Presentations -

直接接合用高効率低パーティクル高速原子ビーム源 Invited

秦　誠一

日本学術振興会第R032委員会 第19回研究会  2025.1.10  日本学術振興会第R032委員会

　More details

Event date： 2025.1

Language：Japanese   Presentation type：Symposium, workshop panel (nominated)  

Venue：名古屋大学   Country：Japan  

大口径基板接合に向けた高速原子ビーム源 Invited

秦誠一

2024年度応用物理学会秋季講演会  2024.9.17  応用物理学会

　More details

Event date： 2024.9

Language：Japanese   Presentation type：Symposium, workshop panel (nominated)  

Venue：新潟市朱鷺メッセ   Country：Japan  

The characteristics evaluation of Ni-Nb-Zr thin film amorphous alloys for ultrasonic sensor International conference

Jinglan Xie, Fuyuki, Haga, Chiemi Oka, Seiichi Hata, Junpei Sakurai

34th 2023 International Symposium on Micro-NanoMechatronics and Human Science (MHS2023)  2023.11.20  IEEE

　More details

Event date： 2023.11

Language：English   Presentation type：Oral presentation (general)  

Venue：Nagoya   Country：Japan  

Combinatorial search of new Ti-Ni-Hf high formable shape memory alloys International conference

Shin Inoue, Takahiro Yamazaki, Chiemi Oka, Seiichi Hata and Junpei Sakurai

32nd 2021 International Symposium on Micro-Nano Mechatronics and Human Science (MHS2021)  2022.12.7  IEEE

　More details

Event date： 2022.12

Language：English   Presentation type：Poster presentation  

Venue：Nagoya  

Effect of tactile pin height on driving characteristics using high formable shape-memory alloy for reaction force variable tactile displays International conference

(4) Masanori Murase, Keita Nambara, Chiemi Oka, Seiichi Hata, Junpei Sakurai

International Conference on Materials & Processing 2022 (ICM&P 2022)  2022.11.7  JSME

　More details

Event date： 2022.11

Language：English   Presentation type：Poster presentation  

Venue：Okinawa   Country：Japan  

Al addition to Fe- based nanocrystalline soft materials for large magnetostriction International conference

(5) Kohya Sano, Chiemi Oka, Junpei Sakurai, Takahiro Yamazaki, Seiichi Hata

International Conference on Materials & Processing 2022 (ICM&P 2022)  2022.11.7  JSME

　More details

Event date： 2022.11

Language：English   Presentation type：Oral presentation (general)  

Venue：Okinawa   Country：Japan  

Unidirectional pores using magnetic-nanoparticle-chain template

Atsuki Kobayashi, Junpei Sakurai, Hosei Nagano, Seiichi Hata, Chiemi Oka

11th International Conference on Fine Particle Magnetism (ICFPM2022)  2022.10.17 

　More details

Event date： 2022.10

Language：English   Presentation type：Poster presentation  

Venue：Yokohama  

Combinatorial Search for Chlorine Evolution Electrode Catalyst using Bayesian optimization International conference

Junpei Sakurai, Kimihiko Sugiura, Chiemi Oka, Seiichi Hata

11th International Workshop on Combinatorial Materials Science and Technology (COMBI2022)  2022.9.30 

　More details

Event date： 2022.9

Language：English   Presentation type：Oral presentation (general)  

Venue：Colorado   Country：United States  

Ti-Ni-Hf高成形性形状記憶合金のコンビナトリアル探索

井上 慎，岡智絵美，櫻井淳平，秦誠一

形状記憶合金協会 第11期定時総会  2021.3.12  形状記憶合金協会

　More details

Event date： 2021.3

Language：Japanese   Presentation type：Oral presentation (general)  

新規医療用Ti-Ni-Hf高成形性形状記憶合金のコンビナトリアル探索

井上 慎，岡智絵美，櫻井淳平，秦誠一

生体医歯工学共同研究拠点 令和2年度成果報告会  2021.3.5  生体医歯工学共同研究拠点

　More details

Event date： 2021.3

Language：Japanese   Presentation type：Oral presentation (general)  

Ti-Ni-Cu高成形性形状記憶合金を用いた，反力可変受動形触覚ディスプレイ用触知ピンの作製及び駆動評価

南原 圭汰，伊木 啓一郎，岡智絵美，櫻井淳平，秦誠一

第28回機械材料・材料加工技術講演会  2020.11.19  日本機械学会機械材料・材料加工部門

　More details

Event date： 2020.11

Language：Japanese   Presentation type：Oral presentation (general)  

