講演・口頭発表等 - 加藤 準治
-
Optimization of fiber orientation and location for 3D-printing FRP 国際会議
Takahito Moribe,Hiroya Hoshiba,Junji Kato
COMPSAFE2020 2020年12月10日
-
Multi-material topology optimization considering strength of materials and interfaces 国際会議
Daiki Watanabe,Hiroya Hoshiba,Junji Kato
COMPSAFE2020 2020年12月10日
-
Topology optimization to improve structural strengt for additive manufacturing 国際会議
Junji Kato
ACSMO2020(Asian Congress of Structural and Multidisciplinary Optimization 2020) 2020年11月23日 ASSMO
-
Multiscale topology optimization for heat conduction and transfer in porous media 国際会議
Sululthanasorn Naruethep,Hiroya Hoshiba,Mao Kurumatani,Junji Kato and Kenjiro Terada
ACSMO2020(Asian Congress of Structural and Multidisciplinary Optimization 2020) 2020年11月25日 ASSMO
-
積層造形を念頭においたトポロジー最適設計
加藤準治
2020年度 日本機械学会年次大会
-
三相材料モデルによるラティス構造のトポロジー最適化設計
田邉 雄太(東京理科大学),牛島 邦晴(東京理科大学),加藤 準治
第25回計算工学講演会
-
多孔質材料の熱伝導及び熱伝達に関するミクロ構造のトポロジー最適化
スクルタナソーン ナルテープ(名古屋大学),干場 大也(名古屋大学),車谷 麻緒(茨城大学),加藤 準治,寺田 賢二郎(東北大学)
第25回計算工学講演会
-
建設3Dプリンターを念頭においたトポロジー最適設計法の開発
松井 聖圭(名古屋大学工学部),鎌田 浩基(東北大学),干場 大也(名古屋大学工学部工学研究科),加藤 準治
第25回計算工学講演会
-
エネルギー散逸制御を目的とした粘弾性材料のトポロジー最適化
干場 大也(名古屋大学),高橋 寛成(同大)、加藤 準治
第25回計算工学講演会
-
3D-printing FRPの機械的性能評価および数値シミュレーション
森部 天仁(名古屋大学大学院工学研究科土木工学専攻),干場 大也(同大),加藤 準治
第25回計算工学講演会
-
材料強度を考慮した熱-構造連成マルチマテリアルトポロジー最適化
渡邉 大貴(名古屋大学)、干場 大也(名古屋大学)、加藤 準治
第25回計算工学講演会
-
コンクリート構造の損傷解析に基づく感度解析アルゴリズムの提案
水鳥智幸,干場大也,加藤準治
第23回応用力学シンポジウム
-
トポロジー最適化による粘弾性複合構造の動的コンプライアンス制御
高橋寛成,干場大也,加藤準治
第23回応用力学シンポジウム
-
3D-printing FRPの機械的性能評価および数値解析モデルの検討
森部天仁,干場大也,加藤準治
第23回応用力学シンポジウム
-
コンクリート補強材を想定した周期的なCFRP構造の最適設計
松井聖圭,干場大也,加藤準治
第23回応用力学シンポジウム
-
Finite thermo-elastic decoupled two-scale analysis 国際会議
R. Fleischhauer,J.Kato,K.Terada,M.Kaliske,
The Asian Pacific Congress on Computational Mechanics (APCOM2019)
-
Stress constraints for weight reduction by multi-material topology optimization under thermo-elastic behavior 国際会議
D.Watanabe,J.Kato,T.Kyoya,
The Asian Pacific Congress on Computational Mechanics (APCOM2019)
-
Optimal Design of Lattice Structure Considering Constraints through Additive Manufacturing Process 国際会議
Y.Koike,K.Ushijima and J.Kato
Proc. of II International Conference on Simulation for Additive Manufacturing (Sim-AM2019)
-
Multi-material optimization for future products by additive manufacturing to minimize dynamic structural response 国際会議
T.Endo,H.Hoshiba,J.Kato
Proc. of II International Conference on Simulation for Additive Manufacturing (Sim-AM2019)
-
Simplified approach of topology optimization for improving structural strength 国際会議
H.Kamada,J.Kato
Proc. of II International Conference on Simulation for Additive Manufacturing (Sim-AM2019)