Papers - HIEDA Junko
-
Color-Changing Paper: Cellulose Nanofiber Films Incorporating Mechanochromic Fluorenylidene-Acridane Reviewed
Ogumi, K; Arakawa, T; Okudera, B; Takimoto, Y; Nagata, K; Mishiba, K; Abe, E; Ueno, T; Hieda, J; Omote, K; Lin, HS; Matsuo, Y
ACS APPLIED ENGINEERING MATERIALS Vol. 2 ( 2 ) page： 397 - 403 2024.1
-
Preparation of Titanium-Calcium Alloy Films and Evaluation of Hydroxyapatite Formation Ability Reviewed
Hieda, J; Kato, A; Kuroyanagi, H
MATERIALS TRANSACTIONS Vol. 64 ( 12 ) page： 2801 - 2807 2023.12
-
Investigation of the sulfonation mechanism by gas-liquid interfacial plasma under atmospheric pressure conditions Reviewed International coauthorship International journal
Deng, SQ; Takeuchi, N; Hieda, J; Takahashi, K; Tachibana, K; Li, OL
JOURNAL OF PHYSICS D-APPLIED PHYSICS Vol. 55 ( 34 ) 2022.8
-
Synthesis of poly(<i>N</i>-isopropylacrylamide) by plasma-in-liquid process Reviewed International journal
Hieda, J; Nakashima, H; Hirano, M
JAPANESE JOURNAL OF APPLIED PHYSICS Vol. 60 ( 4 ) page： 046004-1 - 046004-6 2021.4
-
Relationships between surface energy and charge of surface-modified titanium and HAp formation Reviewed
Hieda Junko, Sakaguchi Akira, Nakano Masayuki, Akasaka Hiroki, Ohtake Naoto
APPLIED SURFACE SCIENCE Vol. 465 page： 509 - 516 2019.1
-
Effect of Si incorporation on corrosion resistance of hydrogenated amorphous carbon film Reviewed
Jumpei Nishikawa, Naoki Sugihara, Masayuki Nakano, Junko Hieda, Naoto Ohtake, Hiroki Akasaka
Diamond & Related Materials Vol. 90 page： 207 - 213 2018.11
-
ホウ素添加DLC膜の合成とその摩擦磨耗特性及び血液適合性評価 Invited
稗田純子, シャヒラ リザ カミス, 赤坂大樹, 大竹尚登
セラミックデータブック 2017/18 (工業と製品) Vol. 45 ( 99 ) page： 156-159 2017.12
-
Nemoto Shimpei, Ueno Tomonaga, Watthanaphanit Anyarat, Hieda Junko, Bratescu Maria Antoaneta, Saito Nagahiro
JAPANESE JOURNAL OF APPLIED PHYSICS Vol. 56 ( 9 ) 2017.9
-
Crystallinity and surface state of cellulose in wet ball-milling process
Nemoto Shimpei, Ueno Tomonaga, Watthanaphanit Anyarat, Hieda Junko, Saito Nagahiro
JOURNAL OF APPLIED POLYMER SCIENCE Vol. 134 ( 22 ) 2017.6
-
逆ミセル構造を利用するソリューションプラズマ合成ナノカーボンの比表面積制御 Reviewed
森下哲典, 上野智永, 吉田彰仁, 稗田純子, 齋藤永宏
表面技術 Vol. 68 ( 3 ) page： 153–157 2017.3
-
ソリューションプラズマを用いて作製した酸化亜鉛ナノ粒子の粒径に及ぼすプラズマ生成パラメータの影響 Reviewed
根本心平, 上野智永, Anyarat Watthanaphanit, 稗田純子, 齋藤永宏
表面技術 Vol. 68 ( 3 ) page： 147–152 2017.3
-
Deposition of boron doped DLC films on TiNb and characterization of their mechanical properties and blood compatibility Reviewed
Shahira Lisa, Junko Hieda, Hiroki Akasaka, Naoto Ohtake, Yusuke Tsutsumi, Akiko Nagai, Takao Hanawa
Science and Technology of Advanced Materials Vol. 18 ( 1 ) page： 76–87 2017.1
-
Fastest Formation Routes of Nanocarbons in Solution Plasma Processes Reviewed
Tetsunori Morishita, Tomonaga Ueno, Gasidit Panomsuwan, Junko Hieda, Akihito Yoshida, Maria Antoaneta Bratescu, Nagahiro Saito
Scientific Reports Vol. 6 page： 36880 2016.11
-
DFT calculation of oxygen adsorption on a core-single shell ZnNb catalyst Reviewed
Tetsunori Morishita, Tomonaga Ueno, Gasidit Panomsuwan, Junko Hieda, Maria Antoaneta Bratescu, Nagahiro Saito