逆リフトオフ法を用いた MEMS ミラーデバイスの作製

高瀬 駿，山田 恭平，中川 優希，岡智絵美，櫻井淳平，秦誠一

第28回機械材料・材料加工技術講演会  2020.11.19  日本機械学会機械材料・材料加工部門

　More details

Event date： 2020.11

Language：Japanese   Presentation type：Oral presentation (general)  

Ti-Ni-Cu高成形性形状記憶合金のソフトアクチュエータへの基礎検討

浅井 泰平，青山 椋佑，岡智絵美，櫻井淳平，秦誠一

第28回機械材料・材料加工技術講演会  2020.11.19  日本機械学会機械材料・材料加工部門

　More details

Event date： 2020.11

Language：Japanese   Presentation type：Oral presentation (general)  

二層構造を有した手術シミュレータ用血管モデルの作製

山田 大地，堀 史門，山崎貴大，岡智絵美，櫻井淳平，秦誠一

第28回機械材料・材料加工技術講演会  2020.11.19  日本機械学会機械材料・材料加工部門

　More details

Event date： 2020.11

Language：Japanese   Presentation type：Oral presentation (general)  

高効率長寿命FABガンの開発 Invited

秦　誠一

接合界面創成技術委員会第29回研究会  2020.11.19  接合界面創成技術委員会

　More details

Event date： 2020.11

Language：Japanese   Presentation type：Oral presentation (invited, special)  

Country：Japan  

Plasma analysis of the FAB source for the SAB process by PIC-MCC simulation International conference

R. Morisaki, T. Hirai, T. Takahashi, H. Tsuji, N. Ohno, Takahiro Yamazaki, Chiemi Oka, Junpei Sakurai, Seiichi Hata

33rd International Microprocesses and Nanotechnology Conference  2020.11.9 

　More details

Event date： 2020.11

Language：English   Presentation type：Oral presentation (general)  

材料創製・加工技術で拓くマイクロ・ナノの世界 Invited

秦　誠一

長野県精密加工技術研究会　令和２年度技術講演会  2020.11.2  長野県精密加工技術研究会

　More details

Event date： 2020.11

Language：Japanese   Presentation type：Oral presentation (invited, special)  

Country：Japan  

Ti-Ni-Cu高成形性形状記憶合金を用いた，反力可変受動形触覚ディスプレイ用触知ピンの作製

南原 圭汰，伊木 啓一郎，岡智絵美，櫻井淳平，秦誠一

日本機械学会2020年度年次大会  2020.9.13  日本機械学会

　More details

Event date： 2020.9

Language：Japanese   Presentation type：Oral presentation (general)  

Venue：名古屋   Country：Japan  

磁性ナノ粒子の発熱を利用した新規マイクロバルブの作製

三輪 大貴，岡智絵美，櫻井淳平，秦誠一

日本機械学会2020年度年次大会  2020.9.13  日本機械学会

　More details

Event date： 2020.9

Language：Japanese   Presentation type：Oral presentation (general)  

Venue：名古屋   Country：Japan  

プラズマ解析による表面活性化接合用FAB源の高性能化

森崎 諒，平井 隆巳，高橋 知典，辻 裕之，大野 哲靖，岡智絵美，櫻井淳平，秦誠一

日本機械学会2020年度年次大会  2020.9.13  日本機械学会

　More details

Event date： 2020.9

Language：Japanese   Presentation type：Oral presentation (general)  

Venue：名古屋   Country：Japan  

テクスチャ基板による色素増感太陽電池における変換効率への影響

西保 裕司，楊 娜，岡智絵美，櫻井淳平，秦誠一

日本機械学会2020年度年次大会  2020.9.13  日本機械学会

　More details

Event date： 2020.9

Language：Japanese   Presentation type：Oral presentation (general)  

Venue：名古屋   Country：Japan  

手術シミュレータ用3次元次元応力測定系の開発

山田 大地，堀 史門，山崎貴大，岡智絵美，櫻井淳平，秦誠一

日本機械学会2020年度年次大会  2020.9.13  日本機械学会

　More details

Event date： 2020.9

Language：Japanese   Presentation type：Oral presentation (general)  

