Papers - KOBASHI, Makoto
-
Producing Technology of Aluminum Foam from Machined Chip Waste Reviewed
Vol. 47 ( 9 ) page： 2125-2130 2006.9
-
Fabrication of TiB2/Cu composites and simultaneous bonding with aluminum alloy using combustion reaction Reviewed
Y.J.Kwon, M. Kobashi, N.Kanetake
Vol. 70 ( 01 ) page： 34-42 2006.1
-
Innovative processing of porous and cellular materials by chemical reaction Reviewed
N. Kanetake, M. Kobashi
Scripta Materialia Vol. 54 page： 521-525 2006
-
Microstructure Refinement of Al-Si alloy Using Compression Torsion Processing Reviewed
Y.KumeM. KobashiN.Kanetake
Mater. Sci. Forum Vol. 519-521 page： 1441-1446 2006
-
Self-Blowing Process of Al Foam Assisted by Exothermic Reaction Reviewed
M.Kobashi, N.Kanetake
Mater. Sci. Forum Vol. 519-521 page： 1335-1340 2006
-
Cell structure control of porous titanium composite synthesized by combustion reaction Invited Reviewed
N. Kanetake, K. Kuze, M. Kobashi
Advanced Engineering Materials Vol. 8 ( 9 ) page： 836-840 2006
-
ポーラス金属の現状と今後の展開 Invited Reviewed
小橋 眞
軽金属 Vol. 55 ( 7 ) page： 327-332 2005
-
Effect of Powder Blending Ratio on Pore Morphology of Combustion Processed Al-Ni Foams
R.Wang, M.Kobashi, N.Kanetake
Advanced Materials Research Vol. 16-18 page： 53-56 2005
-
Foaming Behavior of Precursors Made of Various Kinds of Al Alloy Powder
M.Ohta, M. Kobashi N. Kanetake
Vol. 4 page： 111-114 2005
-
Effects of Processing Parameters on Pore Morphology of Combustion Synthesized Al-Ni Foams
N. Kanetake, M.Kobashi, R.X.Wang
Vol. 4 page： 177-180 2005
-
Technology of Producing Aluminum Foam from Machined Chips
S. Tsuda M. Kobashi N. Kanetake
Vol. 4 page： 337-340 2005
-
Fabrication of copper matrix composites and simultaneous bonding with aluminum alloy using combustion reaction of Cu-Ti-B system
Y.J.kwon, M.Kobashi, N.Kanetake
Mater. Trans. Vol. 45 ( 11 ) page： 3163-3171 2004.11
-
燃焼合成と溶湯撹拌の組合せによるTiC粒子強化アルミニウム複合材料の作製
尾村直樹、 小橋 眞、 金武直幸
日本金属学会誌 Vol. 68 ( 6 ) page： 367-371 2004.6
-
燃焼合成と溶湯撹拌の組合せによるTiC/6061アルミニウム合金複合材料の作製
尾村直樹、 小橋 眞、 金武直幸
日本金属学会誌 Vol. 68 ( 4 ) page： 211-215 2004.4
-
Fabrication and simultaneous bonding of metal matrix composite by combustion synthesis reaction
Y.J.kwon, M.Kobashi, N.Kanetake
Scripta Mater. Vol. 50 page： 577-581 2004
-
Al-TiH2混合粉末プリカーサの加熱によるポーラスアルミニウムの発泡過程
小橋 眞、 棚橋伸也、 金武直幸
軽金属 Vol. 53 ( 10 ) page： 427-432 2003.10
-
Formability of AZ91D alloy by casting-forging process
T.Mohri, T.Nishiwaki. M.Kobashi, N.Kanetake
Mater. Sci. Forum Vol. 419 ( 4 ) page： 377-381 2003
-
反応浸透法によるTiC粒子強化アルミニウム複合材料の作製
尾村直樹、 小橋 眞、 長 隆郎、 金武直幸
日本金属学会誌 Vol. 66 ( 12 ) page： 1317-1324 2002.12
-
Fabrication of TiB2/Al composites by combustion synthesis of Al-Ti-B system
Y.J.Kwon, M.Kobashi, T.Choh, N.Kanetake
Vol. 43 ( 11 ) page： 2796-2801 2002.11
-
Processing of Intermetallics Foam by Combustion Reaction
M.Kobashi, N.Kanetake
Advanced Engineering Materials Vol. 4 ( 10 ) page： 745-747 2002.10