Updated on 2024/08/30

写真a

 
ZHANG Ruixi
 
Organization
Graduate School of Engineering Micro-Nano Mechanical Science and Engineering 1 Assistant Professor
Graduate School
Graduate School of Engineering
Undergraduate School
School of Engineering Mechanical and Aerospace Engineering
Title
Assistant Professor
External link

Degree 1

  1. Doctor of Philosophy ( 2023.3   The University of Tokyo ) 

Research Areas 1

  1. Manufacturing Technology (Mechanical Engineering, Electrical and Electronic Engineering, Chemical Engineering) / Machine elements and tribology  / Tribology, Friction, Mechanical materials, Mechanical elements, Deposition

Research History 1

  1. Nagoya University   Assistant Professor

    2023.4

Professional Memberships 2

  1. The Japan Society of Mechanical Engineers

  2. Japanese Society of Tribologists

Committee Memberships 2

  1.   Executive Committee Member of ISPlasma2024/IC-PLANTS2024/APSPT-13  

    2023.7 - 2024.3   

  2.   Executive Committee Member of The 10th International Conference on Mechanics and Materials in Design M2D 2024  

    2023.6 - 2024.9   

 

Papers 8

  1. Fabricating one-dimensional van der Waals heterostructures on chirality-sorted single-walled carbon nanotubes Reviewed International coauthorship International journal

    Ruixi Zhang, Ya Feng, Henan Li, Akihito Kumamoto, Shuhui Wang, Yongjia Zheng, Wanyu Dai, Nan Fang, Ming Liu, Takeshi Tanaka, Yuichiro K. Kato, Hiromichi Kataura, Yuichi Ikuhara, Shigeo Maruyama, Rong Xiang

    Carbon   Vol. 199   page: 407 - 414   2022.10

     More details

    Authorship:Lead author   Language:English   Publishing type:Research paper (scientific journal)  

    DOI: https://doi.org/10.1016/j.carbon.2022.07.076

  2. The development of B/Cr co-doped DLC coating by FCVA deposition system and its tribological properties at 300 °C Reviewed International coauthorship

    Ruixi Zhang, Woo-Young Lee, Noritsugu Umehara, Takayuki Tokoroyama, Motoyuki Murashima, Yuji Takimoto

    Surface and Coatings Technology   Vol. 487 ( 130968 )   2024.7

     More details

    Authorship:Lead author, Corresponding author   Language:English   Publishing type:Research paper (scientific journal)  

    DOI: https://doi.org/10.1016/j.surfcoat.2024.130968

  3. Clarification of the corrosion and frictional behavior of nitrogen-doped ta-C coating in nitride acid solution Reviewed

    R. Zhang, H. Feng, N. Umehara, T. Tokoroyama

    Proceedings of the 5th International Tribology Symposium of IFToMM in “Mechanism and Machine Science     2024

     More details

    Authorship:Lead author, Corresponding author   Language:English   Publishing type:Research paper (international conference proceedings)  

  4. Effect of hydrogen doping for ta-C on friction of ta-C:H sliding against bearing steel in high temperature and high vacuum Reviewed

    R. Zhang, D. Yasuda, N. Umehara, T. Tokoroyama

    Proceedings of the 5th International Tribology Symposium of IFToMM in “Mechanism and Machine Science     2024

     More details

    Authorship:Lead author   Language:English   Publishing type:Research paper (international conference proceedings)  

  5. Corrosion and tribological properties of ta-C/ta-C: Ta coatings: Analysis of the influence of Ta-O/Ta-C ratio Reviewed International journal

    Li, LL; Tokoroyama, T; Zhang, RX; Umehara, N

    TRIBOLOGY INTERNATIONAL   Vol. 198   2024.10

     More details

    Language:English   Publisher:Tribology International  

    Multilayer ta-C/ta-C: Ta coatings with varying total thicknesses (300, 600, and 1000 nm) and layer thickness ratios (1:0.5, 1:1, and 1:2) between the ta-C layer and ta-C: Ta layer were prepared. The study investigated the static corrosion resistance and tribological properties of the coatings in the NaCl solution. The static corrosion resistance positive correlation depended on the coating surface's Ta-O/Ta-C ratio. The lowest friction coefficient of 0.05 was obtained from the coating with a total thickness of 1000 nm due to the formation of the graphitized transfer film on the counterpart surface. A decreased sp2/sp3 ratio and the formation of tantalum oxide on the wear scar contributed to the lowest corrosion current, corrosive defect density, and wear rate.