Venue：名古屋   Country：Japan  

機能性薄膜のコンビナトリアル探索とセンサ応用 Invited

秦　誠一

新化学技術推進協会 電子情報技術部会 ナノフォトニクスエレクトロニクス交流会　講演会  2020.2.25  新化学技術推進協会 電子情報技術部会 ナノフォトニクスエレクトロニクス交流会

　More details

Event date： 2020.2

Language：Japanese   Presentation type：Oral presentation (invited, special)  

マルチスケール、マルチマテリアル3D造形技術とCOMSOLへの期待 Invited

秦　誠一

COMSOL CONFERENCE 2016 

　More details

Event date： 2016.12

Language：Japanese   Presentation type：Oral presentation (general)  

Venue：東京   Country：Japan  

フェムト秒レーザ還元直接描画法による非平面基板上への温度センサ作製

伊藤恭章，溝尻瑞枝，櫻井淳平，秦誠一

第2回日本機械学会イノベーション講演会 

　More details

Event date： 2016.11

Language：Japanese   Presentation type：Oral presentation (general)  

Venue：早稲田大学   Country：Japan  

Fabrication of Ni/Cr2O3 Composite Microstructures Using Femtosecond Laser Reductive Sintering of NiO/Cr Mixed Nanoparticles International conference

Kenki Tamura,Mizue Mizoshiri, Junpei Sakurai, Seiichi Hata

29th International Microprocesses and Nanotechnology Conference(MNC2016) 

　More details

Event date： 2016.11

Language：English   Presentation type：Oral presentation (general)  

Venue：Kyoto   Country：Japan  

フェムト秒レーザ還元焼結を用いたNi合金微細パターン作製

田村健紀，溝尻瑞枝，櫻井淳平，秦誠一

第33回「センサ・マイクロマシンと応用システム」シンポジウム 

　More details

Event date： 2016.10

Language：Japanese   Presentation type：Oral presentation (general)  

Venue：平戸   Country：Japan  

新奇金属系マイクロマシン・センサ材料とその微細加工 Invited

秦　誠一，溝尻瑞枝，櫻井淳平

「センサ・マイクロマシンと応用システム」シンポジム 

　More details

Event date： 2016.10

Language：Japanese   Presentation type：Oral presentation (general)  

Venue：平戸   Country：Japan  

リアルメカトロニクスを目指すマルチマテリアル・マルチスケール３Ｄ造形技術 Invited International conference

秦　誠一

第65回高分子討論会 

　More details

Event date： 2016.9

Language：Japanese   Presentation type：Oral presentation (general)  

Venue：神奈川   Country：Japan  

フェムト秒レーザ還元直接描画法による非平面基板上へのCu微細構造形成

伊藤恭章，溝尻瑞枝，櫻井淳平，秦誠一

日本機械学会2016年度年次大会 

　More details

Event date： 2016.9

Language：Japanese   Presentation type：Oral presentation (general)  

Venue：九州大学   Country：Japan  

フェムト秒レーザ還元直接描画法による3次元微細Cuパターンの積層造形

荒金駿，溝尻瑞枝，櫻井淳平，秦誠一

日本機械学会2016年度年次大会 

　More details

Event date： 2016.9

Language：Japanese   Presentation type：Oral presentation (general)  

Venue：九州大学   Country：Japan  

Three-dimensional Cu micropatterns fabricated using femtosecond laser-induced CuO nanoparticle reduction International conference

Shun Arakane, Mizue Mizoshiri, Junpei Sakurai, Seiichi Hata

10th International Conference on Photoexcited Processes and Applications 

　More details

Event date： 2016.8 - 2016.9

Language：English   Presentation type：Oral presentation (general)  

Venue：Brasov   Country：Romania  

Femtosecond laser-induced reductive sintering to fabricate Ni-based alloy micropatterns International conference

Kenki Tamura, Mizue Mizoshiri, Junpei Sakurai, Seiichi Hata

10th International Conference on Photoexcited Processes and Applications 

　More details

Event date： 2016.8 - 2016.9

Language：English   Presentation type：Oral presentation (general)  

Venue：Brasov   Country：Romania  

イノベーションを如何に起こすか？～マルチマテリアル３D造形を例として～ Invited

秦　誠一

ナノ物質集積複合化技術研究会 

　More details

Event date： 2016.7

Language：Japanese   Presentation type：Oral presentation (general)  

