mitsuo Niinomi, Masaaki Nakai, Ken Cho, Tatsuya Gozawa, Hirokazu Katsui, Rong Tu, Takashi Goto
Journal of the Mechanical Behavior of Biomedical Materials Vol. 18 page： 232-239 2013.2
Tensile and Fatigue Properties of Carbon-Solute-Strengthened (α+β)-Type Titanium Alloy Reviewed
Masaaki Nakai, Mitsuo Niinomi, Junko Hieda, Ken Cho, Toshikazu Akahori, Kazuhiro Hayashi, Yoshio Itsumi, Shogo Murakami, Hideto Oyama
Materials Transactions Vol. 54 ( 2 ) page： 169-175 2013.1
Specific characteristics of mechanically and biologically compatible titanium alloy rods for use in spinal fixation applications Reviewed
Kengo Narita, Mitsuo Niinomi, Masaaki Nakai, Junko Hieda, Kazuya Oribe
Materials Letters Vol. 86 page： 178-181 2012.11
Effects of solidification and solution treatment at high temperature on precipitation behavior of β phase of dental casting Au-Ag-Pd alloy Reviewed
Toyohiko Sugimura, Hisao Fukui, Mitsuo Niinomi, Toshikazu Akahori, Masaaki Nakai, Junko Hieda, Yonghwan Kim
The Journal of the Japanese Society for Dental Materials and Devices Vol. 31 ( 6 ) page： 531-537 2012.11
Development of new metallic alloys for biomedical applications Invited Reviewed
Mitsuo Niinomi, Masaaki Nakai, Junko Hieda
Acta Biomaterialia Vol. 8 page： 3888-3903 2012.11
Microstructures and Mechanical Properties of Ternary Ti-10Cr-(V, Fe, Mo) Alloys with Self-tunable Young's Moduli for Biomedical Applications Reviewed
Masaaki Nakai, Mitsuo Niinomi, Junko Hieda, Toshiya Shibata
ISIJ International Vol. 52 ( 9 ) page： 1655-1660 2012.9
Effect of Deformation-Induced omega Phase on the Mechanical Properties of Metastable beta-Type Ti-V Alloys Reviewed
Xingfeng Zhao, Mitsuo Niinomi, Masaaki Nakai, Junko Hieda
Materials Transactions Vol. 53 ( 8 ) page： 1379-1384 2012.8
Optimization of Cr content of metastable β-type Ti-Cr alloys with changeable Young's modulus for spinal fixation applications Reviewed
Xingfeng Zhao, Mitsuo Niinomi, Masaaki Nakai, Junko Hieda, Takuya Ishimoto, Takayoshi Nakano
Acta Biomaterialia Vol. 8 ( 6 ) page： 2392-2400 2012.7
Heterogeneous structure and mechanical hardness of biomedical β-type Ti-29Nb-13Ta-4.6Zr subjected to high-pressure torsion Reviewed
Hakan Yilmazer, Mitsuo Niinomi, Masaaki Nakai, Junko Hieda, Yoshikazu Todaka, Toshikazu Akahori, T. Miyazaki
Journal of the Mechanical Behavior of Biomedical Materials Vol. 10 page： 235-245 2012.6
Preparation and wettability examinations of transparent SiO2 binder-added MgF2 nanoparticle coatings covered with fluoro-alkyl silane self-assembled monolayer Reviewed
Tsuyoshi Murata, Junko Hieda, Nagahiro Saito, Osamu Takai
Applied Optics Vol. 51 ( 13 ) page： 2298-2305 2012.5
Development of thermo-mechanical processing for fabricating highly durable β-type Ti-Nb-Ta-Zr rod for use in spinal fixation devices Reviewed
