Faculty Profiles - MORISAKI Shuji

Papers - MORISAKI Shuji

Division display >> ／ All the affair displays 1 - 82 of about 82

Efficient validation process of architecture designs based on customer needs for earth observation constellation satellite systems Reviewed

H. Umeda, T. Kobayashi, S.Takatsuki, Y. Ueda, S. Morisaki

Proceedings of the 10th IEEE International Symposium on Systems Engineering page： 1 - 10 2024.10

Extended Association Rule Mining and Its Application to Software Engineering Data Sets Reviewed

H. Saito, K. Nishiura, A. Monden, S. Morisaki

International Journal of Software Engineering and Knowledge Engineering Vol. 0 ( 0 ) page： 1 - 22 2024.8

LAPACKを用いた固有値計算におけるテストシーケンスの最適化

樫村寛大,森崎修司,片桐孝洋,河合直聡,永井亨,星野哲也

第86回情報処理学会全国大会 Vol. 5K-02 page： 1 - 2 2024.3

Assessing Critical Adaptations in Automated Adaptive Software Systems by Stage Decomposition Invited Reviewed

S. Morisaki, M. Wakimoto, N. Kasai

IEEE Access Vol. 12 page： 17859 - 17875 2024.2

Authorship：Lead author,　Corresponding author Language：English Publishing type：Research paper (scientific journal) Publisher：IEEE Access

In environments involving a variety of connected devices and systems, there is an ever-increasing demand for automated adaptation. To ensure that all threats are identified and manageable in such environments, quality assurance activities including testing and inspections in design-time should focus on assessing the reliability of critical adaptations, which may threaten life, economic property, or important information. This work proposes an approach for identifying and evaluating critical adaptations on the basis of their automation level, reliability, detectability, and recoverability by decomposing adaptations into four stages: monitor, analyze, plan, and execute. This work also empirically evaluates the effectiveness of the proposed approach by assessing a real safety-critical telecommunication system with critical adaptation features and comparing the results with the STAMP (System Theoretic Accident Model and Processes)/STPA (System-Theoretic Process Analysis) approach. The results of the evaluation indicated that the proposed approach could assess critical adaptation features provided by the system with reasonable effort. Additionally, structured views provided by the proposed approach enable efficient quality assurance activities. In the evaluation, the proposed approach achieves similar results to the STAMP/STPA approach but requires 33% less effort.

DOI： 10.1109/ACCESS.2024.3360275

Web of Science

Scopus

STAMP/STPAとイベントシーケンス図を用いた複数コントローラが協調するシステムにおけるハザード対策の検討支援手法の提案 Reviewed

髙附翔馬,梅田浩貴,植田泰士氏, 片平真史, 森崎修司

ソフトウェア品質シンポジウム2023発表報文集 page： 1 - 8 2023.9

Identifying Defect Injection Risks from Analysis and Design Diagrams: An Industrial Case Study at Sony Reviewed

Y. Imanishi, K. Kumon, S. Morisaki

2023 IEEE/ACM 45th International Conference on Software Engineering, ICSE-SEIP page： 420 - 431 2023.5

Authorship：Last author,　Corresponding author Language：English Publishing type：Research paper (international conference proceedings) Publisher：Proceedings - International Conference on Software Engineering

Identifying the origins of potentially injected defects in implementation activities during requirement analysis and design activities is challenging, but leads to the prevention of defects, which are burdensome to correct. This study investigates whether such defect injection risks can be generalized and defined by risk occurrence conditions of the objects in the existing analysis and design diagrams and whether the defined defect injection risks are applicable to other analysis and design diagrams. Specifically, we identify defect categories, which are injected after analysis and design activities and subsequently detected during system testing of commercial products developed at Sony. Then, regarding the defect categories as the exposed defect injection risks, we define defect injection risks with the objects defined in the analysis and design diagrams of the products. Each defect injection risk consists of risk description, diagram type, and occurrence conditions of objects in the diagrams. Afterwards, we evaluate whether the defined defect injection risks appear in the analysis and design diagrams of three different products under development and five publicly available analysis and design diagrams. The results showed that three defect injection risks were defined and that the two risks appear in the analysis and design diagrams of the three products and the remaining one appears in the analysis and design diagrams of two products. The results also showed that one defect injection risk is present in all five publicly available analysis and design diagrams, and two risks appear in four of the diagrams. The three defect injection risks are general enough to identify risks in analysis and design diagrams from other domains. Developers can be more cautious about the risks and prevent defect injections with the defect injection risks.