Venue：名古屋   Country：Japan  

フェムト秒レーザ還元直接描画法を用いた金属微細パターニングとその応用 Invited

溝尻瑞枝，秦　誠一

（社）溶接学会第114回マイクロ接合研究委員会 

　More details

Event date： 2016.7

Language：Japanese   Presentation type：Oral presentation (general)  

Venue：京都   Country：Japan  

金属酸化物ナノ微粒子を用いたフェムト秒レーザー還元直接描画法 Invited

溝尻瑞枝，秦　誠一

展示会OPIE'16＆月刊オプトロニクス　連動特別講演会 

　More details

Event date： 2016.5

Language：Japanese   Presentation type：Oral presentation (general)  

Venue：パシフィコ横浜   Country：Japan  

Spray-coating of CuO nanoparticles for femtosecond laser reduction patterning on nonplanar substrates International conference

Yasuaki Ito, Mizue Mizoshiri, Junpei Sakurai, Seiichi Hata

The Second Smart Laser Processing Conference 2016 (SLPC2016) 

　More details

Event date： 2016.5

Language：English   Presentation type：Oral presentation (general)  

Venue：Yokohama   Country：Japan  

Cu micropatterning on poly(dimethylsiloxane) using femtosecond laser reduction of CuO nanoparticles International conference

Mizue Mizoshiri, Yasuaki Ito, Junpei Sakurai, Seiichi Hata

The Second Smart Laser Processing Conference 2016 (SLPC2016) 

　More details

Event date： 2016.5

Language：English   Presentation type：Oral presentation (general)  

Venue：Yokohama   Country：Japan  

機械と電気の真の融合を目指した新しい微細加工技術

秦　誠一

第５回集積化MEMS技術研究ワークショップ  

　More details

Event date： 2014.7

Language：Japanese   Presentation type：Oral presentation (invited, special)  

Venue：豊橋技術科学大学   Country：Japan  

Fe-Ni-Cr系磁歪材料のコンビナトリアル探索とその磁歪特性評価

前谷卓哉，中光豊，桜井淳平，中川茂樹，秦　誠一

日本機械学会 2013年度年次大会 

　More details

Event date： 2013.9

Language：Japanese   Presentation type：Oral presentation (general)  

Venue：岡山大学   Country：Japan  

マイクロアクチュータを使用した薄膜金属材料疲労試験

YapJeng Hua，佐藤康平，Tamjidi Nastaran，桜井淳平，中光豊，秦　誠一

日本機械学会 2013年度年次大会 

　More details

Event date： 2013.9

Language：Japanese   Presentation type：Oral presentation (general)  

Venue：岡山大学   Country：Japan  

金属ガラス厚膜微細構造体の新しい微細加工法

秦　誠一

粉体粉末冶金協会講演　平成２４年度秋季大会 

　More details

Event date： 2012.11

Language：Japanese   Presentation type：Oral presentation (general)  

Venue：滋賀・立命館大学びわこ・くさつキャンパス　エポック立命２１   Country：Japan  

Material search in the age of AI applying microfabrication Invited

HATA Seiichi

The Proceedings of Mechanical Engineering Congress, Japan  2021  The Japan Society of Mechanical Engineers

　More details

Language：Japanese   Presentation type：Oral presentation (invited, special)  

<p>In this paper, it is reviewed that combinatorial technologies for the fabrication and characterization of a large number of samples at once, the use of MEMS and other microfabrication technologies for the characterization of the samples, and our efforts to use machine learning to analyze and improve the search efficiency of the large number of sample data obtained by the combinatorial technologies. We introduce combinatorial arc plasma deposition, which enables the combinatorial deposition of amorphous alloy materials. The composition-graded films fabricated by this method are separated and labeled into thin-film libraries by using microfabrication methods, and their properties are evaluated using MEMS structures. As an example of material search with the aid of machine learning, we describe the identification of physical properties with high contribution to the current density of electrocatalysts by random forest analysis, the examination of search termination conditions by Bayesian optimization, and the estimation of crystal grain size of magnetic materials from Barkhausen noise by machine learning.</p>

DOI： 10.1299/jsmemecj.2021.k041-01

CiNii Research

機械と電気の真の融合を目指した新しい微細加工技術 International conference

秦 誠一

第５回集積化MEMS技術研究ワークショップ  2014.7.11  応用物理学会集積化MEMS技術研究会

　More details

Language：Japanese   Presentation type：Oral presentation (invited, special)  

