研究者詳細 - 齋藤　永宏

論文 - 齋藤　永宏

分割表示 367 件中 61 - 80 件目／全件表示 >>

N-Doped few-layer graphene encapsulated Pt-based bimetallic nanoparticles: Via solution plasma as an efficient oxygen catalyst for the oxygen reduction reaction

Phan P.Q., Naraprawatphong R., Pornaroontham P., Park J., Chokradjaroen C., Saito N.

Materials Advances 2 巻 ( 1 ) 頁： 322 - 335 2021年

記述言語：英語掲載種別：研究論文（学術雑誌）出版者・発行元：Materials Advances

N-Doped few-layer graphene encapsulated Pt-based bimetallic nanoparticles were successfully synthesized via the solution plasma (SP) method. This synthesis strategy can be achieved in one pot by using only pure dimethylformamide (DMF) as the reaction solution at room temperature and atmospheric pressure. The structural analyses exhibited a fine core-shell structured nanoparticle (2-4 nm), which had Pt and Pt-based bimetallic nanoparticles as a core and N-doped few-layer graphene (NFG), having 2-4 layers, as a shell. Pt-based bimetallic cores (i.e., PtAu, PtAg, and PtPd) were varied depending on the metal electrodes used in the SP process. The electrocatalytic activity toward the oxygen reduction reaction (ORR) of the obtained samples in an acidic solution was found to be acceptable, while possessing excellent durability, compared to those of the commercial carbon-supported Pt catalyst. The effective ORR activity was possibly attributed to the synergistic effect of the Pt-based bimetallic core and N-doped graphene shell which contained high amounts of pyridinic-N and quaternary-N. The results in a single fuel cell test expressed the superiority of our SP-derived sample in the fuel cell performances to commercial Pt/C. This study not only proposed potential alternative ORR catalysts with acceptable electrocatalytic activity and high durability but also provided guidelines for the facile synthesis of carbon-based core-shell nanostructured materials with low chemical use via the SP process. This journal is

DOI： 10.1039/d0ma00718h

Natural Self-Confined Structure Effectively Suppressing Volume Expansion toward Advanced Lithium Storage 査読有り国際共著

Zhang Y., Huang J., Liao Z., Hu A., Li X., Saito N., Zhang Z., Yang L., Hirano S.I.

ACS Applied Materials and Interfaces 2021年

記述言語：英語掲載種別：研究論文（学術雑誌）出版者・発行元：ACS Applied Materials and Interfaces

Volume expansion hinders conversion-type transition-metal oxides (TMOs) as potential anode candidates for high-capacity lithium-ion batteries. While nanostructuring and nanosizing have been employed to improve the cycling stability of TMOs, we show here that both high initial Coulombic efficiency (ICE) and stable cycling reversibility are achieved in the layered compound Li0.9Nb0.9Mo1.1O6 (L0.9NMO) by inherent properties of the bulk crystal structure. In this model, MoO6 octahedra as active centers react with lithium ions and endow capacity, while a grid composed of NbO6 octahedra effectively suppresses the volume expansion, enhances the conductivity, and supports the structural skeleton from collapse. As a result, bulk L0.9NMO not only delivers a high discharge capacity of 1128 mA h g-1 at 100 mA g-1 with a considerable ICE of 87% but also exhibits long cycling stability and good rate performance (339 mA h g-1 after 500 cycles at 1 A g-1 with an average Coulombic efficiency approaching 100%). The self-confined structure provides a competitive strategy for stable conversion-type lithium storage.

DOI： 10.1021/acsami.1c02269

Safe, superionic conductive and flexible “polymer-in-plastic salts” electrolytes for dendrite-free lithium metal batteries

Liao Z., Huang J., Chen W., Saito N., Zhang Z., Yang L., Hirano S.i.