DOI： 10.1109/ICSE-SEIP58684.2023.00044

Web of Science

Scopus

探索的テストの「気づき」に基づきプロダクトバックログの書き方の改善点を導出する手法 Reviewed

谷﨑浩一,田上諭,森龍二,蛭田恭章,森崎修司

ソフトウェアプロセス改善カンファレンス 2022 2022.10

STAMP/STPAとシーケンス図を用いたコントローラ間の相互作用があるシステムにおける安全設計手法の提案 Reviewed

髙附翔馬,梅田浩貴 ,植田泰士, 片平真史,森崎修司

ソフトウェア品質シンポジウム2022 発表報文集 page： 1 - 8 2022.9

A Metric for Questions and Discussions Identifying Concerns in Software Reviews Reviewed

Michiyo Wakimoto,Shuji Morisaki

MDPI Software Vol. 1 ( 3 ) page： 364 - 380 2022.8

サイバーフィジカルシステムのシミュレーションテストの属性を用いたdefect-proneモジュール予測

塚本悠乃,森崎修司

日本ソフトウェア科学会第 39 回大会 (2022 年度) 講演論文集 page： 1 - 6 2022.8

Goal-oriented Software Design Reviews Reviewed

Michiyo Wakimoto, Shuji Morisaki

IEEE Access Vol. 10 page： 32584 - 32594 2022.3

過去のテスト目的を利用した仕様レビュー手法

谷崎浩一, 田上諭, 蛭田恭章, 森龍二, 森崎修司

情報処理学会研究報告ソフトウェア工学 Vol. 2022-SE-210 page： 1 - 8 2022.3

IoT Security-Quality-Metrics Method and Its Conformity with Emerging Guidelines Reviewed

Kosuke Ito, Shuji Morisaki, Atsuhiro Goto

Journal on Internet of Things (IoT) Vol. 2 ( 4 ) page： 761 - 785 2021.12

Test Case Design Method for Verification of Robustness in Embedded Systems Reviewed

Hiroki Umeda, Kazuhiro Oguchi, Shuji Morisaki

Proceedings of 11th International Association for the Advancedment of Space Safety page： 1 - 8 2021.10

閉ループ制御システムに対する異常シナリオ分析のための情報検索 Reviewed

小口一浩, 梅田浩貴, 植田泰士, 片平真史, 森崎修司

ソフトウェア品質シンポジウム2021発表報文集 page： 1 - 8 2021.9

ソフトウェアドキュメントとバグ報告における単語の出現数比較と共起によるバグ集中箇所の予測 Reviewed

山内泉水,森崎修司

ソフトウェアエンジニアリングシンポジウム2021論文集 page： 167 - 174 2021.9

Automated detection of game loop implementation by the nest depth and number of iterations

MORISAKI Shuji, KANAMORI Koyo

Computer Software Vol. 38 ( 2 ) page： 2_46 - 2_52 2021.5

Language：Japanese Publisher：Japan Society for Software Science and Technology

<p>Game loops in the existing source code must be identified prior to updating, adding, or modifying game rules or game objects in games software. This paper proposes a static analysis method predicting game loop candidates with likelihood ranks by focusing on the characteristics of game loops. The proposed method is evaluated with ten publicly available games in Github. For eight of the games, actual game loops were predicted: five had an actual game loop listed at the top of the candidates, while the other three had an actual game loop within the top 11 results.</p>