RSC ADVANCES Vol. ６ ( 100 ) page： 98091–98095 2016.9
-
Differences in intermediate structures and electronic states associated with oxygen adsorption onto Pt, Cu, and Au clusters as oxygen reduction catalysts Reviewed
Tetsunori Morishita, Tomonaga Ueno, Gasidit Panomsuwan, Junko Hieda, Maria Antoaneta Bratescu, Nagahiro Saito
Vol. 49 ( 41 ) page： 415305 2016.8
-
Adhesive strength of bioactive oxide layers fabricated on TNTZ alloy by three different alkali-solution treatments Reviewed
Eri Takematsu, Ken Cho, Junko Hieda, Masaaki Nakai, Ken-ichi. Katsumata, Kiyoshi Okada, Mitsuo Niinomi, Nobuhiro Matsushita
Journal of the Mechanical Behavior of Biomedical Materials Vol. 61 page： 174–181 2016.8
-
Evaluation of Adhesion of Hydroxyapatite Films Fabricated on Biomedical β-Type Titanium Alloy after Immersion in Ringer's Solution Reviewed
Junko Hieda, Mitsuo Niinomi, Masaaki Nakai, Ken Cho, Ayaka Matsubara
Vol. 56 ( 10 ) page： 1703–1710 2015.9
-
In vitro biocompatibility of Ti-Mg alloys fabricated by direct current magnetron sputtering Reviewed
Junko Hieda, Mitsuo Niinomi, Masaaki Nakai, Ken Cho
Materials Science and Engineering: C Vol. 54 page： 1-7 2015.9
-
Dependence of ion concentration in simulated body fluid on apatite precipitation on titania surface Reviewed
Akira Sakaguchi, Masayuki Nakano, Junko Hieda, Naoto Ohtake, Hiroki Akasaka
Applied Surface Science Vol. 347 page： 610–618 2015.8
-
Microstructural evolution of precipitation-hardened beta-type titanium alloy through high-pressure torsion Reviewed
Yilmazer Hakan, Mitsuo niinomi, Ken Cho, Masaaki Nakai, Junko Hieda, S. Sato, Yoshikazu Todaka
Vol. 80 page： 172-182 2014.11
-
Mechanical Properties, Microstructures, and Biocompatibility of Low-Cost β-Type Ti-Mn Alloys for Biomedical Application Reviewed
Ken Cho, Mitsuo Niinomi, Masaaki Nakai, Junko Hieda, Pedro Fernandes Santos, Yoshinori Itoh, Masahiko Ikeda
Biomaterials Science: Processing, Properties and Applications IV: Ceramic Transactions Vol. 251 page： 21-30 2014.9
-
Bending springback behavior related to deformation-induced phase transformations in Ti-12Cr and Ti-29Nb-13Ta-4.6Zr alloys for spinal fixation applications Reviewed
Huihong Liu, Mitsuo Niinomi, Masaaki Nakai, Junko Hieda, Ken Cho
Journal of the Mechanical Behavior of Biomedical Materials Vol. 34 page： 66-74 2014.7
-
Changeable Young's modulus with large elongation-to-failure in beta-type titanium alloys for spinal fixation applications Reviewed
Huihong Liu, Mitsuo Niinomi, Masaaki Nakai, Junko Hieda, Ken Cho
Scripta Materialia Vol. 82 page： 29–32 2014.7
-
Hardening behavior after high-temperature solution treatment of Ag-20Pd-12Au-xCu alloys with different Cu contents for dental prosthetic restorations Reviewed
Yonghwan Kim, Mitsuo Niinomi, Junko Hieda, Masaaki Nakai, Ken Cho, Hisao Fukui
Journal of the Mechanical Behavior of Biomedical Materials Vol. 35 page： 123-131 2014.7
-
Biomedical polymer surface modification of beta-type titanium alloy for implants through anodic oxide nanostructures Reviewed