    DOI: 10.1016/j.triboint.2024.109916

    Web of Science

    Scopus

  6. Development of precipitation lubrication with palmitic acid and its friction mechanism

    Hashizume N., Takano R., Umehara N., Tokoroyama T., Zhang R., Hanyuda K., Otsuka A., Ueda M.

    Tribology International   Vol. 200   2024.12

     More details

    Publisher:Tribology International  

    Conventional friction modifier MoDTC becomes ineffective at lower temperatures. This paper investigates the concept of “precipitation lubrication,” where saturated fatty acid precipitation enhances load-bearing capacity and solid lubrication at contact points to overcome this issue. PAO8 with 4.2 % palmitic acid lubricant was prepared, precipitating below 35 °C, reducing friction by approximately 14 % at 30 °C for both boundary and mixed lubrication. In situ reflectance spectroscopy demonstrated palmitic acid forming a solid layer on the disk specimen, preventing direct contact between asperities and significantly reducing friction. These findings underscore the effectiveness of palmitic acid precipitation in enhancing lubrication performance at lower temperatures.

    DOI: 10.1016/j.triboint.2024.110066

    Scopus

  7. In situ Observation of the Formation of MoDTC-Derived Tribofilm on a Bearing Steel with Different Surface Roughness by Using a Reflectance Spectroscopy and Its Effects on Friction Reviewed International coauthorship

    Hashizume, N; Tokoroyama, T; Umehara, N; Murashima, M; Lee, WY; Zhang, RX; Kunisu, M; Shioji, H; Oharada, K

    TRIBOLOGY LETTERS   Vol. 72 ( 1 )   2024.3

     More details

    Language:English   Publisher:Tribology Letters  

    In this paper, we evaluated the formation of MoDTC-derived tribofilm and its effects on friction reduction. We conducted in situ observation using reflectance spectroscopy to monitor the tribofilm's evolution during friction, allowing us to estimate its thickness and composition. The results revealed that the rough specimen (Ra= 12.7 nm) maintained a smaller friction coefficient and a larger volume fraction of MoS2 compared to the smooth specimen (Ra= 2.6 nm). Additionally, using the in situ observed composition and contact state, we inferred changes in the frictional properties of the tribofilm formed on both specimens. This analysis suggested that the pronounced direct contact of asperities, especially evident in the rough specimen, promoted the formation of a low-friction tribofilm (primarily MoS2), enabling the rough specimen to sustain lower friction. Graphical abstract: [Figure not available: see fulltext.].

    DOI: 10.1007/s11249-023-01810-8

    Web of Science

    Scopus

    researchmap

  8. The Effect of Carbon Structure of DLC Coatings on Friction Characteristics of MoDTC-Derived Tribofilm by Using an In Situ Reflectance Spectroscopy

    Hashizume, N; Yamamoto, Y; Chen, C; Tokoroyama, T; Zhang, RX; Diao, DF; Umehara, N

    TRIBOLOGY LETTERS   Vol. 72 ( 1 )   2024.3

     More details

    Publisher:Tribology Letters  

    In this study, six types of DLC coatings were prepared, featuring different carbon structures (including amorphous ta-C coatings and GNC coatings with nanocrystallites) and different doped Ta amounts, to investigate friction characteristics. The results of friction tests with MoDTC-added lubricant revealed a consistent trend: DLC coatings with a higher ID/IG ratio exhibited lower friction coefficients. In addition, in situ observations using reflectance spectroscopy highlighted that the tribofilm formed on DLC coatings with a higher ID/IG ratio maintained a higher MoS2/(MoS2+MoO3) ratio, which exhibited a strong correlation with the friction coefficient. Measurements of a work function of each DLC coating indicated that those with a higher ID/IG ratio had a higher work function, suggesting the inclusion of a larger amount of graphite structure defects. These active defects in the graphite structure were deemed responsible for enhancing the friction reduction effect of MoDTC. The outcomes of this study propose a material design approach for DLC coatings that amplifies the effectiveness of lubricant additives in friction reduction. Graphical abstract: (Figure presented.).