DOI： 10.11309/jssst.38.2_46

Scopus

An Evaluation of Value-Oriented Review for Software Requirements Specification

Zhi Qiang, Morisaki Shuji

COMPUTER SYSTEMS SCIENCE AND ENGINEERING Vol. 37 ( 3 ) page： 443 - 461 2021.3

Language：Japanese Publisher：Computer Systems Science and Engineering

A software requirements specification (SRS) is a detailed description of a software system to be developed. This paper proposes and evaluates a lightweight review approach called value-oriented review (VOR) to detect defects in SRS. This approach comprises setting core values based on SRS and detecting the defects disturbing the core values. To evaluate the effectiveness of the proposed approach, we conducted a controlled experiment to investigate whether reviewers could identify and record the core values based on SRS and find defects disturbing the core values. Results of the evaluation with 56 software engineers showed that 91% of the reviewers identified appropriate core values and 82% of the reviewers detected defects based on the identified core values. Furthermore, the average number of defects detected using the proposed approach was slightly smaller than that detected using perspective-based reading (PBR); however, PBR requires defining review scenarios before attempting to detect any defects. The results also demonstrated that the proposed approach helped reviewers detect the omission defects, which are more difficult to detect from SRS than defects because of ambiguity or incorrect requirements.

DOI： 10.32604/csse.2021.015157

Web of Science

Scopus

An Evaluation of Value-Oriented Review for Software Requirements Specification Reviewed International coauthorship

Q. Zhi, S. Morisaki

Computer Systems Science and Engineering Vol. 37 ( 3 ) page： 443 - 461 2021.3

ソフトウェアドキュメントとバグ報告における単語の出現数比較によるバグ集中箇所の予測

山内泉水, 森崎修司

情報処理学会研究報告ソフトウェア工学 Vol. 2021-SE-207 ( 29 ) page： 1 - 8 2021.3

テスト項目作成時のテストベース理解戦略の分析

佐々木方規, 森崎修司

情報処理学会研究報告ソフトウェア工学 Vol. 2021-SE-207 ( 38 ) page： 1 - 6 2021.3

A Goal-Oriented Approach to Requirements Development and Quantitative Security Assurance Reviewed International coauthorship

Z. Zhou, Q. Zhi, Z. Liang, S. Morisaki

International Journal of Systems and Software Security and Protection Vol. 12 ( 1 ) page： 46 - 62 2021.1

A Composite Safety Assurance Method for Developing System Architecture Using Model Checking Reviewed International coauthorship

Q. Zhi, Z. Zhou, S. Morisaki

International Journal of Systems and Software Security and Protection Vol. 12 ( 1 ) page： 78 - 93 2021.1

An assurance case approach for software code security

Miyabayashi R., Atsumi N., Morisaki S., Yamamoto S.

CEUR Workshop Proceedings Vol. 2809 page： 5 - 9 2021

Language：Japanese Publisher：CEUR Workshop Proceedings

The vulnerability of the security of the software codes has often caused by invalid input. Therefore, software security greatly depends on the safety of module inputs. In this paper, we propose a method to ensure the code security by building Assurance cases based on the relationship between input specifications and code portions of each module. In addition, a case study is accomplished to apply the proposed method for the published vulnerability of an OSS. The result shows that the method can detect the vulnerability of the OSS by the absence of necessary evidence in the developed assurance case based on the input specifications and portions of the OSS code.

Scopus

FMEA Focusing on the Interaction Between Physical and Computational Elements in Cyber-Physical Systems Reviewed

Umeda, H; Namihira, K; Okubo, N; Ueda, Y; Morisaki, S; Katahira, M

67TH ANNUAL RELIABILITY & MAINTAINABILITY SYMPOSIUM (RAMS 2021) Vol. 2021-May page： 1 - 7 2021

Language：Japanese Publishing type：Research paper (international conference proceedings) Publisher：Proceedings - Annual Reliability and Maintainability Symposium

