Papers - HAYASAKA Takehiro

"L-stock method" - High-efficiency high-chatter-stability high-precision thin-wall milling strategy with aggressive use of plunge milling Reviewed International journal

Hayasaka, T; Miyagawa, K; Lee, K; Saito, A; Shamoto, E

CIRP ANNALS-MANUFACTURING TECHNOLOGY   Vol. 73 ( 1 ) page： 289 - 292   2024.5

　More details

Authorship：Lead author,　Corresponding author   Language：English   Publishing type：Research paper (scientific journal)  

DOI： 10.1016/j.cirp.2024.04.085

Web of Science

Proposal of 'ImpEC (impact excitation cutting)' for realization of high-flexibility and high-efficiency micro/nano surface texturing Reviewed

Hayasaka Takehiro, Sun Pinzhang, Jung Hongjin, Mizutani Yudai, Shamoto Eiji

CIRP ANNALS-MANUFACTURING TECHNOLOGY   Vol. 70 ( 1 ) page： 41 - 44   2021.6

　More details

Authorship：Lead author   Language：English   Publishing type：Research paper (scientific journal)  

DOI： 10.1016/j.cirp.2021.04.023

Web of Science

Proposal of novel spindle speed variation profile with constant acceleration rate for improvement of chatter stability Reviewed

Nam Soohyun, Hayasaka Takehiro, Jung Hongjin, Shamoto Eiji

PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY   Vol. 68   page： 218 - 234   2021.3

　More details

Language：English   Publishing type：Research paper (scientific journal)  

DOI： 10.1016/j.precisioneng.2020.12.008

Web of Science

A lightweight interpolation algorithm for short-segmented machining tool paths to realize vibration avoidance, high accuracy, and short machining time

Hayasaka Takehiro, Minoura Kazuaki, Ishizaki Kousuke, Shamoto Eiji, Sencer Burak

PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY   Vol. 59   page： 1 - 17   2019.9

　More details

Language：English   Publishing type：Research paper (scientific journal)  

DOI： 10.1016/j.precisioneng.2019.05.006

Web of Science

Consolidated chatter stability prediction model considering material removing and ploughing processes

Hayasaka Takehiro, Jung Hongjin, Azuma Kensuke, Shamoto Eiji

PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY   Vol. 59   page： 120 - 133   2019.9

　More details

Language：English   Publishing type：Research paper (scientific journal)  

DOI： 10.1016/j.precisioneng.2019.06.006

Web of Science

Regenerative chatter by teeth allocated in the cutting direction with position-dependent modal displacement ratios Reviewed International coauthorship

Hayasaka Takehiro, Xu Yang, Jung Hongjin, Shamoto Eiji, Xu Liangji

CIRP ANNALS-MANUFACTURING TECHNOLOGY   Vol. 68 ( 1 ) page： 409 - 412   2019.4

　More details

Authorship：Lead author,　Corresponding author   Language：English   Publishing type：Research paper (scientific journal)  

DOI： 10.1016/j.cirp.2019.04.003

Web of Science

Proposal of 'accelerative cutting' for suppression of regenerative chatter Reviewed

Hayasaka T, Nam S, Jung H, Shamoto E, Saito K

CIRP Annals - Manufacturing Technology   Vol. 67 ( 1 ) page： 401-404   2018.5

　More details

Authorship：Lead author   Language：English   Publishing type：Research paper (scientific journal)  

Mechanism and suppression of frictional chatter in high- efficiency vibration cutting Reviewed

Hongjin Jung, Takehiro Hayasaka, Eiji Shamoto

CIRP Annals - Manufacturing Technology   Vol. 65 ( 1 ) page： 369-372   2016.4

　More details

Language：English   Publishing type：Research paper (scientific journal)  

DOI： http://dx.doi.org/10.1016/j.cirp.2016.04.103

Study on Extraordinarily High-Speed Cutting Mechanics and Its Application to Dry Cutting of Aluminum Alloys with Non-Coated Carbide Tools Reviewed International coauthorship