Kengo Narita, Mitsuo Niinomi, Masaaki Nakai, Junko Hieda, Kazuya Oribe
Journal of the Mechanical Behavior of Biomedical Materials Vol. 9 page： 207-216 2012.5
Beta type Ti-Mo alloys with changeable Young's modulus for spinal fixation applications Reviewed
Xingfeng Zhao, Mitsuo Niinomi, Masaaki Nakai, Junko Hieda
Acta Biomaterialia Vol. 8 ( 5 ) page： 1990-1997 2012.5
Formation of L10-type ordered β' phase in as-solutionized dental Ag-Pd-Au-Cu alloys and hardening behavior Reviewed
Yonghwan Kim, Mitsuo Niinomi, Junko Hieda, Masaaki Nakai, Hisao Fukui
Materials Science and Engineering C Vol. 32 ( 3 ) page： 503-509 2012.4
Young's modulus changeable β-type binary Ti-Cr alloys for spinal fixation applications Reviewed
Xingfeng Zhao, Mitsuo Niinomi, Masaaki Nakai, Junko Hieda
the special volume of "Materials Integration" in Key Engineering Materials Vol. 508 page： 117-123 2012.3
Effect of terminal functional groups of silane layers on adhesion strength between biomedical Ti-29Nb-13Ta-4.6Zr alloy and segment polyurethanes Reviewed
Junko Hieda, Mitsuo Niinomi, Masaaki Nakai, Hiroyuki Kamura, Harumi Tsutsumi, Takao Hanawa
Surface and coatings technology Vol. 206 ( 13 ) page： 3137-3141 2012.2
Microstructural change of β' phase and hardness change in as-solutionized dental Ag-20Pd-12Au-14.5Cu alloy Reviewed
Yonghwan Kim, Mitsuo Niinomi, Junko Hieda, Masaaki Nakai, Hisao Fukui
the special volume of "Materials Integration" in Key Engineering Materials Vol. 508 page： 166-171 2012.2
Difference of Microstructure and Fatigue Properties between Forged and Rolled Ti-6Al-4V Reviewed
Yoon Seok Lee, Mitsuo Niinomi, Masaaki Nakai, Junko Hieda, Takashi Maeda, Yoshihisa Shirai, Ikuhiro Inagaki
the special volume of "Materials Integration" in Key Engineering Materials Vol. 508 page： 161-165 2012.2
Microstructure and mechanical properties of a biomedical β- type titanium alloy subjected to severe plastic deformation after aging treatment Reviewed
Hakan Yilmazer, Miitsuo Niinomi, Masaaki Nakai, Junko Hieda, Toshikazu Akahori, Yoshikazu Todaka
the special volume of "Materials Integration" in Key Engineering Materials Vol. 508 page： 152-160 2012.2
Effects of Solidification Structure and Heat Treatment on Hardness of Commercial Dental Casting Au-Ag-Pd Alloys Reviewed
Toyohiko Sugimura, Hisao Fukui, Kentaro Kaikawa, Mitsuo Niinomi, Toshikazu Akahori, Masaaki Nakai, Junko Hieda
The Journal of the Japanese Society for Dental Materials and Devices Vol. 30 ( 6 ) page： 410-417 2011.11
Corrosion resistance and chemical stability of super-hydrophobic film deposited on magnesium alloy AZ31 by microwave plasma-enhanced chemical vapor deposition Reviewed
Takahiro Ishizaki, Junko Hieda, Nagahiro Saito, Naobumi Saito, Osamu Takai
Electrochem. Acta Vol. 55 page： 7094-7101 2010