This paper proposes an extended Failure Mode and Effect Analysis (FMEA) method to capture the interaction between physical and computational elements. Autonomous control of Cyber-Physical Systems (CPS), such as launch vehicle and spacecraft, has the interaction of physical and computational elements. Therefore, it is important to analyze failure scenarios caused by the interaction between physical and computational elements. When analysts accurately capture and analyze dynamic behaviors such as state changes and interaction during and after a failure as a failure scenario, the failure scenario promotes an accurate understanding of system failure and effects, helps appropriate design improvements. However, it is not easy to analyze CPS's failure scenarios involving many factors using conventional FMEA, which is because FMEA focuses on each element. The proposed method sequentially identifies failure modes and failure scenarios for combinations of elements using three models. The first model is the input-output Structural Model (SM), which identifies specifications that have interaction between physical and computational elements. The second model is Tree Model extended from Goal Structuring Notation (GSN), which supports analysis in guiding combinations of conditions from the perspective of a system's hierarchy. The third is a sequence model that shows failure scenarios, and Event Sequence Diagram (ESD) visualizes the state transitions of elements, including the passage of time. As a result of applying the proposed method to four CPS spacecraft systems, the number of failure modes, including the interaction between physical and computational elements, increased 2 to 8 times that when using conventional FMEA worksheets and guidewords about Hazard and Operability Study (HAZOP).

DOI： 10.1109/RAMS48097.2021.9605746

Web of Science

Scopus

自然言語処理による情報検索を用いた故障発想支援の提案 Reviewed

梅田浩貴,波平晃佑,植田泰士,片平真史,森崎修司

ソフトウェア品質シンポジウム2020発表報文集 page： B2-1_1-8 2020.9

システムロバスト性向上のためのモデル検査による検証手法の提案と宇宙機搭載FPGAへの適用事例 Invited Reviewed

梅田浩貴,倉林翔,小口一浩,植田泰士,片平真史,早水公二,森崎修司

ソフトウェアエンジニアリングシンポジウム2020論文集 page： 32 - 41 2020.9

アジャイル開発に適した品質チェック項目の作成手法 Reviewed

谷崎浩一, 田上諭,森龍二, 蛭田恭章,森崎修司

ソフトウェアエンジニアリングシンポジウム2020論文集 page： 88 - 96 2020.9

アジャイル開発に適した品質チェック項目の構造化 Reviewed

谷崎浩一, 田上諭,森龍二, 蛭田恭章,森崎修司

ソフトウェア品質シンポジウム2020発表報文集 page： B1-1_1-8 2020.9

An Investigation on Maintainability of Update Methods in Game Loops Reviewed

K. Kanamori, S. Morisaki, S. Yamamoto

Vol. 12 ( 1 ) page： 1 - 12 2020.7

A Systematic Literature Review on Enterprise Architecture Visualization Methodologies Reviewed International coauthorship

Z. Zhou, Q. Zhi, S. Morisaki, S. Yamamoto

IEEE Access Vol. 8 page： 96404 - 96427 2020.5

A Method to Remove Extraneous Words in Defect Log by Using Common Vocabulary Reviewed

S. Morisaki, M. Nishiguchi, T. Yonemitsu, A. Motoyama

page： 1-7 2020.4

An Evaluation of Quantitative Non-Functional Requirements Assurance Using ArchiMate Reviewed International coauthorship

Z. Zhou, Q. Zhi, S. Morisaki, S. Yamamoto

IEEE Access Vol. 8 page： 72395 - 72410 2020.4

Tool Supported Detection of Omissions by Comparing Words between Requirements and Design Document Reviewed

T. Wakabayashi, S. Morisaki, N. Kasai, N. Atsumi, S. Yamamoto

Journal of Information Processing Vol. 28 page： 136-149 2020.2

IMAF: A Visual Innovation Methodology Based on ArchiMate Framework Reviewed

Z. Zhou, Q. Zhi, S. Morisaki, S. Yamamoto

International Journal of Enterprise Information Systems Vol. 16 ( 1 ) page： 31-52 2020.1

