Faculty Profiles - MATSUO Yutaka

Papers - MATSUO Yutaka

Division display 101 - 120 of about 300 ／ All the affair displays >>

Perovskite Solar Cells Using Carbon Nanotubes Both as Cathode and as Anode Reviewed International coauthorship

Il Jeon, Seungju Seo, Yuta Sato, Clement Delacou, Anton Anisimov, Kazu Suenaga, Esko I. Kauppinen, Shigeo Maruyama, Yutaka Matsuo

JOURNAL OF PHYSICAL CHEMISTRY C Vol. 121 ( 46 ) page： 25743 - 25749 2017.11

Authorship：Last author,　Corresponding author Language：English Publishing type：Research paper (scientific journal) Publisher：AMER CHEMICAL SOC

Organic-inorganic halide perovskite solar cells have received much attention because they achieve high power conversion efficiencies while providing the advantages of thin-film solar cells, namely, solution processability and potentially low fabrication costs. However, at the current level of halide perovskite solar cell technology, these advantages cannot be maximized because of structural and material limitations. Here, we provide a solution to these problems by replacing conventional metal and metal oxide electrodes with carbon nanotube electrodes. We also simplified the structure to achieve entirely solution-processable perovskite solar cells. Through this study, we demonstrate the function of carbon nanotubes as both the anode and the cathode in perovskite solar cells. Economic modeling suggests that this novel architecture reduces costs dramatically. This work realizes innovations in the materials, costs, and processing of inverted-type perovskite solar cells.

DOI： 10.1021/acs.jpcc.7b10334

Web of Science

researchmap

Synthesis and Crystal Structure of Li+@Fluoreno[60]fullerene: Effect of Encapsulated Lithium Ion on Electrochemistry of Spiroannelated Fullerene Reviewed International coauthorship

Hiroshi Ueno, Hiroshi Okada, Shinobu Aoyagi, Yutaka Matsuo

Journal of Organic Chemistry Vol. 82 page： 11631 - 11635 2017.10

Highly Conductive and Transparent Large-Area Bilayer Graphene Realized by MoCl5 Intercalation Reviewed

Hiroki Kinoshita, Il Jeon, Mina Maruyama, Kenji Kawahara, Yuri Terao, Dong Ding, Rika Matsumoto, Yutaka Matsuo, Susumu Okada, Hiroki Ago

Advanced Materials Vol. 29 ( 41 ) page： 1702141 2017.9

Language：English Publishing type：Research paper (scientific journal) Publisher：WILEY-V C H VERLAG GMBH

Bilayer graphene (BLG) comprises a 2D nanospace sandwiched by two parallel graphene sheets that can be used to intercalate molecules or ions for attaining novel functionalities. However, intercalation is mostly demonstrated with small, exfoliated graphene flakes. This study demonstrates intercalation of molybdenum chloride (MoCl5 ) into a large-area, uniform BLG sheet, which is grown by chemical vapor deposition (CVD). This study reveals that the degree of MoCl5 intercalation strongly depends on the stacking order of the graphene; twist-stacked graphene shows a much higher degree of intercalation than AB-stacked. Density functional theory calculations suggest that weak interlayer coupling in the twist-stacked graphene contributes to the effective intercalation. By selectively synthesizing twist-rich BLG films through control of the CVD conditions, low sheet resistance (83 Ω ▫(-1) ) is realized after MoCl5 intercalation, while maintaining high optical transmittance (≈95%). The low sheet resistance state is relatively stable in air for more than three months. Furthermore, the intercalated BLG film is applied to organic solar cells, realizing a high power conversion efficiency.

DOI： 10.1002/adma.201702141

researchmap

Regiocontrolled Electrosynthesis of [60]Fullerene Bisadducts: Photovoltaic Performance and Crystal Structures of C-60 o-Quinodimethane Bisadducts Reviewed International coauthorship

Zong-Jun Li, Sisi Wang, Shu-Hui Li, Tao Sun, Wei-Wei Yang, Kazutaka Shoyama, Takafumi Nakagawa, Il Jeon, Xiaoniu Yang, Yutaka Matsuo, Xiang Gao

JOURNAL OF ORGANIC CHEMISTRY Vol. 82 ( 16 ) page： 8676 - 8685 2017.8

Authorship：Corresponding author Language：English Publishing type：Research paper (scientific journal) Publisher：AMER CHEMICAL SOC

C-60 o-quinodimethane bisadducts [C-60(QM)(2)] are promising electron acceptors for bulk heterojuction (BHJ) organic solar cells (OSCs). However, previous production of C-60(QM)(2) often resulted in excessive regioisomers, which were difficult to purify and might consequently obscure the structure performance study of the organofullerene acceptors. Herein, the electrosynthesis of C-60(QM)(2) is reported. The reaction exhibits a strong regiocontrol with generation of fewer regioisomers. Pure regioisomers of cis-2, trans-3, and e C-60(QM)(2) are obtained, and the structures are solved with single-crystal X-ray diffraction. Interestingly, the cis-2 and trans-3 regioisomers exhibit better photovoltaic performance than the e regioisomer in the OSCs based on poly(3-hexylthiophene) (P3HT), which can be correlated with their structural difference.