    DOI: 10.1007/s11249-024-01829-5

    Web of Science

    Scopus

    researchmap

▼display all

Presentations 13

  1. The tribological properties of DLCs with various dopants and clarification of the mechanism at 200℃ International conference

    Ruixi Zhang, Noritsugu Umehara, Takayuki Tokoroyama, Motoyuki Murashima

    The 8th International Conference on Manufacturing, Machine Design and Tribology  2019.4.25 

     More details

    Event date: 2019.4

    Language:English   Presentation type:Oral presentation (general)  

    Venue:Kagoshima, Japan   Country:Japan  

  2. The Tribological Behavior of DLC Coatings Induced by B/Cr Co-Doping and Clarification of Their Mechanism International conference

    Ruixi Zhang, Noritsugu Umehara, Takayuki Tokoroyama, Motoyuki Murashima, Yuji Takimoto

    International Tribology Conference Sendai 2019  2019.9.21 

     More details

    Event date: 2019.9

    Language:English   Presentation type:Oral presentation (general)  

    Venue:Sendai, Japan   Country:Japan  

  3. 300℃大気中無潤滑下におけるDLC膜の摩擦特性に及ぼす相手材の影響

    張鋭璽,梅原徳次,野老山貴行,村島基之

    第9回トライボロジー秋の学校 in 愛知  2018.10.4 

     More details

    Event date: 2018.10

    Language:Japanese   Presentation type:Poster presentation  

    Venue:あいち健康プラザ in 愛知県知多郡   Country:Japan  

  4. Synthesis and Structural Characterizations of Zeolite-supported Coaxial Carbon Nanotubes and Boron Nitride Nanotubes Van der Waals Heterostructures International conference

    Ruixi Zhang, Ya Feng, Henan Li, Yongjia Zheng, Rong Xiang, Shigeo Maruyama

    NT21: The 21st International Conference on the Science and Application of Nanotubes and Low-Dimensional Materials  2021.6 

     More details

    Event date: 2021.6

    Language:English   Presentation type:Poster presentation  

    Venue:Houston, USA   Country:United States  

  5. Synthesis of Boron Nitride Nanotubes with the Chirality-Sorted Carbon Nanotubes as the Template

    Ruixi Zhang, Ya Feng, Yongjia Zheng, Ming Liu, Keigo Otsuka, Takeshi Tanaka, Hiromichi Kataura, Rong Xiang, Shigeo Maruyama

    FNTG62: The 62nd Fullerenes-Nanotubes-Graphene General Symposium  2022.3.2  The Fullerenes, Nanotubes and Graphene Research Society

     More details

    Event date: 2022.3

    Language:English   Presentation type:Poster presentation  

    Venue:Nagoya, Japan   Country:Japan  

  6. Synthesis and Structural Characterization of Boron Nitride Nanotubes with the Chirality-Sorted Carbon Nanotubes as the Template International conference

    Ruixi Zhang, Ya Feng, Henan Li, Akihito Kumamoto, Shuhui Wang, Yongjia Zheng, Ming Liu, Wanyu Dai, Keigo Otsuka, Takeshi Tanaka, Hiromichi Kataura, Yuichi Ikuhara, Shigeo Maruyama, Rong Xiang

    NT22: The 22nd International Conference on the Science and Application of Nanotubes and Low-Dimensional Materials  2022.6.21 

     More details

    Event date: 2022.6

    Language:English   Presentation type:Poster presentation  

    Venue:Suwon, Republic of Korea   Country:Korea, Republic of  

  7. In-situ synthesis of zeolite-based BNNT hetero-nanotubes on TEM grid and their structural characterization International coauthorship

    Ruixi Zhang, Dmitry Levshov, Keigo Otsuka, Yongjia Zheng, Shuhui Wang, Ya Feng, Sofie Cambré, Rong Xiang, Shigeo Maruyama

    The 64th Fullerenes-Nanotubes-Graphene General Symposium  2023.3.3  The Fullerenes, Nanotubes, Graphene Research Society