Solution Plasma Surface Modification for Nanocarbon-Composite Materials Reviewed
Junko Hieda, Tatsuru Shirafuji, Yohei Noguchi, Nagahiro Saito, and Osamu Takai
Vol. 73 ( 12 ) page： 938-942 2009
*Synthesis Process of Gold Nanoparticles in Solution Plasma Reviewed
N. Saito, J. Hieda and O. Takai
Thin Solid Films Vol. 518 page： 912–917 2009
*Size-regulated Gold Nanoparticles Fabricated by a Discharge in Reverse Micelle Solutions Reviewed
J. Hieda, N. Saito, O. Takai
Surface & Coatings Technology Vol. 202 page： 5343-5346 2008
*Exotic shapes of gold nanoparticles synthesized using plasma in aqueous solution Reviewed
J. Hieda, N. Saito, O. Takai
The Journal of Vacuum Science and Technology A Vol. 26 page： 854-856 2008
*Reaction Dynamics for Gold Nanoparticles Synthesis in Solution Plasma Reviewed
J. Hieda, N. Saito, O. Takai
Mater. Res. Soc. Symp. Proc. Vol. 1056 page： 1056-HH03-39 2008
Atmospheric plasma-calcination of mesoporous tungsten oxide utilizing Reviewed
P. Baroch, J. Hieda, N. Saito, O. Takai
Thin Solid Films Vol. 515 page： 4905–4908 2007
*自己組織化単分子膜を利用した選択的無電解めっきによるメタルパターンの作製とポリマー上への転写 Reviewed
稗田純子, 齋藤永宏, 太田理一郎, 高井治
表面技術 Vol. 56 page： 113-117 2005
Surface potential reversibility of an amino-terminated self-assembled monolayer based on nanoprobe chemistry Reviewed
N. Saito, S.H. Lee, T. Ishizaki, J. Hieda, H. Sugimura, O. Takai
J. Phys. Chem. B. Vol. 109 page： 11602-11605 2005
Fabrication of a built-in patterned metal microstructure on a polymer substrate using a microstructured organic monolayer template Reviewed
N. Saito, J. Hieda, O. Takai
Electrochem. Solid-State Lett. Vol. 7 page： C140-C141 2005
DLCの基礎と応用展開・BドープDLCの生体親和性
稗田純子（ Role： Contributor）
シーエムシー出版 2016.7 （ ISBN:978-4-7813-1167-8 ）
バイオマテリアル研究の最前線・2-3-4 生体用β型チタン合金の力学的特性に及ぼすTiBの影響
稗田純子, 新家光雄（ Role： Joint author）
日本金属学会 2014.10
バイオマテリアル研究の最前線・4-4-1溶体化処理を施したAg–Pd–Au–Cu 合金中におけるL10型β′規則相の形成と硬化挙動
稗田純子, 新家光雄（ Role： Joint author）
日本金属学会 2014.10
Chapter 20 Advances in Biomaterials Science and Biomedical Applications
Junko Hieda, Mitsuo Niinomi, Masaaki Nakai, Ken Cho（ Role： Joint author）
InTech 2013.3
Ice Adhesion Strength and Freezing Time on Surfaces of Aluminum Alloy Modified with Various Functional Groups International conference
J. Hieda, A. Mori, R. Funahashi, S. Yang
The 3rd Materials Research Meeting/ The 24th IUMRS-International Conference in Asia (MRM2023/IUMRS-ICA2023 Grand Meeting) 2023.12.12
Development of titanium-magnesium alloy films for biomedical applications Invited International conference
Junko Hieda
The Taiwan Association for Coating and Thin Film Technology (TACT) 2023 International Thin Films Conference 2023.11.13
液中プラズマを用いた高分子合成における硫酸添加の影響
富田恵人、稗田純子
第72回高分子討論会 2023.9.26 公益社団法人 高分子学会
水素化アモルファス炭素膜を用いた高耐久性難雪氷接着表面の開発
森飛貴、稗田純子