DOI： 10.1021/acs.joc.7b01732

Web of Science

PubMed

researchmap

Crystallographic Structure Determination of Both [5,6]- and [6,6] Isomers of Lithium-Ion-Containing Diphenylmethano[60]fullerene Reviewed

Hiroshi Okada, Hiroki Kawakami, Shinobu Aoyagi, Yutaka Matsuo

JOURNAL OF ORGANIC CHEMISTRY Vol. 82 ( 11 ) page： 5868 - 5872 2017.6

Language：English Publishing type：Research paper (scientific journal) Publisher：AMER CHEMICAL SOC

Organic functionalization of lithium-ion-containing [60]fullerene, Li+@C-60, was performed by using diphenyl(diazo)methane as a stable, readily available diazo compound to obtain lithium-ion-containing [5,6]- and [6,6]-diphenylmethano[60]fullerenes, Li+@C61Ph2. The bis(trifluoromethanesulfonyl)imide (TFSI) salts of [5,6]- and [6,6]-Li+@C61Ph2 were successfully separated by using a cation exchange column with eluent containing LiTFSI. Improved separation protocol and high crystallinity of ionic components in less polar solvents enabled separate crystallization of each isomer. Both [5,6]-open and [6,6]-closed structures of Li+@C61Ph2 were determined by synchrotron radiation X-ray crystallography. Elucidating the [5,6] -open methano[60]fullerene (fulleroid) structure will contribute to materials research on fulleroids.

DOI： 10.1021/acs.joc.7b00730

Scalable and Solid-state Redox Functionalization of Transparent Single-walled Carbon Nanotube Films for Highly Efficient and Stable Solar Cells Reviewed International coauthorship

Kehang Cui, Yang Qian, Il Jeon, Anton Anisimov, Yutaka Matsuo, Esko I. Kauppinen, Shigeo Maruyama

Advanced Energy Materials Vol. 7 page： 1700449 2017.5

Dual Interfacial Modifications Enable High Performance Semitransparent Perovskite Solar Cells with Large Open Circuit Voltage and Fill Factor Reviewed

Qifan Xue, Yang Bai, Meiyue Liu, Ruoxi Xia, Zhicheng Hu, Ziming Chen, Xiao-Fang Jiang, Fei Huang, Shihe Yang, Yutaka Matsuo, Hin-Lap Yip, Yong Cao

ADVANCED ENERGY MATERIALS Vol. 7 ( 9 ) 2017.5

Language：English Publishing type：Research paper (scientific journal) Publisher：WILEY-V C H VERLAG GMBH

In this work, both anode and cathode interfaces of p-i-n CH3NH3PbI3 perovskite solar cells (PVSCs) are simultaneously modified to achieve large open-circuit voltage (V-oc) and fill factor (FF) for high performance semitransparent PVSCs (ST-PVSCs). At the anode, modified NiO serves as an efficient hole transport layer with appropriate surface property to promote the formation of smooth perovskite film with high coverage. At the cathode, a fullerene bisadduct, C-60(CH2)(Ind), with a shallow lowest unoccupied molecular orbital level, is introduced to replace the commonly used phenyl-C-61-butyric acid methyl ester (PCBM) as an alternative electron transport layer in PVSCs for better energy level matching with the conduction band of the perovskite layer. Therefore, the V-oc, FF and power conversion efficiency (PCE) of the PVSCs increase from 1.05 V, 0.74 and 16.2% to 1.13 V, 0.80 and 18.1% when the PCBM is replaced by C-60(CH2)(Ind). With the advantages of high V-oc and FF, ST-PVSCs are also fabricated using an ultrathin transparent Ag as cathode, showing an encouraging PCEs of 12.6% with corresponding average visible transmittance (AVT) over 20%. These are the highest PCEs reported for ST-PVSCs with similar AVTs paving the way for using ST-PVSCs as power generating windows.