Junko Hieda, Mitsuo Niinomi, Masaaki Nakai, Ken Cho
Materials Science Forum Vol. 783-786 page： 1261–1264 2014.5
-
Contribution of β' and β precipitates to hardening in as-solutionized Ag-20Pd-12Au-14.5Cu alloys for dental prosthesis applications Reviewed
Yonghwan Kim, Mitsuo Niinomi, Junko Hieda, Masaaki Nakai, Ken Cho, Hisao Fukui
Materials Science and Engineering C Vol. 37 page： 204–209 2014.4
-
Precipitation of β' phase and hardening in dental-casting Ag-20Pd-12Au-14.5Cu alloys subjected to aging treatments Reviewed
Yonghwan Kim, Mitsuo Niinomi, Junko Hieda, Masaaki Nakai, Ken Cho, Hisao Fukui
Materials Science & Engineering C Vol. 36 page： 329–335 2014.3
-
Adhesive strength of medical polymer on anodic oxide nanostructures fabricated on biomedical β-type titanium alloy Reviewed
Junko Hieda, Mitsuo Niinomi, Masaaki Nakai, Ken Cho, Tomoyoshi Mohri, Takao Hanawa
Materials Science and Engineering: C Vol. 36 page： 244–251 2014.3
-
MECHANICAL PROPERTIES OF BIOMEDICAL β-TYPE TITANIUM ALLOY WITH RARE-EARTH METAL OXIDE PARTICLES FORMED BY RARE-EARTH METAL ADDITION Reviewed
Junko Hieda, Mitsuo Niinomi, Masaaki Nakai, Ken Cho
TMS 2014 143rd Annual Meeting & Exhibition, Annual Meeting Supplemental Proceedings page： 129-135 2014.2
-
Deformation-induced changeable Young's modulus with high strength in beta-type Ti-Cr-O alloys for spinal fixture Reviewed
Huihong Liu, Mitsuo Niinomi, Masaaki Nakai, Junko Hieda, Ken Cho
Journal of the Mechanical Behavior of Biomedical Materials Vol. 30 page： 205-213 2014.2
-
Reduction in anisotropy of mechanical properties of coilable (α+β)-type titanium alloy thin sheet through simple heat treatment for use in next-generation aircraft applications Reviewed
Masaaki Nakai, Mitsuo Niinomi, Junko Hieda, Ken Cho, Yuya Nagasawa, Takashi Konnno, Yoshinori Ito, Yoshio Itsumi, Hideto Oyama
Materials Science and Engineering: A Vol. 594 page： 103-110 2014.1
-
A review of surface modification of a novel low modulus β-type titanium alloy for biomedical applications Reviewed
Mitsuo Niinomi, Masaaki Nakai, Junko Hieda, Ken Cho, Toshihiro Kasuga, Tomokazu Hattori, Takashi Goto, Takao Hanawa
International Journal of Surface Science and Engineering Vol. 8 ( 2-3 ) page： 138-152 2014
-
Mechanical properties of biomedical beta-type titanium alloy with rare-earth metal oxide particles formed by rare-metal addition Reviewed
Junko Hieda, Mitsuo Niinomi, Masaaki Nakai, Ken Cho
Supplemental UE: TMS 2014 Conference Proceedings page： 129-135 2014
-
Functionalization of Multiwalled Carbon Nanotubes by Solution Plasma Processing in Ammonia Aqueous Solution and Preparation of Composite Material with Polyamide 6 Reviewed
Vol. 52 ( 12 ) page： 125101 2013.12
-
Improvement of Tensile and Fatigue Properties of beta-Titanium Alloy while Maintaining Low Young's Modulus through Grain Refinement and Oxygen Addition Reviewed
Ken Cho, Mitsuo Niinomi, Masaaki Nakai, Junko Hieda, Ryota Kanekiyo
MATERIALS TRANSACTIONS Vol. 54 ( 10 ) page： 2000-2006 2013.10
-