Energy Storage Materials 33 巻頁： 442 - 451 2020年12月

記述言語：英語掲載種別：研究論文（学術雑誌）出版者・発行元：Energy Storage Materials

Solid polymer electrolytes (SPEs) garner tremendous attention for both enabling higher energy density battery chemistry and alleviating the safety concerns of liquid electrolytes, but the practical utilizations of SPEs are severely hindered by the limited room temperature ionic conductivity, low transference number and huge interface impedance. Unlike the polymer chain movement in traditional SPEs, in the present work, we develop novel “polymer-in-plastic salts” electrolytes (PIPSEs) via a high weight ratio of plastic salts to polymer in which polymer just function as framework so that non-flammable, superionic conductive and flexible SPEs can be obtained. Also, the high content of plastic salts in PIPSEs can wet electrodes and form compatible solid electrolyte interface (SEI) with lithium metal. As a consequence, solid-state dendrite-free symmetric Li cells with PIPSEs show ultralong cycle life over 1000 h under up to 2.0 mA cm−2 and Li/LiFePO4 and high-voltage Li/LiNi0.6Co0.2Mn0.2O2 cells utilizing above PIPSEs exhibit excellent cycle performance and appealing rate performance. It is anticipated that our work provides a new strategy for the next-generation solid-state batteries.

DOI： 10.1016/j.ensm.2020.09.003

Single-walled carbon nanotubes wrapped by cationic nitrogen-doped carbon for electrocatalytic applications 査読有り国際共著

Chae S., Phan P.Q., Panomsuwan G., Bratescu M.A., Hashimoto T., Teshima K., Saito N.

ACS Applied Nano Materials 3 巻 ( 10 ) 頁： 10183 - 10189 2020年10月

担当区分：最終著者,　責任著者記述言語：英語掲載種別：研究論文（学術雑誌）出版者・発行元：ACS Applied Nano Materials

The exploration of novel carbon material systems has emerged as a promising strategy for yielding unique and unconventional functional properties. In this study, a cationic nitrogen-doped carbonwrapped single-walled carbon nanotube (CN-C@SWCNT) was synthesized for the first time via solution plasma (SP) by using an aniline aqueous solution with the SWCNT dispersion under ambient conditions. The reactive species produced from SP led to the formation of cationic nitrogendoped carbon (CN-C) completely wrapped around SWCNT. Raman spectroscopy, electron diffraction, and X-ray photoelectron spectroscopy confirmed the presence of cationic nitrogen. CN-C@SWCNT exhibited an excellent electrical conductivity of 120.30 S cm-1. Room-temperature halleffect measurements revealed p-type semiconducting behavior for CN-C@ SWCNT, with a carrier concentration of 4.6 × 1020 cm-3. The electrical conductivity and carrier concentration of p-type CN-C@SWCNT were greater than those reported previously for carbon-based materials. The high electrical properties of CN-C@SWCNT were synergistically related to a conducting bridge between CN-C and SWCNT conducting domains and the presence of doped cationic nitrogen. The SP-synthesized CN-C@SWCNT demonstrates immense potential as an emerging class of p-type carbon materials in advanced electrocatalytic applications.

DOI： 10.1021/acsanm.0c02164

In situ synthesis of copper nanoparticles encapsulated by nitrogen-doped graphene at room temperature via solution plasma

Phan P.Q., Chae S., Pornaroontham P., Muta Y., Kim K., Wang X., Saito N.