第70回応用物理学会春季学術講演会 2023.3.17 応用物理学会
医療用Ti-Ca合金膜の構造解析と生体適合性評価
黒柳洋人、小河優玖、金子真大、井藤彰、稗田純子
日本金属学会2023年春期(第172回)講演大会 2023.3.7
液中プラズマを用いた高分子合成の試み Invited
稗田純子
静電気学会 放電プラズマによる水処理研究委員会 2022.12.20 静電気学会 放電プラズマによる水処理研究委員会
水素化アモルファス炭素膜を用いた高耐久性難雪氷接着表面の開発
森飛貴、稗田純子
令和４年度表面技術若手研究者・技術者研究交流発表会 2022.12.7
液中プラズマを用いた高分子合成における放電形態の影響と重合体の構造推定
平野 学, 稗田純子
第69回応用物理学会春季学術講演会 2022.3.23 応用物理学会
生体内等の特殊環境下で使用する機能性材料の開発
稗田純子
未来のくらしと水の科学研究会 第3回定例研究会 2021.12.23 未来のくらしと水の科学研究会
一元高周波マグネトロンスパッタリングによるTi–Mg合金薄膜の作製と生体適合性評価
可児誠太郎, 稗田純子
日本金属学会2021年春期(第168回)講演大会 2021.3.16
高周波マグネトロンスパッタ法による生体適合性Ti–Ca膜の作製と評価
加藤敦士, 稗田純子
日本金属学会2021年春期(第168回)講演大会 2021.3.16
電子スピン共鳴法を用いた希硫酸中におけるヒドロキシラジカル・硫酸イオンラジカルの反応機構解明
村田菜緒, 立花孝介, 金澤誠司, 高橋克幸, 稗田純子, 竹内希, Oi Lun Li
2021年度静電気学会春期講演会 2021.3.2
生体内等の特殊環境下で使用する機能性材料の開発をめざして Invited
稗田純子
日本表面真空学会 スパッタリングおよびプラズマプロセス技術部会 第165回定例研究会 2021.1.25
負極性パルスアルゴンプラズマにより生成された硫酸・亜硫酸イオンラジカルの電子スピン共鳴法による測定
立花孝介, 村田菜緒, 金澤誠司, 高橋克幸, 稗田純子, 竹内希, Oi Lun Li
第44回静電気学会全国大会 2020.9.24
液中プラズマを用いた高分子合成における放電形態の影響
平野 学, 稗田純子
第81回応用物理学会秋季学術講演会
マイクロ波プラズマ化学気相成長法で作製したアモルファス炭素膜におけるタンパク質の吸着量評価
久保田雄大, 稗田純子
表面技術協会 第141回講演大会
各種官能基で修飾したアルミニウム合金表面における氷の接着強度評価
舟橋良哉, 稗田純子
表面技術協会 第141回講演大会
Water Freezing Behavior on Aluminum Alloy Modified with Various Functional Groups Invited International conference
Junko Hieda
Materials Research Meeting 2019 (MRM2019)
生体内や低温環境など特殊環境下で使用する機能性材料の開発 Invited
稗田純子
日本学術振興会 水の先進理工学第183委員会 第51回研究会
液中プラズマを用いた高分子合成の試み
中嶋 仁, 稗田純子
第68回高分子討論会
各種官能基で修飾したアルミニウム合金表面における結氷挙動
楊爍睿, 八尾健一朗, 牛本卓二, 稗田純子
表面技術協会第139回講演大会
材料の熱特性と触り心地との相関関係
疋田賢吾, 稗田純子
第13回日本感性工学会春季大会
樹脂材料の表面粗さと快/不快の相関関係
井上恭輔, 稗田純子
第13回日本感性工学会春季大会
ソリューションプラズマを用いた高分子合成の試み
服部達也, 稗田純子
表面技術協会 第137回講演大会
多種類のガスに応答するポルフィリン・ナノ粒子複合膜の開発
松浦伸悟, 稗田純子
表面技術協会 第137回講演大会
ソリューションプラズマを用いた新材料創成 Invited
稗田純子, 上野智永, 齋藤永宏
2017年真空・表面科学合同講演会：第37回表面科学学術講演会・第58回真空に関する連合講演会
デュアルマイクロ波プラズマ源CVDにより作製した窒化炭素膜の評価 Invited
稗田純子, 上野智永, 齋藤永宏
第63回 CVD研究会 (第27回夏季セミナー)
種々の官能基で修飾したチタン表面の骨形成能評価
坂口晃，中野雅之，稗田純子，赤坂大樹，大竹尚登
2015年度精密工学会春季大会学術講演会
Biocompatibility of Ti-Mg alloys fabricated by magnetron sputtering International conference
Junko Hieda, Mitsuo Niinomi, Masaaki Nakai, Ken Cho
The 10th Anniversary Asian-European International Conference on Plasma Surface Engineering (AEPSE2015)
Ti-Mg合金薄膜におけるMg濃度とリン酸カルシウム形成能との関係
稗田純子，新家光雄，仲井正昭，趙研
2015年度精密工学会秋季大会学術講演会
Evaluation of adhesive strength between Ti-29Nb-13Ta-4.6Zr alloy and sol-gel fabricated hydroxyapatite films International conference
Junko Hieda, Mitsuo Niinomi, Masaaki Nakai, Ken Cho
4th Asian Symposium on Materials and Processing (ASMP2015)
Evaluation of hard-tissue compatibility of Ti-Mg alloys fabricated by magnetron sputtering International conference
Junko Hieda, Mitsuo Niinomi, Masaaki Nakai, Ken Cho
7th International Symposium on Advanced Plasma Science and Its Applications for Nitrides and nanomaterials/ 8th International Conference on Plasma-nano technology & Science (ISPlasma2015/IC-PLANTS2015)