     More details

    Event date: 2023.3

    Language:English   Presentation type:Poster presentation  

    Venue:Nagoya, Japan   Country:Japan  

  8. The tribological properties of DLC coating with B/Cr co-dopants and clarification of the mechanism at 300℃ International coauthorship International conference

    Ruixi Zhang, Woo-Young Lee, Noritsugu Umehara, Takayuki Tokoroyama, Motoyuki Murashima, Yuji Takimoto

    The 16th IFToMM World Congress (International Federation for the Promotion of Mechanism and Machine Science)  2023.11.8 

     More details

    Event date: 2023.11

    Language:English   Presentation type:Oral presentation (general)  

    Venue:Nishi-Shinjuku, Tokyo, Japan   Country:Japan  

  9. The Tribo-corrosion Properties of Hard Carbonaceous Coatings International conference

    Lu Lu Li, Takayuki Tokoroyama, Ruixi Zhang, Noritsugu Umehara

    ITC Fukuoka 2023 (9th International Tribology Conference, Fukuoka 2023)  2023.9.30 

     More details

    Event date: 2023.9

    Language:English   Presentation type:Oral presentation (general)  

    Venue:Fukuoka International Congress Center, Fukuoka, Japan   Country:Japan  

  10. Tribo-corrosion properties of hard carbonaceous coatings International conference

    Li Lulu, Noritsugu Umehara, Takayuki Tokoroyama, Ruixi Zhang

    The 16th IFToMM World Congress (International Federation for the Promotion of Mechanism and Machine Science)  2023.11.8 

     More details

    Event date: 2023.11

    Language:English   Presentation type:Oral presentation (general)  

    Venue:Nishi-Shinjuku, Tokyo, Japan   Country:Japan  

  11. Development of low-friction DLC surface with liquid film derived from the air using dielectric barrier discharge International conference

    Wenjun Wu, Noritsugu Umehara, Takayuki Tokoroyama, Motoyuki Murashima, Ruixi Zhang

    The 16th IFToMM World Congress (International Federation for the Promotion of Mechanism and Machine Science)   2023.11.8 

     More details

    Event date: 2023.11

    Language:English   Presentation type:Oral presentation (general)  

    Venue:Nishi-Shinjuku, Tokyo, Japan   Country:Japan  

  12. The Tribo-corrosion Properties of Hard Carbonaceous Coatings International conference

    Lu Lu Li, Takayuki Tokoroyama, Ruixi Zhang, Noritsugu Umehara

    ITC Fukuoka 2023 (9th International Tribology Conference, Fukuoka 2023)  2023.9.30 

     More details

    Event date: 2023.9

    Language:English   Presentation type:Oral presentation (general)  

    Venue:Fukuoka International Congress Center, Fukuoka, Japan   Country:Japan  

    researchmap

  13. 1D Heterostructures grown on Semi-conducting Single-walled Carbon Nanotube Thin Film International coauthorship International conference

    Shuhui Wang, Ming Liu, Ya Feng, Chiyu Zhang, Koki Kozaki, Ruixi Zhang, Yongjia Zheng, Keigo Otsuka, Shohei Chiashi, Takeshi Tanaka, Hiromichi Kataura, Rong Xiang, Yuhuang Wang, Shigeo Maruyama.

    NT22: The 22nd International Conference on the Science and Application of Nanotubes and Low-Dimensional Materials  2022.6.20 

     More details

    Event date: 2022.6

    Language:English   Presentation type:Poster presentation  

    Venue:Suwon, Republic of Korea   Country:Korea, Republic of  

▼display all

 

Teaching Experience (On-campus) 3

  1. 自動車工学実験1

    2023

  2. 機械・航空宇宙工学実験第2

    2023

  3. 機械・航空宇宙工学実験第1

    2023

 

Social Contribution 3

  1. テクノ・フェア名大2023

    Role(s):Appearance, Informant

    名古屋大学大学院工学研究科  2023.10

  2. 2023年度講習会ものづくり実践講座シリーズ

    Role(s):Lecturer, Organizing member

    精密工学会東海支部  2023.9

  3. Open Campus 2023

    Role(s):Organizing member

    Nagoya University  2023.8