RSC Advances 10 巻 ( 60 ) 頁： 36627 - 36635 2020年10月

記述言語：英語掲載種別：研究論文（学術雑誌）出版者・発行元：RSC Advances

Metal-carbon core-shell nanostructures have gained research interest due to their better performances in not only stability but also other properties, such as catalytic, optical, and electrical properties. However, they are limited by complicated synthesis approaches. Therefore, the development of a simple method for the synthesis of metal-carbon core-shell nanostructures is of great significance. In this work, a novel Cu-core encapsulated by a N-doped few-layer graphene shell was successfully synthesized in a one-pot in-liquid plasma discharge, so-called solution plasma (SP), to our knowledge for the first time. The synthesis was conducted at room temperature and atmospheric pressure by using a pair of copper electrodes submerged in a DMF solution as the precursor. The core-shell structure of the obtained products was confirmed by HR-TEM, while further insight information was explained from the results of XRD, Raman, and XPS measurements. The obtained Cu-core encapsulated by the N-doped few-layer graphene shell demonstrated relatively high stability in acid media, compared to the commercial bare Cu particles. Moreover, the stability was found to depend on the thickness of the N-doped few-layer graphene shell which can be tuned by adjusting the SP operating conditions. This journal is

DOI： 10.1039/d0ra07162e

Solution plasma: new synthesis method of N-doped carbon dots as ultra-sensitive fluorescence detector for 2,4,6-trinitrophenol 査読有り国際共著

Kim K., Chokradjaroen C., Saito N.

Nano Express 1 巻 ( 2 ) 2020年9月

記述言語：英語掲載種別：研究論文（学術雑誌）出版者・発行元：Nano Express

Herein, we report the synthesis of nitrogen-doped carbon dots (NCDs) through solution plasma (SP) for the first time. The SP method occurs a rapid dissociation of molecules, such as organic compounds, caused by an electrical discharge between electrodes immersed in a solution. The dissociation can result in the creation of various radicals such as ·C2, ·CN, and ·H which enable the rapid synthesis of carbon dots (CDs). The unique reaction of radicals allowed the formation of CDs with high N concentration and functionalization of the surface in a short time. In this study, by using the SP method, a very fine NCDs with size of 6 nm were synthesized from a pyridine/water mixture in just 10 min. Bright blue fluorescence (410 nm) with a high quantum yield (61%) was observed due to the high N concentration and the surface passivation. From the potential application point of view, the synthesized NCDs showed an excellent detection property for 2,4,6-trinitrophenol (TNP) by fluorescence quenching effect. It was due to rich amino-functional groups which act as a reaction pathway to TNP. This phenomenon was caused by the synergetic effect of a photo-induced electron transfer with the assistance of proton transfer-assisted electron transfer.

DOI： 10.1088/2632-959X/abb9fa

Effect of electrical discharge plasma on cytotoxicity against cancer cells of N,O-carboxymethyl chitosan-stabilized gold nanoparticles

Chokradjaroen C., Rujiravanit R., Theeramunkong S., Saito N.

Carbohydrate Polymers 237 巻 2020年6月

記述言語：英語掲載種別：研究論文（学術雑誌）出版者・発行元：Carbohydrate Polymers

Electrical discharge plasma in a liquid phase can generate reactive species, e.g. hydroxyl radical, leading to rapid reactions including degradation of biopolymers. In this study, the effect of plasma treatment time on physical properties and cytotoxicity against cancer cells of N,O-carboxymethyl chitosan-stabilized gold nanoparticles (CMC-AuNPs) was investigated. AuNPs were synthesized by chemical reduction of HAuCl4 in 2 % CMC solution to obtain CMC-AuNPs, before being subjected to the plasma treatment. Results showed that the plasma treatment not only led to the reduction of hydrodynamic diameters of CMC-AuNPs from 400 nm to less than 100 nm by the plasma-induced degradation of CMC but also provided the narrow size distribution of AuNPs having diameters in the range of 2–50 nm, that were existing in CMC-AuNPs. In addition, the plasma-treated CMC-AuNPs could significantly reduce the percentage of cell viability of breast cancer cells by approximately 80 % compared to the original CMC and CMC-AuNPs.

DOI： 10.1016/j.carbpol.2020.116162

Fabrication of biocomposite membrane with microcrystalline cellulose (MCC) extracted from sugarcane bagasse by phase inversion method

Thiangtham S., Runt J., Saito N., Manuspiya H.