Venue：豊橋技術科学大学  

researchmap

28pm3-F-7 Fabrication of thin-film thermoelectric generator with CuO-based anti-reflection structures

Kondo Tasuku, Mizoshiri Mizue, Mikami Masashi, Itou Yoshitaka, Sakurai Junpei, Hata Seiichi

The Proceedings of the Symposium on Micro-Nano Science and Technology  2015  The Japan Society of Mechanical Engineers

　More details

Language：Japanese   Presentation type：Oral presentation (general)  

A thin-film thermoelectric generator with anti-reflection structures was fabricated to convert near-infrared solar light, which cannot be converted to electric energy by photovoltaic conversion, to electric energy. The anti-reflection structures were designed using Rigorous Coupled Wave Analysis, resulting that the anti-reflection structures which were formed by close-packed SiO_2 microspheres with 200 nm diameter and coated with CuO thin films estimated to be 6.7%. The anti-reflection structures were formed onto the SiO_2 glass substrate by dip coating method. When the SiO_2 microspheres were dispersed into deionized water and amphiphilic block copolymer F-127, the hexagonally close-packed microspheres were formed on the substrate by dip coating. Bi_<0.5>Sb_<1.5>Te_3 (p-type) and Bi_2Te_<2.7>Se_<0.3> (n-type) thin film elements were formed onto the glass substrate by lithography and sputtering method and serially connected by Cu thin films. After SiO_2 thin-film over-coating the thermoelectric elements, CuO-based anti-reflection structures were successfully formed onto the hot side of the generators.

DOI： 10.1299/jsmemnm.2015.7._28pm3-f-7

CiNii Research

635 Moisture-in-oil sensor using NFTS deposition

YOSHII Yusuke, NAKAMITSU Yutaka, MUKAI Nobuyuki, MIZOGUTI Takashi, TAKAHASHI Tsutomu, HATA Seiichi

The Proceedings of the Materials and processing conference  2013  The Japan Society of Mechanical Engineers

　More details

Language：Japanese   Presentation type：Oral presentation (general)  

DOI： 10.1299/jsmemp.2013.21._635-1_

CiNii Research

634 Fabrication and evaluation of thin-film thermoelectric solar power generator

MIZOSHIRI Mizue, MIKAMI Masashi, OZAKI Kimihiro, SHIKIDA Mitsuhiro, HATA Seiichi

The Proceedings of the Materials and processing conference  2013  The Japan Society of Mechanical Engineers

　More details

Language：Japanese   Presentation type：Oral presentation (general)  

We fabricated thin-film thermoelectric generators and evaluated their generation properties using focused solar light Thin-film thermoelectric elements of Bi_<0.5>Sb_<1.5>Te_<0.3> (p-type) and Bi_2Te_<2.7>Se_<0.3> (n-type), were deposited on glass substrates by radiofrequency magnetron sputtering, and patterned using lift-off techniques After patterning the module, annealing treatment was carried out in a vacuum at 300℃ for 1 h Solar light was focused onto the hot side of the thin-film thermoelectric module with 10 pn junctions using convex lens The focal spot was approximately 2 mm with solar concentration of 156 suns The temperature difference between the hot and cold sides of pn junctions was approximately 90℃ Under this condition, the open circuit voltage and maximum generation power were 245 mV and 1.2 μW, respectively This value of the open circuit voltage of the module was consistent with the calculated value using Seebeck coefficient of thermoelectric thin films and the temperature difference of the module

DOI： 10.1299/jsmemp.2013.21._634-1_

CiNii Research

632 Novel evaluation method for machinability of Ni-Nb-Ti alloy

JIANG Shengxian, SAKURAI Junpei, AONO Yuko, HATA Seiichi

The Proceedings of the Materials and processing conference  2013  The Japan Society of Mechanical Engineers

　More details

Language：Japanese   Presentation type：Oral presentation (general)  