Effect of Oxide Particles Formed through Addition of Rare-Earth Metal on Mechanical Properties of Biomedical β-Type Titanium Alloy Reviewed
Junko Hieda, Mitsuo Niinomi, Masaaki Nakai, Ken Cho
Materials Transactions Vol. 54 ( 8 ) page： 1361-1367 2013.8
-
Deformation-induced ω phase in modified Ti-29Nb-13Ta-4.6Zr alloy by Cr addition Reviewed
Qiang Li, Mitsuo Niinomi, Junko Hieda, Masaaki Nakai, Ken Cho
Acta Biomaterialia Vol. 9 ( 8 ) page： 8027–8035 2013.8
-
Effects of Alloying Elements on the HAp Formability on Ti Alloys after Alkali Treatment Reviewed
Ken Cho, Mitsuo Niinomi, Masaaki Nakai, Junko Hieda, Xiaojie Tao
Materials Transactions Vol. 54 ( 8 ) page： 1295-1301 2013.8
-
Mechanical properties of a medical beta-type titanium alloy with specific microstructural evolution through high-pressure torsion Reviewed
Hakan Yilmazer, Mitsuo Niinomi, Masaaki Nakai, Ken Cho, Junko Hieda, Yoshikazu Todaka, T. Miyazaki
Materials Science and Engineering: C Vol. 33 ( 5 ) page： 2499-2507 2013.7
-
Improvement of adhesive strength of segmented polyurethane on Ti-29Nb-13Ta-4.6Zr alloy through H2O2 treatment for biomedical applications Reviewed
Junko Hieda, Mitsuo Niinomi, Masaaki Nakai, Hiroyuki Kamura, Harumi Tsutsumi, Takao Hanawa
Journal of Biomedical Materials Research Part B: Applied Biomaterials Vol. 101B ( 5 ) page： 776-783 2013.7
-
Heterogeneous grain refinement of biomedical Ti-29Nb-13Ta-4.6Zr alloy through high-pressure torsion Reviewed
Masaaki Nakai, Mitsuo Niinomi, Junko Hieda, Hakan Yilmazer, Yoshikazu Todaka
Scientia Iranica Vol. 20 ( 3 ) page： 1067-1070 2013.6
-
Development of High Modulus Ti-Fe-Cu Alloys for Biomedical Applications Reviewed
Ken Cho, Niinomi Mitsuo, Masaaki Nakai, Junko Hieda, Yuuki Kawasaki
Materials Transactions Vol. 54 ( 4 ) page： 574-581 2013.3
-
Enhancement of adhesive strength of hydroxyapatite films on Ti-29Nb-13Ta-4.6Zr by surface morphology control Reviewed
Junko Hieda, Mitsuo Niinomi, Masaaki Nakai, Ken Cho, Tatsuya Gozawa, Hirokazu Katsui, Rong Tu, Takashi Goto
Journal of the Mechanical Behavior of Biomedical Materials Vol. 18 page： 232-239 2013.2
-
Tensile and Fatigue Properties of Carbon-Solute-Strengthened (α+β)-Type Titanium Alloy Reviewed
Masaaki Nakai, Mitsuo Niinomi, Junko Hieda, Ken Cho, Toshikazu Akahori, Kazuhiro Hayashi, Yoshio Itsumi, Shogo Murakami, Hideto Oyama
Materials Transactions Vol. 54 ( 2 ) page： 169-175 2013.1
-
Specific characteristics of mechanically and biologically compatible titanium alloy rods for use in spinal fixation applications Reviewed
Kengo Narita, Mitsuo Niinomi, Masaaki Nakai, Junko Hieda, Kazuya Oribe
Materials Letters Vol. 86 page： 178-181 2012.11
-
Effects of solidification and solution treatment at high temperature on precipitation behavior of β phase of dental casting Au-Ag-Pd alloy Reviewed
Toyohiko Sugimura, Hisao Fukui, Mitsuo Niinomi, Toshikazu Akahori, Masaaki Nakai, Junko Hieda, Yonghwan Kim
The Journal of the Japanese Society for Dental Materials and Devices Vol. 31 ( 6 ) page： 531-537 2012.11
-
Development of new metallic alloys for biomedical applications Invited Reviewed