Cellulose 27 巻 ( 3 ) 頁： 1367 - 1384 2020年2月

記述言語：英語掲載種別：研究論文（学術雑誌）出版者・発行元：Cellulose

Abstract: The design of biocomposite membranes based on microcrystalline cellulose (MCC) extracted from sugarcane bagasse added into matrices of poly(lactic acid) (PLA)/poly(butylene succinate) (PBS) was fabricated by the phase inversion method. The pore formation of biocomposite membranes was prepared by the phase inversion method, and the obtained biocomposite membranes showed a tunable microstructure formed in the membranes that was investigated by field-emission scanning electron microscope. Due to the high porosity and hydrophilic properties of MCC, the biocomposite membranes demonstrated excellent electrolyte wettability, large electrolyte uptake (up to 138%), and smaller interfacial resistance leading to enhancement of the ionic conductivity. Furthermore, the effects of MCC on the thermal properties of biocomposite membranes were evaluated by differential scanning calorimetry and the thermal shrinkage test. The addition of 5 wt% MCC showed the outstanding thermal stability of the biocomposite membranes. After thermal treatment at 135 °C for 1 h, this biocomposite membrane exhibited shrinkage of only 32% from the original shape while the PLA/PBS membrane showed shrinkage of 81%, which verifies that the introduction of MCC improves the thermal stabilities of biocomposite membranes. Promisingly, the biocomposite membranes represent candidate alternatives for future battery applications. Graphic abstract: [Figure not available: see fulltext.].

DOI： 10.1007/s10570-019-02866-3

Liquid-Phase Plasma-Assisted in Situ Synthesis of Amino-Rich Nanocarbon for Transition Metal Ion Adsorption

Tipplook M., Pornaroontham P., Watthanaphanit A., Saito N.

ACS Applied Nano Materials 3 巻 ( 1 ) 頁： 218 - 228 2020年1月

記述言語：英語掲載種別：研究論文（学術雑誌）出版者・発行元：ACS Applied Nano Materials

Amino-modified nanocarbon (NH2-C) has been widely used as an adsorbent for transition metal ion adsorption due to its high specific surface area, high electrical charge, and the ability to form a coordinate linkage to a transition metal ion. In this work, NH2-C was successfully synthesized from a mixture of phenol and (3-aminopropyl)triethoxysilane (APTES) through solution plasma processing, which performs both carbonization and amination simultaneously. This synthesis method eliminates the need to functionalize carbon with amino groups, as is required in the conventional process. Our NH2-C shows a better dispersion and a higher number of amino groups on both the external surface and inner pores, which enhances the adsorption capacity. The maximum capacities for Cu2+, Zn2+, and Cd2+ adsorption were 144.9, 115.4, and 102.0 mg g-1, respectively. These values were higher than those of five typical NH2-Cs synthesized by a conventional process. Based on the adsorption mechanism derived from adsorption kinetic, isotherm, and thermodynamic studies, the transition metal ions were chemisorbed to the surface in a monolayer endothermically and spontaneously. Moreover, it was found that NH2-C was suitable for use in ten consecutive adsorption-desorption cycles without significant loss of adsorption capacity.

DOI： 10.1021/acsanm.9b01915

Simultaneous deacetylation and degradation of chitin hydrogel by electrical discharge plasma using low sodium hydroxide concentrations

Rujiravanit R., Kantakanun M., Chokradjaroen C., Vanichvattanadecha C., Saito N.

Carbohydrate Polymers 228 巻 2020年1月

記述言語：英語掲載種別：研究論文（学術雑誌）出版者・発行元：Carbohydrate Polymers

Electrical discharge plasma occurring in a liquid phase, so called solution plasma, can generate highly active species, e.g. free radicals, which can involve in various chemical reactions, leading to less chemical uses. In this study, solution plasma was applied to deacetylation of chitin aiming to reduce the use of alkali. It was found that solution plasma could induce deacetylation of chitin hydrogels that were dispersed in MeOH/water solutions containing low NaOH concentrations (1–12%). Due to the action of free radicals, some extent of chain session of the polymer occurred during the plasma treatment. The degree of deacetylation and molecular weight of the obtained chitosan were 78% and 220 kDa, respectively, after the plasma treatment for five cycles (1 h/cycle) by using 90% MeOH/water solution containing 12% NaOH. The obtained chitosan could completely dissolve in 2% acetic acid solution and had antibacterial activities against S. aureus and E. coli.

