研究者詳細 - 小橋　眞

論文 - 小橋　眞

分割表示 305 件中 121 - 140 件目／全件表示 >>

レーザ積層造形技術が生み出すアルミニウム合金造形体の特異な組織形成

91 巻 ( 9 ) 頁： 612 - 617 2019年9月

レーザ積層造形技術が生み出すアルミニウム合金造形体の特異な組織形成

91 巻 ( 9 ) 頁： 612 - 617 2019年9月

CaH2還元によるSiO2被覆Feナノ粒⼦の合成と磁気特性

66 巻 ( 9 ) 頁： 429 - 433 2019年9月

CaH2還元によるSiO2被覆Feナノ粒⼦の合成と磁気特性

66 巻 ( 9 ) 頁： 429 - 433 2019年9月

Microstructure and cracking behavior of hydroxide films formed on aluminum-alloy sheets prepared by steam coating

Li, HM; Takata, N; Kobashi, M; Serizawa, A

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING 764 巻 2019年9月

Joining of metals and polymers using powder metallurgy with laser irradiation

Kim, SG; Suzuki, A; Takata, N; Kobashi, M

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY 270 巻頁： 1 - 7 2019年8月

Design of laser parameters for selectively laser melted maraging steel based on deposited energy density

Suzuki, A; Nishida, R; Takata, N; Kobashi, M; Kato, M

ADDITIVE MANUFACTURING 28 巻頁： 160 - 168 2019年8月

Formation of Fe2Al5 Phase Layer on Fe-Si Alloy Sheets Hot-Dipped in Zn-0.2Al Alloy Melt

Takata, N; Hayano, K; Suzuk, A; Kobashi, M

TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN 105 巻 ( 7 ) 頁： 701 - 708 2019年7月

Formation sequence of Fe-Al intermetallic phases at interface between solid Fe and liquid Zn-6Al-3Mg alloy

Yokoi, H; Takata, N; Suzuki, A; Kobashi, M

INTERMETALLICS 109 巻頁： 74 - 84 2019年6月

Effect of powder blending ratio on porous structure formed by combustion synthesis reaction between Ni and Al together with space holder 査読有り

Yunmao Shu, Asuka Suzuki, Naoki Takata, Makoto Kobashi

Journal of Functionally Graded Materials 33 巻頁： 38 - 43 2019年5月

ろう付用Al–Si系合金材を用いたポーラスアルミニウムの接合におけるポーラスアルミニウムの気孔構造変化と液相の挙動

69 巻 ( 2 ) 頁： 93 - 100 2019年2月

ろう付用Al–Si系合金材を用いたポーラスアルミニウムの接合におけるポーラスアルミニウムの気孔構造変化と液相の挙動

69 巻 ( 2 ) 頁： 93 - 100 2019年2月

Fabrication of porous NiAl intermetallic compounds with a hierarchical open-cell structure by combustion synthesis reaction and space holder method 査読有り

Shu, YM; Suzuki, A; Takata, N; Kobashi, M

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY 264 巻頁： 182 - 189 2019年2月

Transmission Electron Microscopic Observation of Layered Double Hydroxide Films Formed on Aluminum Alloys Prepared by Steam Coating Process

Takata, N; Li, H; Kobashi, M; Shimada, Y; Serizawa, A; Ishizaki, T

TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN 105 巻 ( 2 ) 頁： 177 - 182 2019年2月

記述言語：日本語出版者・発行元：一般社団法人日本鉄鋼協会

Microstructures and crystallographic features of layered double hydroxide (LDH) particles and the LDH film formed on the aluminum alloy sheet (alloy 7075) using the steam coating process were examined by transmission electron microscopy (TEM). The LDH powder particles exhibited a hexagonal-disc-shape morphology. Their disc plane and side planes were parallel to a basal plane and prism planes of the LDH hexagonal crystal, respectively. A cross-sectional thin TEM sample was prepared from the interface between the LDH film and the Al alloy substrate using a focused ion beam combined with pick-up technique. TEM observations revealed that the LDH film formed on the Al alloy exhibited a dual-layer structure, which consists of a continuous Zn-rich amorphous layer (including numerous nano-particles with fcc structure) on the Al substrate side and a LDH layer composed of a number of disc-shaped LDH particles.

DOI： 10.2355/tetsutohagane.TETSU-2018-064

Web of Science

CiNii Books

researchmap

Synthesis of porous Al/Al3Ti composite with hierarchical open-cell structure for combining with phase change material 査読有り

Suzuki, A; Miyake, S; Naruse, W; Takata, N; Kobashi, M

JOURNAL OF ALLOYS AND COMPOUNDS 770 巻頁： 1100 - 1111 2019年1月