Biomedical surface modification of beta-type titanium alloy for implants with surface morphology control Invited International conference
Junko Hieda, Mitsuo Niinomi, Masaaki Nakai, Ken Cho, Takao Hanawa, Hirokazu Katsui, Rong Tu, Takashi Goto
The 15th International Symposium on Biomimetic Materials Processing (BMMP15)
Ti-Mg合金におけるMg濃度と擬似体液へのMgイオンの溶出量との関係
稗田純子，新家光雄，仲井正昭，趙研，齊藤今朝美
平成26年春期第63回日本歯科理工学会学術大会
擬似生体環境下におけるハイドロキシアパタイト膜の密着性評価
稗田純子，新家光雄，仲井正昭，趙研，松原綾香
日本金属学会2014春期（第154回）講演大会
生体用β型チタン合金上に作製したナノ微細構造膜と医療用高分子との密着性評価
稗田純子，新家光雄，仲井正昭，趙研，塙隆夫
第12 回日本金属学会東北支部研究発表大会
Improvement of adhesive strength between Ti-29Nb-13Ta-4.6Zr alloy with anodic oxide nanostructures and segmented polyurethane coating International conference
Junko Hieda, Mitsuo Niinomi, Masaaki Nakai, Ken Cho, Tomoyoshi Mohri, Takao Hanawa
International Symposium on EcoTopia Science 13 (ISETS'13) and The 4th International Symposium on Advanced Materials Development and Integration of Novel Structured Metallic and Inorganic Materials (AMDI-4)
陽極酸化による微細構造をもつβ型チタン合金上に作製した医療用高分子膜の密着強度
稗田純子，新家光雄，仲井正昭，趙研，塙隆夫
第23回日本MRS年次大会
Biomedical polymer surface modification of beta-type titanium alloy for implants through anodic oxide nanostructures Invited International conference
Junko Hieda, Mitsuo Niinomi, Masaaki Nakai, Ken Cho, Tomoyoshi Mohri, Takao Hanawa
THERMEC' 2013 (International Conference on Processing & Manufacturing of Advanced Materials)
高生物学的生体適合性を有する生体用チタン合金の開発
稗田純子，新家光雄，仲井正昭，趙研，齊藤今朝美，塙隆夫
表面技術協会関東支部86回講演会
Ti-Mg合金における疑似体液への各種金属イオンの溶出量
稗田純子，新家光雄，仲井正昭，趙研，齊藤今朝美
第35回日本バイオマテリアル学会大会
ナノ微細構造を利用したTi-29Nb-13Ta-4.6Zr合金と医療用高分子膜との密着性改善
稗田純子，新家光雄，仲井正昭，趙研，塙隆夫
ナノ微細構造を利用したTi-29Nb-13Ta-4.6Zr合金と医療用高分子膜との密着性改善
高温溶体化処理を施した銀パラジウム金銅合金における銅の濃度と微細組織および力学的特性との関係
稗田純子，新家光雄，仲井正昭，趙研，金容煥，福井壽男
平成25年度秋期第62回日本歯科理工学会学術講演会
擬似体液浸漬試験によるチタン-マグネシウム合金のハイドロキシアパタイト形成能の評価
稗田純子，新家光雄，仲井正昭，趙研，齊藤今朝美
日本金属学会2013秋期（第153回）大会
各種表面処理を施したβ型チタン合金へのハイドロキシアパタイト膜の密着性評価
稗田純子，新家光雄，仲井正昭，趙研，且井宏和，塗溶，後藤孝
粉体粉末冶金協会 平成25年度春季大会(第111回講演大会)
DCマグネトロンスパッタリング法により作製したTi-Mg膜における生理食塩水へのTiおよびMgの溶出量
稗田純子，新家光雄，仲井正昭，趙研，齊藤今朝美
第125回金研所内講演会
非平衡プロセスによるチタン-マグネシウム合金の作製と生理食塩水への溶出量評価
稗田純子，新家光雄，仲井正昭，趙研，齊藤今朝美
日本金属学会2013春期（第152回）大会
Mechanical properties of biomedical β-type titanium alloy with yttrium oxide particles formed by yttrium addition International conference
Junko Hieda, Mitsuo Niinomi, Masaaki Nakai, Ken Cho
TMS 2014 143rd Annual Meeting & Exhibition
生体用高分子修飾β型チタン合金の開発とその接着性評価
稗田純子，新家光雄，仲井正昭, 趙研，堤晴美，塙隆夫
日本バイオマテリアル学会シンポジウム2012
Effect of oxide particles formed through addition of rare-earth metal on mechanical properties of biomedical β-type titanium alloy International conference
Junko Hieda, Mitsuo Niinomi, Masaaki Nakai, Ken Cho