DOI： 10.1002/aenm.201602333

Web of Science

researchmap

Indium Tin Oxide-free Small Molecule Organic Solar Cells Using Single-walled Carbon Nanotube Electrodes Reviewed International coauthorship Open Access

Clément Delacou, Il Jeon, Seungju Seo, Takafumi Nakagawa, Esko I. Kauppinen, Shigeo Maruyama, Yutaka Matsuo

ECS Journal of Solid State Science and Technology Vol. 6 ( 6 ) page： M3181 - M3184 2017.5

Authorship：Last author,　Corresponding author Language：English Publishing type：Research paper (scientific journal) Publisher：Electrochemical Society Inc.

We demonstrated single-walled carbon nanotubes (SWNTs) electrode-based small molecule organic solar cells (OSCs) using diketopyrrolopyrrole donor, DPP(TBFu)2 as an electron donor with [6,6]-phenyl-C61-butyric acid methyl ester (PC61BM) as an electron acceptor. SWNT films with 60% transmittance (at 550 nm) were dry-transferred onto glass substrates to replace conventional indium tin oxide (ITO) electrodes. In order to improve the conductivity of the SWNT electrodes, MoOx thermal doping was applied followed by spin coating of poly(3,4-ethylenedioxythiophene):polystyrenesulfonate (PEDOT:PSS) to enhance doping and electrode blocking function. The indium-free devices showed a power conversion efficiency (PCE) of 1.00% while ITO-based devices showed a PCE of 3.79%.

DOI： 10.1149/2.0311706jss

Open Access

Scopus

researchmap

Regioselective acylation and carboxylation of [60] fulleroindoline via electrochemical synthesis Reviewed

Hao-Sheng Lin, Yutaka Matsuo, Jun-Jie Wang, Guan-Wu Wang

ORGANIC CHEMISTRY FRONTIERS Vol. 4 ( 4 ) page： 603 - 607 2017.4

Language：English Publishing type：Research paper (scientific journal) Publisher：ROYAL SOC CHEMISTRY

A regioselective and highly efficient electrochemical method for direct acylation and carboxylation of a [60] fulleroindoline has been developed. By using inexpensive and readily available acyl chlorides and chloroformates, both keto and ester groups can be easily attached onto the fullerene skeleton to afford 1,2,3,16-functionalized [60] fullerene derivatives regioselectively. In addition, a plausible mechanism for the formation of fullerenyl ketones and esters is proposed, and their further transformations under basic and acidic conditions have been investigated.

DOI： 10.1039/c6qo00654j

Web of Science

researchmap

Structures and properties of Saturn-like complexes composed of oligothiophene macrocycle with methano[60]fullerene and [70]fullerene Reviewed Open Access

Iyoda Masahiko, Shimizu Hideyuki, Aoyagi Shinobu, Okada Hiroshi, Zhou Biao, Matsuo Yutaka

CANADIAN JOURNAL OF CHEMISTRY Vol. 95 ( 3 ) page： 315 - 319 2017.3

An efficient organic solvent-free solution-processing strategy for high-mobility metal chalcogenide film growth Reviewed

Jie Zhao, Il Jeon, Qinghua Yi, Menka Jain, Mark H. Rummeli, Pingyuan Song, Yutaka Matsuo, Guifu Zou

GREEN CHEMISTRY Vol. 19 ( 4 ) page： 946 - 951 2017.2

Language：English Publishing type：Research paper (scientific journal) Publisher：ROYAL SOC CHEMISTRY

One of the primary challenges for high-quality metal chalcogenide film growth by a chemical solution approach is to avoid the use of volatile/hazardous organic solvents during the fabrication processes. Herein, we demonstrate an organic solvent-free solution processing method which has the ability to enable growth of a diverse range of metal chalcogenide films. The processing solution is prepared by combining the required metal ions with non-volatile and non-flammable ionic liquid precursor solutions. These stable and homogeneous solutions can form a variety of high-quality and uniform metal chalcogenide films. Due to the facile and instant control of the stoichiometry used in this method, the band gap of multi-element compound semiconductors, for example quinary Cu2ZnSn( S, Se) (4), can be easily tuned from 1.01 eV of Cu2ZnSnSe4 to 1.52 eV of Cu2ZnSnS4. The resulting film also shows high hole mobility with a maximum of 56.9 cm(2) V-1 s(-1) for a carrier concentration of 3.24 x 10(16) cm(-3) at room temperature. Cu2ZnSnS4-based solar cells displayed an efficiency of 5.68%, which is comparable to the reported efficiencies of solar cells prepared by methods involving organic solvents ( 5.0-6.4%).

