論文 - 社本 英二
-
Analysis and Improvement of Motion Accuracy of Hydrostatic Feed Table 査読有り
Eiji Shamoto, Chun-Hong Park, Toshimichi Moriwaki
Annals of the CIRP 50 巻 ( 1 ) 頁： 285-290 2001年8月
-
Resent Development in Ultraprecision Machining and Machine Tool Technology 招待有り 査読有り
Toshimichi Moriwaki and Eiji Shamoto
International seminar on precision engineering and micro technology (Euspen) 頁： 161-170 2000年7月
-
Prediction of Shear Angle in Oblique Cutting with Maximum Shear Stress and Minimum Energy Principles 査読有り
Eiji Shamoto and Yusuf Altintas
Trans. ASME Journal of Manufacturing Science and Engineering 1 巻 ( 121 ) 頁： 399-407 1999年8月
-
Ultraprecision Ductile Cutting of Glass by Applying Ultrasonic Elliptical Vibration Cutting 査読有り
Eiji Shamoto, Chun-Xiang Ma and Toshimichi Moriwaki
Proc. of 1st International Conference and general meeting of the European Society for Precision Engineering and Nanotechnology (EUSPEN) 頁： 408-411 1999年5月
-
Regenerative Chatter Suppression in Turning by Applying Ultrasonic Elliptical Vibration 査読有り
C. Ma, E. Shamoto, B. Sattayawuthiphong, T. Moriwaki
Memoirs of Graduate School of Science & Technology, Kobe Univ 17 巻 ( A ) 頁： 47-62 1999年3月
-
楕円振動切削加工法(第2報) －振動条件の影響に関する検討 査読有り Open Access
社本 英二，森本 祥之，森脇 俊道
精密工学会誌 65 巻 ( 3 ) 頁： 411-417 1999年3月
-
A Study on Evaluation of Physical Activity in Relation to Body Fat 査読有り
Chikako Matsuda, Eiji Shamoto, Toshimichi Moriwaki, Norimasa Misaki
Memoirs of Graduate School of Science & Technology, Kobe Univ 17 巻 ( A ) 頁： 63-69 1999年3月
-
Analysis of Thermal Deformation of an Ultraprecision Air Spindle System 査読有り
Toshimichi Moriwaki, Eiji Shamoto
Annals of the CIRP 47 巻 ( 01 ) 頁： 315-319 1998年8月
-
Development of an Intelligent Turning Machine Equipped with Open-Architecture CNC Controller to Compensate Thermal Deformation of Machine Tool 査読有り
Toshimichi MORIWAKI, Rei HINO, Noritaka FUJIMURA,Eiji SHAMOTO, Hidetaka SHIBATA and Masayuki NASHIKI
Proceedings of the International Seminar on Improving Machine Tool Performance 頁： 317-332 1998年7月
-
Intelligent Tool Condition Monitoring for Milling 査読有り
Toshimichi Moriwaki and Eiji Shamoto
CIRP Journal of Manufacturing Systems 27 巻 ( 3 ) 頁： 327-332 1998年
-
ヤリの弾性を考慮に入れたやり投げの力学的解析 査読有り Open Access
前田 正登，野村 治夫，社本 英二，森脇 俊道
体育学研究 42 巻 ( 4 ) 頁： 270-282 1997年12月
-
Prediction of Thermal Deformation of Machine Tool with Strain Sensor 査読有り
Toshimichi Moriwaki, Eiji Shamoto, Masahiro Kawano
1997 ASME International Mechanical Engineering Congress & Exposition MED-Vol.6-1, Manufacturing Science and Technology 1 巻 頁： 137-142 1997年11月
-
周囲気温変化による超精密工作機械の熱変形－伝達関数による熱変形特性の検討とたたみこみ積分による推定 査読有り Open Access
森脇 俊道，社本 英二，徳永 剛志
日本機械学会論文集Ｃ編 63 巻 ( 615 ) 頁： 4025-4030 1997年11月
-
Prediction of Shear Angle in Oblique Cutting with Maximum Shear Stress and Minimum Energy Principles 査読有り
Eiji Shamoto and Yusuf Altintas
1997 ASME International Mechanical Engineering Congress & Exposition, MED-Vol.6-1, Manufacturing Science and Technology 1 巻 頁： 121-128 1997年11月
-
Rigid XYθ table for Ultraprecision Machine Tool Driven by Means of Walking Drive 査読有り
Eiji Shamoto and Toshimichi Moriwaki
Annals of the CIRP 46 巻 ( 1 ) 頁： 301-304 1997年8月
-
Coupling Mechanism for High Precision Feed Table with Ballscrew 査読有り
Chun-hong Park, Toshimichi Moriwaki and Eiji Shamoto
Proc. of JSME Centennial Grand Congress, Int. Conf. on Manuf. Milestones toward the 21st Century MM21 頁： 139-143 1997年7月
-
Ultraprecision Diamond Cutting of Die Steel by Applying Ultrasonic Elliptical Vibration Cutting 査読有り
Eiji Shamoto, Toshimichi Moriwaki and Makoto Matsuo
International Conference and Exhibition on Design and Production of Dies and Molds 頁： 105-110 1997年6月
-
Intelligent Tool Condition Monitoring for Milling 査読有り
Toshimichi Moriwaki and Eiji Shamoto
29th CIRP Int. Seminar on Manufacturing Systems 頁： 287-292 1997年5月
-
Ultraprecision Continuous Path Control for Walking Drive 査読有り
Eiji Shamoto and Toshimichi Moriwaki
Proc. of 9th Int. Precision Engineering Seminar / 4th Int. Conf. on Ultraprecision in Manufacturing Engineering 12 巻 頁： 484-487 1997年5月
-
Ultraprecision Continuous Path Control for Walking Drive 査読有り
Eiji Shamoto and Toshimichi Moriwaki
Progress in Precision Engineering and Nanotechnology, Proc. of 9th Int. Precision Engineering Seminar / 4th Int. Conf. on Ultraprecision in Manufacturing Engineering 頁： 484-487 1997年5月