Journal of Manufacturing and Materials Processing   Vol. 8 ( 198 ) page： 1 - 22   2024.9

　More details

Authorship：Corresponding author   Language：English   Publishing type：Research paper (scientific journal)  

DOI： https://doi.org/10.3390/jmmp8050198

DOI： https://doi.org/10.3390/jmmp8050198

Novel real-time monitoring method of depths of cut and runout for milling process utilizing FFT analysis of cutting torque Reviewed

Kyungki Lee, Takehiro Hayasaka, Eiji Shamoto

Precision Engineering   Vol. 81   page： 36 - 49   2023.5

　More details

Language：English   Publishing type：Research paper (scientific journal)  

Proposal of novel chatter-free milling strategy utilizing extraordinarily numerous flute endmill and high-speed high-power machine tool Reviewed

Jun Eto, Takehiro Hayasaka, Eiji Shamoto

Precision Engineering   Vol. 80   page： 95 - 103   2023.3

　More details

Authorship：Corresponding author   Language：English   Publishing type：Research paper (scientific journal)  

Novel rotational center self-identification of machine tool by utilizing multiple tool-workpiece contacts with redundant-axis movement Reviewed

Lee Kyungki, Hayasaka Takehiro, Nam Soohyun, Shamoto Eiji

PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY   Vol. 79   page： 185 - 189   2023.1

　More details

Authorship：Corresponding author   Language：English   Publishing type：Research paper (scientific journal)  

DOI： 10.1016/j.precisioneng.2022.09.012

Web of Science

"Multimode vibration cutting"-A new vibration cutting for highly-efficient and highly-flexible surface texturing Reviewed

Jung Hongjin, Hayasaka Takehiro, Shamoto Eiji, Ishii Hiroaki, Ueyama Takashi, Hamada Seiji

PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY   Vol. 72   page： 111 - 121   2021.11

　More details

Language：English   Publishing type：Research paper (scientific journal)  

DOI： 10.1016/j.precisioneng.2021.04.003

Web of Science

Unique regenerative chatter in wiper-turning operation with burnishing process Part 2: Experimental verification of predicted generation mechanism, critical stability, and characteristics Reviewed

Hirose Mitsunori, Hayasaka Takehiro, Shamoto Eiji

PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY   Vol. 71   page： 313 - 323   2021.9

　More details

Language：English   Publishing type：Research paper (scientific journal)  

DOI： 10.1016/j.precisioneng.2020.05.012

Web of Science

Unique regenerative chatter in wiper-turning operation with burnishing process Part 1: Prediction and analytical investigation of generation mechanism, critical stability, and characteristics Reviewed

Hirose Mitsunori, Hayasaka Takehiro, Shamoto Eiji

PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY   Vol. 71   page： 304 - 312   2021.9

　More details

Language：English   Publishing type：Research paper (scientific journal)  

DOI： 10.1016/j.precisioneng.2020.05.011

Web of Science

Analytical Prediction of Chatter Stability for Modulated Turning Reviewed International coauthorship

Nam S, Eren B, Hayasaka T, Sencer B, Shamoto E

International Journal of Machine Tools and Manufacture   Vol. 165 ( 2021 ) page： 103739 - 103739   2021.5

　More details

Language：English   Publishing type：Research paper (scientific journal)  

High-efficiency smooth-surface high-chatter-stability machining of thin plates with novel face-milling cutter geometry Reviewed

Itoh Masatoshi, Hayasaka Takehiro, Shamoto Eiji

PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY   Vol. 64   page： 165 - 176   2020.7

　More details

Authorship：Corresponding author   Language：English   Publishing type：Research paper (scientific journal)  