DOI： 10.1016/j.carbpol.2019.115377

Synthesis of Au Nanoparticles in Natural Matrices by Liquid-Phase Plasma: Effects on Cytotoxic Activity against Normal and Cancer Cell Lines 査読有り国際共著

Treesukkasem N., Chokradjaroen C., Theeramunkong S., Saito N., Watthanaphanit A.

ACS Applied Nano Materials 2 巻 ( 12 ) 頁： 8051 - 8062 2019年12月

記述言語：英語掲載種別：研究論文（学術雑誌）出版者・発行元：ACS Applied Nano Materials

Wrapping of gold nanoparticles (AuNPs) with a biocompatible matrix, to gain AuNP colloids, is a general strategy to synthesize the AuNPs for biomedical purposes. This work reports the synthesis of AuNP colloids in the aqueous solution of several natural matrices using a liquid-phase plasma process. Two classes of natural substances used are sugars (including: glucose, fructose, and sucrose) and biopolymers (including: carboxymethyl cellulose, sodium alginate, and gelatin). All are negatively charged water-soluble substances that are claimed to be sources of energy for cells to grow and have a high potential to be compatible with them. The study has emerged since one question arises: "Do these matrices also promote the growth of cancer cells?" The synthesis is performed by generating plasma across a pair of electrodes immersed in an aqueous solution of a natural matrix containing a gold precursor (HAuCl4·3H2O). Two concentrations of the matrices (0.5 and 1.0% w/v) are used, and the plasma treatment times are varied (0, 10, and 30 min). The effect of the type and concentration of natural matrices as well as the plasma treatment time on the formation of AuNPs, along with their physical and chemical properties, including morphology, size, hydrodynamic diameter (dh), colloidal stability, and charge on the AuNP surface, is evaluated. We find that the charge of the AuNP surfaces could be altered by the plasma treatment. Eventually, cytotoxicity test results against normal (MRC-5) and cancer (H460 and HeLa) cell lines could not only answer our opening question but also suggest a rather complex response. Our findings indicate the great potential of the obtained AuNP colloids as a part of cancer therapy.

DOI： 10.1021/acsanm.9b02106

Nitriding an oxygen-doped nanocarbonaceous sorbent synthesized via solution plasma process for improving CO<inf>2</inf> adsorption capacity

Pornaroontham P., Panomsuwan G., Chae S., Saito N., Thouchprasitchai N., Phongboonchoo Y., Pongstabodee S.

Nanomaterials 9 巻 ( 12 ) 2019年12月

記述言語：英語掲載種別：研究論文（学術雑誌）出版者・発行元：Nanomaterials

The synthesis of carbon nanoparticles (Cn) and oxygen-doped nanocarbon (OCn) was successfully done through a one-step synthesis by the solution plasma process (SPP). The Cn and OCn were nitrogen-doped by nitridation under an ammonia atmosphere at 800◦C for 2 h to yield NCn and NOCn, respectively, for carbon dioxide (CO2) adsorption. The NOCn exhibited the highest specific surface area (~570 m2 g−1) and highest CO2 adsorption capacity (1.63 mmol g−1 at 25◦C) among the synthesized samples. The primary nitrogen species on the surface of NOCn were pyridinic-N and pyrrolic-N. The synergistic effect of microporosity and nitrogen functionality on the NOCn surface played an essential role in CO2 adsorption enhancement. From the thermodynamic viewpoint, the CO2 adsorption on NOCn was physisorption, exothermic, and spontaneous. The NOCn showed a more negative enthalpy of adsorption, indicating its stronger interaction for CO2 on the surface, and hence, the higher adsorption capacity. The CO2 adsorption on NOCn over the whole pressure range at 25–55◦C best fitted the Toth model, suggesting monolayer adsorption on the heterogeneous surface. In addition, NOCn expressed a higher selective CO2 adsorption than Cn and so was a good candidate for multicycle adsorption.