The 5th International Symposium on Designing, Processing and Properties of Advanced Engineering Materials and The 3rd International Symposium on Advanced Materials Development and Integration of Novel Structural Metallic and Inorganic Materials (ISAEM-2012/AMDI-3)
Fabrication of β-type titanium alloy with hard-tissue compatibility through HAp deposition by MOCVD method International conference
Junko Hieda, Mitsuo Niinomi, Masaaki Nakai, Ken Cho, Tatsuya Gozawa, Hirokazu Katsui, Rong Tu, Takashi Goto
表面処理を施した生体用β型チタン合金の表面形状とHAp膜密着性への影響
稗田純子，新家光雄，仲井正昭，趙研，且井宏和，塗溶，後藤孝
日本金属学会2012年秋期（第151回）大会
Enhancing biocompatibility of a β-type titanium alloy by HAp film coating by MOCVD and evaluation of its mechanical biocompatibility International conference
The 9th World Biomaterials Congress, 1-5th June (presentation:3th June) 2012
表面粗さを制御した生体用β型チタン合金へのMOCVD-HAp膜の密着性評価
稗田純子，新家光雄，仲井正昭，且井宏和, 塗溶, 後藤孝
軽金属学会第122回春期大会
希土類金属添加生体用型チタン合金における酸化物粒子析出と力学的特性
稗田純子, 新家光雄, 仲井正昭, 永井茂樹
日本金属学会 2012年春期講演(第150回)大会
Mechanical and adhesive properties of hydroxyapatite films pepared on Ti-29Nb-13Ta-4.6Zr alloy
Junko Hieda, Mitsuo Niinomi,Masaaki Nakai, Kazumi Saito, Tu Rong and Takashi Goto
International Symposium of Materials Integration In conjunction with The 2nd International Symposium on Advanced Synthesis and Processing Technology for Materials (ASPT2011), KINKEN-WAKATE 2011
MOCVD法によるTNTZ表面へのHAp膜の合成と生体適合性評価
稗田純子, 新家光雄, 仲井正昭, 斉藤壱実, 後藤 孝, 塗 溶
第33回日本バイオマテリアル学会大会
MOCVD法によるTi-29Nb-13Ta-4.6Zr表面へのハイドロキシアパタイト膜の合成と生体適合性評価
稗田純子, 新家光雄, 仲井正昭, 斉藤壱実, 後藤 孝, 塗 溶
軽金属学会第121回秋期春期大会
生体用高分子/Ti-29Nb-13Ta-4.6Zr合金界面における接着性の改善
稗田純子, 新家光雄, 仲井正昭, 堤 晴美, 嘉村浩之, 塙 隆夫
2011年秋期大会(第149回)日本金属学会講演大会
生体用β型チタン合金/高分子接着性へのシランカップリング剤官能基の影響
稗田純子, 新家光雄, 仲井正昭, 嘉村浩之, 堤 晴美, 塙 隆夫
第58回日本歯科理工学会学術講演会
ポーラスチタン/生分解性高分子コンポジット材料の作製と力学的特性評価
稗田純子, 新家光雄, 仲井正昭
平成23年度粉体粉末冶金協会秋季大会
Fabrication of biofunctionalized Ti-2.9Nb-14Ta-Zr alloy with biocompatible segment polyurethane coating International conference
Junko Hieda, Mitsuo Niinomi, Masaaki Nakai, Hiroyuki Kamura, Harumi Tsutsumi and Takao Hanawa
Workshop on Materials Science in Tianjin University Day, Tohoku University, Japan and Tianjin University
セラミックス粒子添加による生体用β型チタン合金の力学的特性の向上
稗田純子, 新家光雄, 仲井正昭, 宋 秀, 永井茂樹
日本鉄鋼協会第162回秋季講演大会
Biocompatible -type titanium alloy with hydroxyapatite surface prepared by MOCVD method Invited International conference
Reduction Rate of Pd Nanoparticles Synthesis Process in Solution Plasma International conference
2009 MRS Fall Meeting
ソリューションプラズマによるPdナノ粒子の合成
稗田純子、齋藤永宏、高井 治
Solution plasma fabrication of Au/Pt bimetallic nanoparticles International conference
International Symposium on Plasma Chemistry19 (ISPC19)
XAFS Analysis of Gold Nanoparticle Synthesized by Solution Plasma Process International conference
The 9th Korea-Japan Workshop