DOI： 10.1016/j.precisioneng.2020.03.024

Web of Science

Suppression of forced vibration due to chip segmentation in ultrasonic elliptical vibration cutting of titanium alloy Ti-6Al-4V Reviewed International coauthorship

Jung Hongjin, Hayasaka Takehiro, Shamoto Eiji, Xu Liangji

PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY   Vol. 64   page： 98 - 107   2020.7

　More details

Language：English   Publishing type：Research paper (scientific journal)  

DOI： 10.1016/j.precisioneng.2020.03.017

Web of Science

Novel geometrical design of turning inserts for high-efficiency smooth-surface high-chatter-stability cutting Reviewed

Itoh Masatoshi, Hayasaka Takehiro, Shamoto Eiji

PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY   Vol. 64   page： 138 - 146   2020.7

　More details

Authorship：Corresponding author   Language：English   Publishing type：Research paper (scientific journal)  

DOI： 10.1016/j.precisioneng.2020.03.018

Web of Science

Proposal of novel chatter stability indices of spindle speed variation based on its chatter growth characteristics Reviewed

Soohyun Nam, Takehiro Hayasaka, Hongjin Jung, Eiji Shamoto

Precision Engineering   Vol. 62 ( 1 ) page： 121 - 133   2020.3

　More details

Language：English   Publishing type：Research paper (scientific journal)  

DOI： 10.1016/j.precisioneng.2019.11.018

Web of Science

Proposal of "Curved-Profile Wiper Turning" for efficient, stable, and smooth finishing Reviewed

Fujimaki Shunsuke, Shibayama Teruki, Hayasaka Takehiro, Shamoto Eiji

PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY   Vol. 61   page： 152 - 159   2020.1

　More details

Language：English   Publishing type：Research paper (scientific journal)  

DOI： 10.1016/j.precisioneng.2019.09.014

Web of Science

Study on Process Monitoring of Elliptical Vibration Cutting by Utilizing Internal Data in Ultrasonic Elliptical Vibration Device Reviewed

Jung Hongjin, Hayasaka Takehiro, Shamoto Eiji

INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING-GREEN TECHNOLOGY   Vol. 5 ( 5 ) page： 571-581   2018.10

　More details

Language：English   Publishing type：Research paper (scientific journal)  

DOI： 10.1007/s40684-018-0059-9

Web of Science

Generalized design method of highly-varied-helix end mills for suppression of regenerative chatter in peripheral milling

Hayasaka Takehiro, Ito Atsushi, Sharnoto Eiji

PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY   Vol. 48   page： 45-59   2017.4

　More details

Language：English   Publishing type：Research paper (scientific journal)  

DOI： 10.1016/j.precisioneng.2016.11.004

Web of Science

Optimization Problem for the Feasibility Evaluation of Schedules Considering Blocking Reviewed

Takehiro Hayasaka, Rei Hino

Journal of Advanced Mechanical Designs, Systems, and Manufacturing   Vol. 10 ( 2 ) page： JAMDSM0016   2016.4

　More details

Authorship：Lead author   Language：English   Publishing type：Research paper (scientific journal)  

DOI： http://doi.org/10.1299/jamdsm.2016jamdsm0016

バッファ無しジョブショップスケジューリング問題に対する複数仕事の同時処理順序変更（ガントチャート上の不整合に着目した仕事の選択） Reviewed

早坂健宏、樋野励、社本英二

日本機械学会論文集（C編 ）   Vol. 79 ( 806 ) page： 3951-3964   2013

　More details

Authorship：Lead author   Language：Japanese   Publishing type：Research paper (scientific journal)  

Multiple Exchanges of Job Orders for No-Buffer Job Shop Scheduling Problem Reviewed

Takehiro Hayasaka, Rei Hino

Journal of Advanced Mechanical Design, System, and Manufacturing     2012

　More details

Authorship：Lead author   Language：English   Publishing type：Research paper (scientific journal)  

DOI： https://doi.org/10.1299/jamdsm.6.661