DOI： 10.3390/nano9121776

Quantitative spectrochemical analysis of solution plasma in aromatic molecules

Bratescu M.A., Kim K., Saito N.

Plasma Processes and Polymers 16 巻 ( 7 ) 2019年7月

記述言語：英語掲載種別：研究論文（学術雑誌）出版者・発行元：Plasma Processes and Polymers

A nonthermal plasma produced at atmospheric pressure in the gas resulted from the surrounding liquid is named solution plasma (SP). A quantitative and comparative spectrochemical analysis of the plasma gas and solution in benzene, pyridine, and aniline is performed. The number densities of dicarbon and cyano radicals and hydrogen molecule from the plasma gas are measured using a cheap, straightforward, and home-made optical set-up. By simply modifying the optical set-up, the molar concentration of newly formed chemical compounds is in situ obtained in the solution. The thermodynamic properties of aromatic molecules determine the electrical breakdown and the species number densities in the plasma gas. The production rate and atomic composition of carbon material are correlated with the radicals from plasma gas.

DOI： 10.1002/ppap.201900012

P-Type Doping of Graphene with Cationic Nitrogen

Chae S., Panomsuwan G., Bratescu M.A., Teshima K., Saito N.

ACS Applied Nano Materials 2 巻 ( 3 ) 頁： 1350 - 1355 2019年3月

記述言語：英語掲載種別：研究論文（学術雑誌）出版者・発行元：ACS Applied Nano Materials

Tailoring electrical properties of graphene by nitrogen doping is currently of great significance in a broad area of advanced applications. Bonding configuration of nitrogen atoms in graphene plays a vital role in controlling its electrical, chemical, and optical properties. Here, we report for the first time a simple bottom-up synthesis of a novel cationic nitrogen-doped graphene (CNG) by a solution plasma (SP). A mixture of ionic liquid and organic solvent was used as starting precursor. CNG exhibited an orthorhombic structure possibly due to the presence cationic nitrogen in hexagonal graphene lattice. Nitrogen doping content was found to be as high as 13.4 atom %. Electrical characterization demonstrated that the CNG exhibited a p-type semiconducting behavior with superior electrical conductivity and carrier concentration. Such unique electrical characteristics of CNG are mainly attributed to the presence of cationic nitrogen with preserved planar structure.

DOI： 10.1021/acsanm.8b02237

Production of reducing sugar from cassava starch waste (CSW) using solution plasma process (SPP)

Prasertsung I., Aroonraj K., Kamwilaisak K., Saito N., Damrongsakkul S.

Carbohydrate Polymers 205 巻頁： 472 - 479 2019年2月

記述言語：英語掲載種別：研究論文（学術雑誌）出版者・発行元：Carbohydrate Polymers

The cassava starch processing plays an important role in food industries. During starch processing stage, a large amount of cassava starch waste (CSW) which mainly contains lost starch product and solid residue such as cassava bagasse are produced. Starch and cassava bagasse can be hydrolyzed into fermentable sugar such as glucose. In the present study, the solution plasma process (SPP) is used to treat CSW to prepare reducing sugar. The investigated parameters are treatment time, solvent concentration, applied pulsed frequency, and CSW concentration. The %yield of total reducing sugar (TRS) and glucose were calculated by DNS method and glucose assay kit, respectively. The chemical structure, morphology, and crystal structure of plasma-treated CSW were investigated. The results showed that the %yield of TRS was greatly enhanced by SPP treatment compared to that of acid hydrolysis. The CSW powder completely broke down into pieces after SPP treatment was applied. The amorphous and crystalline regions of CSW were destroyed during SPP treatment. SPP treatment of CSW with light sulfuric acid concentration of 0.08 M, applied pulsed frequency of 30 kHz, and CSW concentration of 0.5%w/v provided 99.0% TRS and 47.9% glucose.