Assurance case review using System Theory Reviewed

S. Yamamoto, S. Morisaki

International Journal of Japan Association for Management Systems Vol. 11 ( 1 ) page： 35-40 2019.12

ネストの深さと繰り返し回数に着目したゲームループの実装ソースコードの検出 Reviewed

金森公洋,森崎修司,山本修一郎

ソフトウェア工学の基礎XXVI page： 133-138 2019.11

相関関数を扱うアソシエーションルールの提案とソフトウェア開発データへの適用 Reviewed

齊藤英和, 門田暁人, Z. Yucel, 森崎修司

コンピュータソフトウェア Vol. 36 ( 3 ) page： 47-53 2019.9

リスクシナリオに繋がるコンテキスト情報を抽出するレビューメタモデルの提案 Reviewed

梅田浩貴,波平晃佑,植田泰士,片平真史,森崎修司

ソフトウェア品質シンポジウム2019発表報文集 page： A1-1_1-8 2019.9

ARM Analysis Case Study: Digital Indian Health Care System Business Model and Review Reviewed

N. Olayan, S. Morisaki, S. Yamamoto

ACTA Scientific Medical Sciences Vol. 3 ( 9 ) page： 77-85 2019.8

An Approach for Requirements Elicitation Using Goal, Question, and Answer Reviewed

Q. Zhi, Z. Zhou, S. Morisaki, S. Yamamoto

Proc. of 4th International Conference on Enterprise Architecture and Information Systems 2019 page： 847-852 2019.7

A Method of Knowledge Sharing for Controlling Hardware in Automotive Software Development Reviewed

K. Hayashi, M. Daida, N. Kobayashi, K. Fujimoto, S. Morisaki, S. Yamamoto

Proc. of the 8th International Congress on Advanced Applied Informatics 2019 page： 843-846. 2019.7

A Proposal for Developing EA Models toward Innovation Reviewed

Z. Zhou, Q. Zhi, S. Yamamoto, S. Morisaki

Proc of the 8th International Congress on Advanced Applied Informatics 2019 2019.7

Detecting Source Code Hotspot in Games Software Using Call Flow Analysis Reviewed

S. Morisaki, N. Kasai, K. Kanamori, S. Yamamoto

Proc. of 20th IEEE/ACIS International Conference on Software Engineering, Artificial Intelligence, Networking and Parallel/Distributed Computing 2019 page： 484-489 2019.7

A Case Study of Requirements Ambiguities and Goal-oriented Focused Requirements Specification Reviewed

M. Wakimoto, S. Morisaki, S. Yamamoto

Proc. of 4th International Conference on Enterprise Architecture and Information Systems 2019 page： 908-913 2019.7

A Study Toward Quality Metrics for IoT Device Cybersecurity Capability Reviewed

K. Ito, S. Morisaki, A. Goto

Proc. of ISA Asia-Pacific Conference 2019 page： 1-8 2019.4

Modeling Insights on Best Practices in System-Level Software FMEA for the Novice Training Reviewed

N. Okubo, K. Namihira, H. Umeda, S. Morisaki

Proc. of 66th Annual Reliability and Maintainability Symposium page： 1-8 2019.1

An Approach for Detecting Critical Adaptations in Automated Adaptive Software Systems Reviewed

Shuji Morisaki, Norimitsu Kasai

In Proc. of 2018 IEEE International Conference on Software Quality, Reliability and Security Companion (QRS-C) page： 526-530. 2018.7

A Proposal on a Method of ArchiMate based Concept of Operation (ConOps) Reviewed

N. Olayan, S. Morisaki, N. Kobayashi, S.Yamamoto

International Journal of Computer Science and Information Security Vol. 16 ( 1 ) page： 132-138 2018.1

実践的保証ケース作成方式 Reviewed

山本修一郎、森崎修司、渥美紀寿

Vol. 13 ( 1 ) page： 24-31 2017.7

An Approach for Validating Assurance Case by Using Component Evidence Matrix Reviewed