Effect of Nano-Bubbles on Generation of Solution Plasma, 22nd Symposium on Plasma Science for Materials International conference
22nd Symposium on Plasma Science for Materials (SPSM-22)
Fabrication of Cu Microstructure on a Polymer Sheet Using Nanoimprint Lithography
5th International Symposium on Biomimetic Materials Processing (BMMP-5)
Site-selective Deposition of Metal onto Micro Structured Self-assembled Monolayer and Their Application International conference
Frontiers of Surface and Interface Science and Engineering 2004 (FSISE 2004)
Grant number：23K04415 2023.4 - 2026.3
科学研究費助成事業 基盤研究(C)
稗田 純子
Authorship：Principal investigator
Grant amount：\4810000 （ Direct Cost: \3700000 、 Indirect Cost：\1110000 ）
骨折固定具，人工関節や歯科インプラントに使用されているTiおよびTi合金よりも骨形成能に優れる新規医療用Ti材料の開発を目指し，従来の溶解プロセスでは作製できないCaとTiを合金化したTi合金を作製し，細胞接着性タンパク質の吸着や骨芽細胞の接着・増殖挙動などを調査する。さらに，材料からのCaの溶出による骨形成促進を狙って，作製条件等を制御して複合体の作製を試み，その微細組織とCaの溶出量，骨形成能との関係を調査する。
Grant number：20K05130 2020.4 - 2023.3
Grants-in-Aid for Scientific Research Grant-in-Aid for Scientific Research (C)
Hieda Junko
Authorship：Principal investigator
Grant amount：\4290000 （ Direct Cost: \3300000 、 Indirect Cost：\990000 ）
In this study, we attempted to prepare Ti-Mg and Ti-Ca alloy films by alloying Ti with bone-containing elements such as Ca and Mg, to develop new medical Ti materials with better bone formation ability than conventional Ti and Ti alloys. We succeeded in controlling the composition of the alloy films and clarified the relationship between the Ca and Mg concentrations and the crystal structure, surface properties, and biocompatibility of the fabricated alloy films; the addition of Ca or Mg resulted in faster formation of hydroxyapatite in simulated body fluids compared to Ti.
Preparation of high durable super-hydrophobic composite films by microwave plasma CVD
Grant number：19K05037 2019.4 - 2022.3
Grants-in-Aid for Scientific Research Grant-in-Aid for Scientific Research (C)
Takai Osamu
Authorship：Coinvestigator(s)
In order to improve the durability of the superhydrophobic film, the microstructure necessary for the superhydrophobicity was prepared with silica particles and film, and its surface was coated by hydrophobic hard amorphous carbon to fabricate a highly durable superhydrophobic composite film with excellent strength and wear resistance.
Systematization of Adamant Thin Films and Fabrication of High-Functional Mechanical Coatings
Grant number：16H02406 2016.4 - 2020.3
Ohtake Naoto
Authorship：Coinvestigator(s)
This research aims to develop novel mechanical coating materials consisting of carbon, boron and nitrogen, which is named “adamant” thin film coatings. Ternary diagram was described using measured data set of mechanical properties of various adamant films, and systematization of adamant films is performed on the diagram.