DOI： 10.1016/j.carbpol.2018.10.090

Enhanced degradation of methylene blue by a solution plasma process catalyzed by incidentally co-generated copper nanoparticles

Prasertsung I., Kaewcharoen S., Kunpinit K., Yaowarat W., Saito N., Phenrat T.

Water Science and Technology 79 巻 ( 5 ) 頁： 967 - 974 2019年

記述言語：英語掲載種別：研究論文（学術雑誌）出版者・発行元：Water Science and Technology

This study presents a catalytic organic pollution treatment using the solution plasma process (SPP) with incidentally co-generated copper (Cu) nanoparticles via Cu electrode erosion. Methylene blue (MB) was used as a model organic contaminant. The treatment time was from 0 to 60 minutes at the plasma frequencies of 15 and 30 kHz. The treatment efficacy using the Cu electrode was compared with that of the tungsten (W) electrode. The high erosion-resistant W electrode provided no W nanoparticles, while the low erosion-resistant Cu electrode yielded incidental nanoparticles (10-20 nm), hypothesized to catalyze the MB degradation during the SPP. The percentage of MB degradation and the hydrogen peroxide (H2O2) generation were determined by an ultraviolet-visible spectrophotometer. The results showed that, after the SPP by the Cu electrode for 60 minutes, the MB was degraded up to 96%. Using the Cu electrode at a high plasma frequency strongly accelerated the Cu nanoparticle generation and MB treatment, although the amount of H2O2 generated during the SPP using the Cu electrode was less than that of the W electrode. The Cu nanoparticles were hypothesized to enhance MB degradation via both homogeneous (release of dissolved Cu ions) and heterogeneous (on the surface of the particles) catalytic processes.

DOI： 10.2166/wst.2019.035

Maximization of sodium storage capacity of pure carbon material used in sodium-ion batteries 査読有り国際共著

Kang J., Kim D.Y., Chae S.A., Saito N., Choi S.Y., Kim K.H.

Journal of Materials Chemistry A 7 巻 ( 27 ) 頁： 16149 - 16160 2019年

記述言語：英語掲載種別：研究論文（学術雑誌）出版者・発行元：Journal of Materials Chemistry A

Generally, carbon anode materials used in sodium-ion batteries do not exhibit good electrochemical performance because of low coulombic efficiency (CE). This paper presents a strategy to overcome this limitation by causing a co-intercalation reaction in a newly designed material. Here, Na was doped inside carbons and desodiation was caused by cleaning the doped Na. Consequently, the CE consistently exceeded 100%. Furthermore, new spaces were created when the doped Na was released continuously from the carbons, thereby allowing more Na to be stored in these spaces. This consistently increased the reversible capacity during cycling. Even though the designed material was a nanomaterial with a large specific surface area, the CE in the first cycle was 85%. Because of the co-intercalation reaction, a solid-electrolyte interphase (SEI) layer might not be formed depending on the anode surface structure and continuous long-term stable cycling was possible even without an SEI layer. Thus, a useful material for sodium-ion batteries can be designed using only carbons and without next-generation materials.

DOI： 10.1039/c9ta01751h

Solution plasma-assisted green synthesis of MnO <inf>2</inf> adsorbent and removal of cationic pollutant

Kim H., Saito N., Kim D.