DOI： 10.1039/c6gc02489k

Web of Science

researchmap

Polymer-Fullerene Solar Cells Reviewed

Il Jeon, Yutaka Matsuo

Encyclopedia of Polymer Science and Technology page： 1 - 17 2017.2

Fullerene Cation-mediated Demethylation/Cyclization to give 5- and 7-Membered Cyclo[60]fullerene Derivatives Reviewed

Yutaka Matsuo, Keisuke Ogumi, Ying Zhang, Hiroshi Okada, Takafumi Nakagawa, Hiroshi Ueno, Akiko Gocho, Eiichi Nakamura

JOURNAL OF MATERIALS CHEMISTRY A Vol. 5 ( 6 ) page： 2774 - 2783 2017.2

Authorship：Lead author,　Corresponding author Language：English Publishing type：Research paper (scientific journal) Publisher：ROYAL SOC CHEMISTRY

Single-bonded fullerene dimers, (C60R)(2) (R = (2-methoxyphenyl)dimethylsilylmethyl, (isopropoxy) dimethylsilylmethyl, and 2-methoxy-5-methylphenyl), afforded fullerene derivative cations (RC60+) in the presence of an oxidant (I-2, CuCl2, or CuBr2), leading to 5- and 7-membered cyclo[60]fullerene derivatives such as cyclo[60]fullerenes containing a Si-O bond, cyclo[60]fullerenes containing a C-60-O bond, and dihydrobenzofurano[60]fullerene. The reaction mechanism involved thermal homolytic cleavage to give fullerene radicals, oxidation of the radicals to generate fullerene cations, and then demethylative cyclization in which the fullerene cationic centers interact with an aromatic group or the oxygen atoms of methoxy groups to produce the cyclized products. The obtained cyclo[60]fullerene derivatives were used in bulk-heterojunction organic solar cells and showed moderate power conversion efficiency and respectable open-circuit voltage.

DOI： 10.1039/c6ta10319g

Web of Science

researchmap

Room Temperature-processed Inverted Organic Solar Cells using High Working-pressure-sputtered ZnO Film Reviewed

Il Jeon, Yang Qian, Shoichiro Nakao, Daisuke Ogawa, Rong Xiang, Taiki Inoue, Shohei Chiashi, Tetsuya Hasegawa, Shigeo Maruyama, Yutaka Matsuo

Journal of Materials Chemistry A Vol. 4 page： 18763 - 18768 2016.11

Interface Engineering of Metal Oxides using Ammonium Anthracene in Inverted Organic Solar Cells Reviewed

Jeon Il, Zeijkovic Sasa, Kondo Kei, Yoshizawa Michito, Matsuo Yutaka

ACS APPLIED MATERIALS & INTERFACES Vol. 8 ( 44 ) page： 29866 - 29871 2016.11

Metal-electrode-free Window-like Organic Solar Cells with p-Doped Carbon Nanotube Thin-film Electrodes Reviewed Open Access

Jeon Il, Delacou Clement, Kaskela Antti, Kauppinen Esko I., Maruyama Shigeo, Matsuo Yutaka

SCIENTIFIC REPORTS Vol. 6 2016.8

Enhancement of fill factor in air-processed inverted organic solar cells using self-assembled monolayer of fullerene catechol Reviewed

Jeon Il, Ogumi Keisuke, Nakagawa Takafumi, Matsuo Yutaka

JAPANESE JOURNAL OF APPLIED PHYSICS Vol. 55 ( 8 ) 2016.8

Stability of diketopyrrolopyrrole small-molecule inverted organic solar cells Reviewed

Jeon Il, Sakai Ryohei, Nakagawa Takafumi, Setoguchi Hiroki, Matsuo Yutaka

ORGANIC ELECTRONICS Vol. 35 page： 193 - 198 2016.8

Enhancement of Low-field Magnetoresistance in Self-Assembled Epitaxial La0.67Ca0.33MnO3:NiO and La0.67Ca0.33MnO3:Co3O4 Composite Films via Polymer-Assisted Deposition Reviewed International coauthorship Open Access

Meng Zhou, Yuling Li, Il Jeon, Qinghua Yi, Xuebin Zhu, Xianwu Tang, Haiyan Wang, Ling Fei, Yuping Sun, Shuguang Deng, Yutaka Matsuo, Hongmei Luo, Guifu Zou

Scientific Reports Vol. 6 page： 26390 2016.7

Electrochemical Reduction of Cationic Li+@C60 to Neutral Li+@C60•–: Isolation and Characterisation of Endohedral [60]Fulleride Reviewed Open Access

Hiroshi Ueno, Shinobu Aoyagi, Yu Yamazaki, Kei Ohkubo, Naohiko Ikuma, Hiroshi Okada, Tatsuhisa Kato, Yutaka Matsuo, Shunichi Fukuzumi, Ken Kokubo

Chemical Science Vol. 7 page： 5770 - 5774 2016.6

　 PREV - NEXT 　

<MATSUO Yutaka>

Papers - MATSUO Yutaka