Carbon contents has significant influence for the mechanical properties of adamant films. Nanoindentation hardness of the film sharply decreased when the carbon content exceeds 50at.%. In contrast, the thermal resistivity of the film was improved by decreasing the carbon content. It is interesting result that the wear resistance improves when small amount of B was added in DLC film. Moreover, adhesion of platelet was suppressed on the B containing amorphous carbon films. These results lead us to open novel mechanical coatings using adamant materials.
Fabrication of titanium/amorphous carbon micropattern which promotes bone formation
Grant number：16K18256 2016.4 - 2019.3
Hieda Junko
Authorship：Principal investigator
Grant amount：\4160000 （ Direct Cost: \3200000 、 Indirect Cost：\960000 ）
In this study, in order to obtain good adhesion strength between Ti surface and new bone, Ti/amorphous carbon micropattern was fabricated since amorphous carbon has affinity for osteoblast and Ti has affinity for bone. To fabricate Ti/amorphous carbon micropattern, amorphous carbon films was deposited on Ti substrates by plasma enhanced chemical vapor deposition (CVD). Furthermore, it was immersed in an aqueous solution of fibronectin, which is a cell adhesion protein, and its adsorption was investigated. It was found that vacuum ultraviolet light irradiation increased the adsorption amount of fibronectin to the amorphous carbon film.
表面特性制御による骨形成を促進あるいは抑制するチタン合金表面の創製
2014.4 - 2016.3
科学研究費補助金 若手研究(B)
稗田純子
Authorship：Principal investigator
Physical Chemistry 3 with Exercises
2021
First Year Seminar A
2021
Interface Chemistry
2021
Exercises on Physical Chemistry
2021
Advanced Experiments and Exercises on Materials Chemistry 2
2021
Advanced Experiments and Exercises on Materials Chemistry 1
2021
Seminars on Materials Chemistry 1C
2021
Seminars on Materials Chemistry 1A
2021
Materials Interface Engineering
2021
Seminars on Materials Chemistry 1D
2021
Seminars on Materials Chemistry 1B
2021
卒業研究B
2021
卒業研究A
2021
学生実験2
2021
先端物理化学演習
2021
マテリアル工学概論
2021
マテリアル工学演習
2021
First Year Seminar A
2020
Exercises on Physical Chemistry
2020
Physical Chemistry 3 with Exercises
2020
先端物理化学演習
2020
マテリアル工学概論
2020
マテリアル工学演習
2020
学生実験2
2019
物理化学演習
2019
基礎セミナー
2019
界面化学
2019
先端物理化学演習
2019
マテリアル工学概論
2019
先端物理化学演習
2018
材料工学実験及び演習１（テーマ2）
2018
マテリアル工学概論
2018
基礎セミナー
2018
界面材料工学
2018
材料工学実験及び演習2
2018
材料工学実験基礎
2017
材料工学実験及び演習2
2017
界面材料工学
2017
界面化学
2017
材料工学実験及び演習１（テーマ2）
2017
マテリアル工学科概論
2017
先端物理化学演習
2017
マテリアル工学特論2
2016
材料工学実験基礎
2016
材料工学実験及び演習2
2016
プラズマ材料工学特論
2016
材料物理学演習
2016
材料工学実験及び演習１
2016
物理工学科概論
2016
界面材料工学
2016
先端材料
2023.4 - 2023.8 （Aichi Institute of Technology）
先端材料
2022.4 - 2022.8 （Aichi Institute of Technology）
先端材料
2021.4 - 2021.8 （Aichi Institute of Technology）
先端材料
2020.4 - 2020.8 （Aichi Institute of Technology）
先端材料
2019.4 - 2019.8 （Aichi Institute of Technology）
先端材料
2018.4 - 2018.8 （Aichi Institute of Technology）
先端材料
2017.4 - 2018.8 （Aichi Institute of Technology）
スーパーサイエンスハイスクール(SSH) での研究活動への協力(三重県立四日市高校)
Role(s)：Lecturer
2019.4 - 2019.8