Mitsuo Niinomi, Masaaki Nakai, Junko Hieda
Acta Biomaterialia Vol. 8 page： 3888-3903 2012.11
-
Microstructures and Mechanical Properties of Ternary Ti-10Cr-(V, Fe, Mo) Alloys with Self-tunable Young's Moduli for Biomedical Applications Reviewed
Masaaki Nakai, Mitsuo Niinomi, Junko Hieda, Toshiya Shibata
ISIJ International Vol. 52 ( 9 ) page： 1655-1660 2012.9
-
Effect of Deformation-Induced omega Phase on the Mechanical Properties of Metastable beta-Type Ti-V Alloys Reviewed
Xingfeng Zhao, Mitsuo Niinomi, Masaaki Nakai, Junko Hieda
Materials Transactions Vol. 53 ( 8 ) page： 1379-1384 2012.8
-
Optimization of Cr content of metastable β-type Ti-Cr alloys with changeable Young's modulus for spinal fixation applications Reviewed
Xingfeng Zhao, Mitsuo Niinomi, Masaaki Nakai, Junko Hieda, Takuya Ishimoto, Takayoshi Nakano
Acta Biomaterialia Vol. 8 ( 6 ) page： 2392-2400 2012.7
-
Heterogeneous structure and mechanical hardness of biomedical β-type Ti-29Nb-13Ta-4.6Zr subjected to high-pressure torsion Reviewed
Hakan Yilmazer, Mitsuo Niinomi, Masaaki Nakai, Junko Hieda, Yoshikazu Todaka, Toshikazu Akahori, T. Miyazaki
Journal of the Mechanical Behavior of Biomedical Materials Vol. 10 page： 235-245 2012.6
-
Preparation and wettability examinations of transparent SiO2 binder-added MgF2 nanoparticle coatings covered with fluoro-alkyl silane self-assembled monolayer Reviewed
Tsuyoshi Murata, Junko Hieda, Nagahiro Saito, Osamu Takai
Applied Optics Vol. 51 ( 13 ) page： 2298-2305 2012.5
-
Development of thermo-mechanical processing for fabricating highly durable β-type Ti-Nb-Ta-Zr rod for use in spinal fixation devices Reviewed
Kengo Narita, Mitsuo Niinomi, Masaaki Nakai, Junko Hieda, Kazuya Oribe
Journal of the Mechanical Behavior of Biomedical Materials Vol. 9 page： 207-216 2012.5
-
Beta type Ti-Mo alloys with changeable Young's modulus for spinal fixation applications Reviewed
Xingfeng Zhao, Mitsuo Niinomi, Masaaki Nakai, Junko Hieda
Acta Biomaterialia Vol. 8 ( 5 ) page： 1990-1997 2012.5
-
Formation of L10-type ordered β' phase in as-solutionized dental Ag-Pd-Au-Cu alloys and hardening behavior Reviewed
Yonghwan Kim, Mitsuo Niinomi, Junko Hieda, Masaaki Nakai, Hisao Fukui
Materials Science and Engineering C Vol. 32 ( 3 ) page： 503-509 2012.4
-
Young's modulus changeable β-type binary Ti-Cr alloys for spinal fixation applications Reviewed
Xingfeng Zhao, Mitsuo Niinomi, Masaaki Nakai, Junko Hieda
the special volume of "Materials Integration" in Key Engineering Materials Vol. 508 page： 117-123 2012.3
-
Effect of terminal functional groups of silane layers on adhesion strength between biomedical Ti-29Nb-13Ta-4.6Zr alloy and segment polyurethanes Reviewed
Junko Hieda, Mitsuo Niinomi, Masaaki Nakai, Hiroyuki Kamura, Harumi Tsutsumi, Takao Hanawa
Surface and coatings technology Vol. 206 ( 13 ) page： 3137-3141 2012.2
-
Microstructural change of β' phase and hardness change in as-solutionized dental Ag-20Pd-12Au-14.5Cu alloy Reviewed
Yonghwan Kim, Mitsuo Niinomi, Junko Hieda, Masaaki Nakai, Hisao Fukui