Abstract As mold material for glass lens with microstructures, it requires not only excellent mechanical properties, high thermal stability and oxidation resistance, but also satisfying machinability Using combinatorial arc plasma deposition, Ni-Nb-Ti thin film libraries were deposited for evaluations of some properties, such as, crystallization temperature, thermal stabilities, hardness, oxidation resistance and so on When Ni within 40-58 at %, Nb within 24-46 at %, Ti within 5-20 at %, the thin film exhibited excellent thermal stability However, for machinability, the conventional method can measure only one composition at each time which is both time-consuming and expensive Therefore, a novel combinatorial deposition and evaluation method for machinability are proposed In those methods, thin film samples with concentrically grading composition are sputter - deposited using combination targets The sample has grading compositions of which in the center Ti content is rich and becomes gradually decreasing from center to edge This means that each position on the surface of sample represents a particular composition Then this sample will be cut at different positions After that, cutting depth and the roughness of cutting surfaces will be measured It is clearly to see this new method is more efficient than conventional method, which is able to measure a lot of compositions' machinability at one time with one sample

DOI： 10.1299/jsmemp.2013.21._632-1_

CiNii Research

29pm1-B-4 Fabrication of Cu2O-rich micro-temperature sensor using direct femtosecond laser reduction patterning

Itou Yasuaki, Mizoshiri Mizue, Arakane Shun, Sakurai Junpei, Hata Seiichi

The Proceedings of the Symposium on Micro-Nano Science and Technology  2015  The Japan Society of Mechanical Engineers

　More details

Language：Japanese   Presentation type：Oral presentation (general)  

Micro-temperature sensors consisting of Cu_2O-rich sensing part and Cu-rich electrodes were fabricated using femtosecond laser induced reduction of CuO nanoparticles. Cu_2O-rich and Cu-rich microstructures were selectively formed by controlling laser irradiation conditions. When the laser scanning pitch was 10 μm, Cu_2O-rich microstructures were formed under the condition that the laser scanning speed and pulse energy were 1 mm/s and 0.45 nJ, respectively. Cu-rich microstructures were fabricated by the scanning speed of 10 mm/s and the pulse energy of 0.28 nJ. The Cu_2O-rich sensing part and Cu-rich electrodes were formed using the evaluated conditions. The micro-temperature sensors composed of Cu_2O-rich and Cu-rich hybrid structures were successfully obtained.

DOI： 10.1299/jsmemnm.2015.7._29pm1-b-4

CiNii Research

Cu micropatterning on poly(dimethylsiloxane) using femtosecond laser reduction of CuO nanoparticles

Mizue Mizoshiri, Yasuaki Ito, Junpei Sakurai, Seiichi Hata

The Second Smart Laser Processing Conference 2016 (SLPC2016)  2016.5.17 

　More details

Language：English   Presentation type：Oral presentation (general)  

Venue：Yokohama  

researchmap

金属ガラス厚膜微細構造体の新しい微細加工法 International conference

秦 誠一

粉体粉末冶金協会講演 平成２４年度秋季大会  2012.11.20  粉体粉末冶金協会

　More details

Language：Japanese   Presentation type：Oral presentation (general)  

Venue：滋賀・立命館大学びわこ・くさつキャンパス エポック立命２１  

researchmap

新奇金属系マイクロマシン・センサ材料とその微細加工 Invited International conference

秦 誠一, 溝尻瑞枝, 櫻井淳平

「センサ・マイクロマシンと応用システム」シンポジム  2016.10.24  日本機械学会

　More details

Language：Japanese   Presentation type：Oral presentation (general)  

Venue：平戸  

researchmap

リアルメカトロニクスを目指すマルチマテリアル・マルチスケール３Ｄ造形技術 Invited

秦 誠一

第65回高分子討論会  2016.9.14  高分子学会

　More details

Language：Japanese   Presentation type：Oral presentation (general)  

Venue：神奈川  

researchmap

マルチスケール、マルチマテリアル3D造形技術とCOMSOLへの期待 Invited International conference

秦 誠一

COMSOL CONFERENCE 2016  2016.12.9  計測エンジニアリング社

　More details

Language：Japanese   Presentation type：Oral presentation (general)  

Venue：東京  

researchmap

マイクロアクチュータを使用した薄膜金属材料疲労試験 International conference

YapJeng Hua, 佐藤康平, Tamjidi Nastaran, 桜井淳平, 中光豊, 秦 誠一

日本機械学会 2013年度年次大会  2013.9.8 

　More details

Language：Japanese   Presentation type：Oral presentation (general)  

Venue：岡山大学  

researchmap

フェムト秒レーザ還元直接描画法を用いた金属微細パターニングとその応用 Invited International conference

溝尻瑞枝, 秦 誠一

（社）溶接学会第114回マイクロ接合研究委員会  2016.7.22  （社）溶接学会マイクロ接合研究委員会

　More details

Language：Japanese   Presentation type：Oral presentation (general)  