S. Morisaki, M. Matsumura, N. Atsumi, S. Yamamoto

International Journal of Computer Science and Information Security Vol. 15 ( 5 ) page： 314-325 2017.5

An Empirical Evaluation of Detecting Omissions by Comparing Words between Requirement and Architectural Documents Reviewed

Takehiro Wakabayashi,Shuji Morisaki,Noritoshi Atsumi,Shuichiro Yamamoto

Proceedings of The 8th IEEE International Workshop on Empirical Software Engineering in Practice page： 1-6 2017.3

継続的リリースを前提とした要求の優先順位付けのための軽量見積り手法

森崎修司,小川健太郎,山口鉄平,高口鉄平

情報処理学会研究報告ソフトウェア工学研究会 Vol. 2017-SE-195 ( 23 ) page： 1-7 2017.3

自動翻訳された日本語バグレポートを用いたバグ局所化の試行

上杉正紀，森崎修司，渥美紀寿，山本修一郎

情報処理学会第79回全国大会講演論文集 page： 1-254 2017.3

D-Caseを用いた安全分析結果の説明手法の提案 Reviewed

小林展英,森崎修司,山本修一郎

情報処理学会論文誌 Vol. 58 ( 2 ) page： 521-530 2017.2

バリアントコードの改変履歴に基づく前処理条件の構造に関する特徴調査 Reviewed

今西洋二，渥美紀寿，森崎修司，山本修一郎，阿草清滋

ソフトウェア工学の基礎XXIII page： 115-120 2016.12

クラウドソーシングサービスにおける機能価値の評価

高口鉄平,森崎修司,小川健太郎,石垣光香子

第35回情報通信学会大会 2016年度秋季 page： 1 2016.12

Identifying recurring association rules in software defect prediction Reviewed

Takashi Watanabe,Akito Monden,Yasutaka Kamei,Shuji Morisaki

Proceedings of The IEEE/ACIS 15th International Conference on The Computer and Information Science 2016 page： 26-29 2016.8

共通語彙によるソフトウェア設計書の評価にむけた分析 Reviewed

奈加大樹,森崎修司,渥美紀寿,山本修一郎

情報処理学会論文誌 Vol. 57 ( 5 ) page： 1464-1476 2016.5

逸脱分析を用いた要求仕様書からのテスト項目抽出手法 Reviewed

大林英晶, 森崎修司, 渥美紀寿, 山本修一郎

情報処理学会論文誌情報処理学会論文誌 Vol. 57 ( 4 ) page： 1262-1273 2016.4

保証ケースの先端研修教材の試作と評価

山本修一郎, 森崎修司, 渥美紀寿

人工知能学会第18回知識流通ネットワーク研究会 Vol. 18 ( 2 ) page： 1-6 2016.3

Quantitative Non Functional Requirements Evaluation Using Softgoal Weight Reviewed

N. Kobayashi, S. Morisaki, N. Atsumi, S. Yamamoto

Journal of Internet Services and Information Security Vol. 6 ( 1 ) page： 37-46 2016.2

GSNレビュ実験と評価について

山本修一郎, 森崎修司, 渥美紀寿, 近藤純平,大林英晶

人工知能学会第18回知識流通ネットワーク研究会 Vol. 18 ( 6 ) page： 1-6 2016.2

再現性のあるアソシエーションルールの選定

渡部恭史,門田暁人,亀井靖高,森崎修司

情報処理学会研究報告ソフトウェア工学研究会 Vol. 2015-SE-190 ( 9 ) page： 1-8 2015.12

目的設定がレビューシナリオに与える影響の分析

岡見健利,森崎修司,渥美紀寿,山本修一郎

情報処理学会研究報告ソフトウェア工学研究会 Vol. 2015-SE-190 ( 21 ) page： 1-8 2015.12

要求仕様書と設計書における語彙の差分に関する分析

若林丈紘,森崎修司,渥美紀寿,山本修一郎

情報処理学会研究報告ソフトウェア工学研究会 Vol. 2015-SE-190 ( 20 ) page： 1-8 2015.12

入力分析に基づくコード保証方法の提案

宮林凌太,渥美紀寿,森崎修司,山本修一郎

電子情報通信学会技術研究報告知能ソフトウェア工学研究会 Vol. 115 ( 281 ) page： 17-22 2015.10

An Empirical Evaluation of the Effectiveness of Inspection Scenarios Developed from a Defect Repository Reviewed