the special volume of "Materials Integration" in Key Engineering Materials Vol. 508 page： 166-171 2012.2
-
Difference of Microstructure and Fatigue Properties between Forged and Rolled Ti-6Al-4V Reviewed
Yoon Seok Lee, Mitsuo Niinomi, Masaaki Nakai, Junko Hieda, Takashi Maeda, Yoshihisa Shirai, Ikuhiro Inagaki
the special volume of "Materials Integration" in Key Engineering Materials Vol. 508 page： 161-165 2012.2
-
Microstructure and mechanical properties of a biomedical β- type titanium alloy subjected to severe plastic deformation after aging treatment Reviewed
Hakan Yilmazer, Miitsuo Niinomi, Masaaki Nakai, Junko Hieda, Toshikazu Akahori, Yoshikazu Todaka
the special volume of "Materials Integration" in Key Engineering Materials Vol. 508 page： 152-160 2012.2
-
Effects of Solidification Structure and Heat Treatment on Hardness of Commercial Dental Casting Au-Ag-Pd Alloys Reviewed
Toyohiko Sugimura, Hisao Fukui, Kentaro Kaikawa, Mitsuo Niinomi, Toshikazu Akahori, Masaaki Nakai, Junko Hieda
The Journal of the Japanese Society for Dental Materials and Devices Vol. 30 ( 6 ) page： 410-417 2011.11
-
Corrosion resistance and chemical stability of super-hydrophobic film deposited on magnesium alloy AZ31 by microwave plasma-enhanced chemical vapor deposition Reviewed
Takahiro Ishizaki, Junko Hieda, Nagahiro Saito, Naobumi Saito, Osamu Takai
Electrochem. Acta Vol. 55 page： 7094-7101 2010
-
Solution Plasma Surface Modification for Nanocarbon-Composite Materials Reviewed
Junko Hieda, Tatsuru Shirafuji, Yohei Noguchi, Nagahiro Saito, and Osamu Takai
Vol. 73 ( 12 ) page： 938-942 2009
-
*Synthesis Process of Gold Nanoparticles in Solution Plasma Reviewed
N. Saito, J. Hieda and O. Takai
Thin Solid Films Vol. 518 page： 912–917 2009
-
*Size-regulated Gold Nanoparticles Fabricated by a Discharge in Reverse Micelle Solutions Reviewed
J. Hieda, N. Saito, O. Takai
Surface & Coatings Technology Vol. 202 page： 5343-5346 2008
-
*Exotic shapes of gold nanoparticles synthesized using plasma in aqueous solution Reviewed
J. Hieda, N. Saito, O. Takai
The Journal of Vacuum Science and Technology A Vol. 26 page： 854-856 2008
-
*Reaction Dynamics for Gold Nanoparticles Synthesis in Solution Plasma Reviewed
J. Hieda, N. Saito, O. Takai
Mater. Res. Soc. Symp. Proc. Vol. 1056 page： 1056-HH03-39 2008
-
Atmospheric plasma-calcination of mesoporous tungsten oxide utilizing Reviewed
P. Baroch, J. Hieda, N. Saito, O. Takai
Thin Solid Films Vol. 515 page： 4905–4908 2007
-
Surface potential reversibility of an amino-terminated self-assembled monolayer based on nanoprobe chemistry Reviewed
N. Saito, S.H. Lee, T. Ishizaki, J. Hieda, H. Sugimura, O. Takai
J. Phys. Chem. B. Vol. 109 page： 11602-11605 2005
-
Fabrication of a built-in patterned metal microstructure on a polymer substrate using a microstructured organic monolayer template Reviewed
N. Saito, J. Hieda, O. Takai
Electrochem. Solid-State Lett. Vol. 7 page： C140-C141 2005
-
*自己組織化単分子膜を利用した選択的無電解めっきによるメタルパターンの作製とポリマー上への転写 Reviewed
稗田純子, 齋藤永宏, 太田理一郎, 高井治
表面技術 Vol. 56 page： 113-117 2005