Venue：京都  

researchmap

フェムト秒レーザ還元直接描画法による非平面基板上への温度センサ作製 International conference

伊藤恭章, 溝尻瑞枝, 櫻井淳平, 秦誠一

第2回日本機械学会イノベーション講演会  2016.11.23 

　More details

Language：Japanese   Presentation type：Oral presentation (general)  

Venue：早稲田大学  

researchmap

フェムト秒レーザ還元直接描画法による非平面基板上へのCu微細構造形成 International conference

伊藤恭章, 溝尻瑞枝, 櫻井淳平, 秦誠一

日本機械学会2016年度年次大会  2016.9.11 

　More details

Language：Japanese   Presentation type：Oral presentation (general)  

Venue：九州大学  

researchmap

フェムト秒レーザ還元直接描画法による3次元微細Cuパターンの積層造形 International conference

荒金駿, 溝尻瑞枝, 櫻井淳平, 秦誠一

日本機械学会2016年度年次大会  2016.9.11 

　More details

Language：Japanese   Presentation type：Oral presentation (general)  

Venue：九州大学  

researchmap

フェムト秒レーザ還元焼結を用いたNi合金微細パターン作製 International conference

田村健紀, 溝尻瑞枝, 櫻井淳平, 秦誠一

第33回「センサ・マイクロマシンと応用システム」シンポジウム  2016.10.24 

　More details

Language：Japanese   Presentation type：Oral presentation (general)  

Venue：平戸  

researchmap

イノベーションを如何に起こすか？～マルチマテリアル３D造形を例として～ Invited International conference

秦 誠一

ナノ物質集積複合化技術研究会  2016.7.29  ナノ物質集積複合化技術研究会

　More details

Language：Japanese   Presentation type：Oral presentation (general)  

Venue：名古屋  

researchmap

Three-dimensional Cu micropatterns fabricated using femtosecond laser-induced CuO nanoparticle reduction

Shun Arakane, Mizue Mizoshiri, Junpei Sakurai, Seiichi Hata

10th International Conference on Photoexcited Processes and Applications  2016.8.29 

　More details

Language：English   Presentation type：Oral presentation (general)  

Venue：Brasov  

researchmap

金属酸化物ナノ微粒子を用いたフェムト秒レーザー還元直接描画法 Invited International conference

溝尻瑞枝, 秦 誠一

展示会OPIE'16＆月刊オプトロニクス 連動特別講演会  2016.5.18  オプトロニクス社

　More details

Language：Japanese   Presentation type：Oral presentation (general)  

Venue：パシフィコ横浜  

researchmap

Spray-coating of CuO nanoparticles for femtosecond laser reduction patterning on nonplanar substrates

Yasuaki Ito, Mizue Mizoshiri, Junpei Sakurai, Seiichi Hata

The Second Smart Laser Processing Conference 2016 (SLPC2016)  2016.5.17 

　More details

Language：English   Presentation type：Oral presentation (general)  

Venue：Yokohama  

researchmap

Femtosecond laser-induced reductive sintering to fabricate Ni-based alloy micropatterns

Kenki Tamura, Mizue Mizoshiri, Junpei Sakurai, Seiichi Hata

10th International Conference on Photoexcited Processes and Applications  2016.8.29 

　More details

Language：English   Presentation type：Oral presentation (general)  

Venue：Brasov  

researchmap

Fe-Ni-Cr系磁歪材料のコンビナトリアル探索とその磁歪特性評価 International conference

前谷卓哉, 中光豊, 桜井淳平, 中川茂樹, 秦 誠一

日本機械学会 2013年度年次大会  2013.9.8 

　More details

Language：Japanese   Presentation type：Oral presentation (general)  

Venue：岡山大学  

researchmap

Fabrication of Ni/Cr2O3 Composite Microstructures Using Femtosecond Laser Reductive Sintering of NiO/Cr Mixed Nanoparticles

Kenki Tamura, Mizue Mizoshiri, Junpei Sakurai, Seiichi Hata

29th International Microprocesses and Nanotechnology Conference(MNC2016)  2016.11.8 

　More details

Language：English   Presentation type：Oral presentation (general)  

Venue：Kyoto  

researchmap