Journal of Chemistry 2019 巻 2019年

記述言語：英語掲載種別：研究論文（学術雑誌）出版者・発行元：Journal of Chemistry

In this study, we proposed the solution plasma-(SP-) assisted green synthesis method using plants extracts, i.e., glucose, with the expectation of acting as a reducing agent and promotor for the formation of powder state of nanostructured MnO 2 . MnO 2 was simply and rapidly synthesized within 10 min by the SP-assisted method. The structural features and morphology of as-synthesized MnO 2 were characterized by XRD, Raman, FE-SEM, and TEM analyses. For potential application of as-synthesized MnO 2 , cationic dye, i.e., methylene blue (MB), removal performance was investigated by batch experiment at an initial concentration of C 0 = 100 mg L -1 . The obtained MnO 2 exhibited effective dye removal ability given high C 0 , and simultaneously applied plasma discharging further enhanced removal efficiency. These contributions therefore open a new window not only on a powerful and environmentally benign synthesis route for efficient adsorbents but also on supporting multiple removal mechanism.

DOI： 10.1155/2019/7494292

Cytotoxicity against cancer cells of chitosan oligosaccharides prepared from chitosan powder degraded by electrical discharge plasma

Chokradjaroen C., Theeramunkong S., Yui H., Saito N., Rujiravanit R.

Carbohydrate Polymers 201 巻頁： 20 - 30 2018年12月

記述言語：英語掲載種別：研究論文（学術雑誌）出版者・発行元：Carbohydrate Polymers

Chitosan oligosaccharides, which obtain from degradation of chitosan, possess some interesting molecular weight-dependent biological properties, especially anticancer activity. Therefore, the conversion of chitosan to chitosan oligosaccharides with specific molecular weight has been continuously investigated in order to find effective strategies that can achieve both economic feasibility and environmental concerns. In this study, a novel process was developed to heterogeneously degrade chitosan powder by highly active species generated by electrical discharge plasma in a dilute salt solution (0.02 M) without the addition of other chemicals. The degradation rate obtained from the proposed process was comparable to that obtained from some other methods with the addition of acids and oxidizing agents. Separation of the water-soluble degraded products containing chitosan oligosaccharides from the reaction solution was simply done by filtration. The obtained chitosan oligosaccharides were further evaluated for an influence of their molecular weights on cytotoxicity against cancer cells and the selectivity toward cancer and normal cells.

DOI： 10.1016/j.carbpol.2018.08.037

Mechanistic aspect based on the role of reactive oxidizing species (ROS) in macroscopic level on the glycerol photooxidation over defected and defected-free TiO<inf>2</inf>

Jedsukontorn T., Ueno T., Saito N., Hunsom M.

Journal of Photochemistry and Photobiology A: Chemistry 367 巻頁： 270 - 281 2018年12月

記述言語：英語掲載種別：研究論文（学術雑誌）出版者・発行元：Journal of Photochemistry and Photobiology A: Chemistry

The activity of commercial (defected-free) TiO2 and black (defected) TiO2 photocatalysts was comparatively tested in the glycerol photooxidation reaction. The preliminary results demonstrated that similar compounds, including glyceraldehyde (GCD), dihydroxyacetone (DHA), glycolic acid (GCOA), formaldehyde (FMD) and glycolaldehyde (GCAD), were generated from the photocatalytic oxidation of glycerol via both photocatalysts, but they differed in their yields. The black TiO2 exhibited a higher photocatalytic activity to convert glycerol than the commercial TiO2, due to the presence of some defective structure and its low band gap energy, and also promoted the generation of GCAD as the main product. In contrast, the commercial TiO2 promoted the formation of GCD as the major product. The principle reactive oxidizing species (ROS) contributing for glycerol conversion via black TiO2 can be ranked in the order of O2•->O12>OHb•>h+/OHs•>h+. The dominate ROS related to the conversion of glycerol to GCD and DHA were O2•- and OHb•, respectively. The main ROS to alter GCD and DHA to GCAD/FMD was O2•-, while the h+ was the principle ROS to convert GCD to GCOA. Finally, the pathway of glycerol conversion and product distribution over black TiO2 via various ROS in the presence of oxygen as electron acceptor is proposed.

DOI： 10.1016/j.jphotochem.2018.08.030

　前のページ - 次のページ　

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19