K. Kasubuchi, S. Morisaki, A. Yoshida and C. Ogawa

In Proceedings of the 2015 IEEE International Conference on Software Maintenance and Evolution page： 275-286 2015.9

ソフトウェア設計書と要求仕様書の共通語彙分析

奈加大樹,森崎修司,渥美紀寿,山本修一郎

人工知能学会知識流通ネットワーク研究会 Vol. 17 ( 1 ) page： 1-6 2015.9

構成情報に基づく保証ケースレビュ手法の提案

山本修一郎,森崎修司,渥美紀寿

人工知能学会知識流通ネットワーク研究会 Vol. 17 ( 3 ) page： 1-6 2015.9

モデルに基づく統一的保証ケース作成手法の提案

山本修一郎,森崎修司,渥美紀寿,正田稔

人工知能学会知識流通ネットワーク研究会 Vol. 17 ( 4 ) page： 1-6 2015.9

チェックリストを用いたコードレビューと判別モデルの組合せによるモジュールの不具合リスクのランク付け Reviewed

笠井則充,森崎修司,松本健一

SEC Journal Vol. 11 ( 2 ) page： 8-15 2015.9

A study of reading comprehension improvement technique of safety case with modules

Junpei Kondo, Shuji Morisaki, Shuichiro Yamamoto

IEICE technical report Vol. 114 ( 501 ) page： 37-42 2015.3

An Empirical Analysis toward Automated Software Document Evaluation by Abstraction Level of Included Words Reviewed

Shuji Morisaki,Mitsuru Endo,Takahiro Sugiyama

page： 0-8 2015.2

A Method to Design Exception Test Cases Reviewed

Shuichiro Yamamoto, Shuji Morisaki

Proceedings of 8th International Conference on Project Management page： 1-14 2014.12

CDM記述のためのコンテクスト抽出手法の能力比較

松村昌典,森崎修司,渥美紀寿,山本修一郎

電子情報通信学会技術研究報告 Vol. 114 ( 292 ) page： 13-18 2014.11

要求記述表を用いたテスト項目抽出手法の適用評価について

大林英晶,森崎修司,山本修一郎

電子情報通信学会技術研究報告 Vol. 114 ( 292 ) page： 43-46 2014.11

要求テンプレートを用いた要求分析法の調査

伊藤一希,近藤純平,下江衛,森崎修司,渥美紀寿,山本修一郎

電子情報通信学会技術研究報告 Vol. 114 ( 292 ) page： 37-42 2014.11

An Evaluation of Assuring Test Case Sufficiency Using a D-Case Pattern Reviewed

Shuichiro Yamamoto, Shuji Morisaki

IEEE International Symposium on Reliability Engineering Workshops page： 455-460 2014.11

ソフトウェア設計書における頻出単語の調査と共通語彙の分析

奈加大樹,森崎修司,渥美紀寿,山本修一郎

人工知能学会第15回知識流通ネットワーク研究会 page： 1-6 2014.9

コンテクスト依存表(CDM)に基づくD-Case作成法の提案

松村昌典,森崎修司,渥美紀寿,山本修一郎

人工知能学会第15回知識流通ネットワーク研究会 page： 1-6 2014.9

Fault-Prone Module Prediction Using a Prediction Model and Manual Inspection Reviewed

Norimitsu Kasai, Shuji Morisaki, Kenichi Matsumoto

In Proceedings of 20th Asia-Pacific Software Engineering Conference page： 106-115 2013.12

　 PREV - NEXT 　

<MORISAKI Shuji>

Papers - MORISAKI Shuji