研究者詳細 - 内山　知実

論文 - 内山　知実

分割表示 297 件中 221 - 240 件目／全件表示 >>

卓上型エアカーテン装置によるエアロゾル粒子の遮断および捕集性能

高牟礼光太郎, 小林大亮, 武藤広将, 春木健杜, 天野浩, 八木哲也, 岩谷靖雅, 内山知実

流体工学部門講演会講演論文集 2022 巻 ( 0 ) 頁： OS03-22 2022年

深紫外線LEDを搭載したつづら折り流路を通過するウイルスの壁面付着および不活化性能

高牟礼光太郎, 岩谷靖雅, 坂本恭晃, 八木哲也, 天野浩, 内山知実

年次大会 2022 巻 ( 0 ) 頁： S055-11 2022年

呼気中のエアロゾルを遮断するデスクトップ型エアカーテン装置の開発

高牟礼光太郎, 坂本恭晃, 八木哲也, 岩谷靖雅, 天野浩, 内山知実

年次大会 2022 巻 ( 0 ) 頁： S055-10 2022年

Falling behavior of hollow particle with uniaxial through-hole: A case study using experiments and numerical simulations

Takamure, K; Tanaka, J; Kato, H; Uchiyama, T

POWDER TECHNOLOGY 392 巻頁： 367 - 374 2021年11月

記述言語：英語掲載種別：研究論文（学術雑誌）出版者・発行元：Powder Technology

In this study, experiments and numerical simulations are performed where a hollow particle with a uniaxial through–hole is dropped freely in water, and its behavior is investigated. The distribution of falling particle trajectories reveals significant deviation in the direction perpendicular to the through–hole of the particle. In addition, the pressure distribution at the particle surface and the vorticity field of the wake of the particle are distributed asymmetrically in the plane perpendicular to the through–hole of the particle. Conversely, this pressure distribution and vorticity field are distributed symmetrically with respect to the direction parallel to the through–hole of the particle. Thus, this study clarifies that the movement of the particle in the direction parallel to the through–hole is suppressed. These results provide valuable novel insights into the control of particle motion.

DOI： 10.1016/j.powtec.2021.07.020

Web of Science

Scopus

Effect of Froude number on the motion of a spherical particle launched vertically upward in water

Takamure, K; Uchiyama, T

EXPERIMENTAL THERMAL AND FLUID SCIENCE 128 巻 2021年10月

記述言語：英語掲載種別：研究論文（学術雑誌）出版者・発行元：Experimental Thermal and Fluid Science

A spherical particle with a diameter of 25.4 mm and density of 2640 kg/m3 was launched vertically upward toward the free surface of calm water. The Froude number of the particle passing through the water surface was varied. The dependence of the Froude number on the particle motion and water surface behavior was investigated from the instant the particle crossed the water surface until it attained its maximum displacement position. Based on the classical energy conservation law, the energy lost in the interaction between the particle and water surface (i.e., interface containing energy, Eo) was estimated. Eo was found to increase with the increase in the Froude number when the particle crossed the water surface. In addition, owing to Eo at the maximum displacement position of the spherical particle, the height and width of the interfacial water sheet changed by the same ratio at the point of intersection of the upper side of the particle with the calm water surface. This result was in agreement with that obtained by changing the submergence depth, as reported by Takamure and Uchiyama (2020). This finding suggests that the characteristics of the interfacial water sheet are the dominant parameters influencing the interface containing energy. The presented findings can help determine the parameters to model the water exit problem.

DOI： 10.1016/j.expthermflusci.2021.110453

Web of Science

Scopus

Behavior of a solid sphere launched vertically upwards in water and its interaction with the air-water interface

Takamure K., Uchiyama T.

OCEAN ENGINEERING 235 巻 2021年9月

記述言語：日本語掲載種別：研究論文（学術雑誌）出版者・発行元：Ocean Engineering

An experiment was conducted in which a solid sphere with a density of 1,875 kg/m3 and diameter of 24.8 mm was launched vertically upwards in water towards the air–water interface. By changing the Reynolds number, Re, based on the launch velocity, the motion of the sphere due to interference with the air–water interface was investigated along with the behavior of the interface. The experimental results of the sphere's vertical position in water agree with the theoretical values. However, in air, the experimental results gave lower vertical positions than the theoretical values. When the Reynolds number where the sphere reaches the air–water interface is Rew1¯=0.2×103, the vertical trajectory of the sphere branches above and below the ensemble average immediately after passing the air–water interface. This difference in bifurcation does not depend on the Reynolds number in water. However, no branching occurs when Rew1¯ is large. There is an inverse relationship between the asymmetry of the air–water interface that occurs when the sphere passes through the interface and the sphere's maximum displacement. It was shown that the energy loss of the sphere and the asymmetry of the air–water interface have a linear relationship in all cases with different Reynolds numbers. This means that there is a invariant relationship between the energy lost by the sphere passing through the air–water interface and the asymmetry of the interface.

DOI： 10.1016/j.oceaneng.2021.109282

Web of Science

Scopus

Falling of a Spherical Particle in Fine-Bubble Plume and Fine-Bubble Behavior around the Particle

Takamure K., Kawasaki Y., Degawa T., Uchiyama T.

FLUID DYNAMICS 56 巻 ( 5 ) 頁： 612 - 621 2021年9月

記述言語：日本語掲載種別：研究論文（学術雑誌）出版者・発行元：Fluid Dynamics

Abstract—: In this study, the interaction between a spherical solid particle descending in a fine-bubble plume and the fine-bubbles around the particle is investigated experimentally. The fine-bubbles, which are formed by water electrolysis and have an average diameter of 0.037 mm, rise via buoyancy to form bubble plumes. The average bubble velocity in the conduit is 0.05 mm/s. A spherical solid particle with a diameter of 11.1 mm and a density of 1130 kg/m3 is dropped into the fully-developed bubble plume. The particle falls in a meandering motion in the fine-bubble plume. In this process, the terminal velocity of the particles falling in the fine-bubble plume is almost identical to that of a particle falling in the quiescent water. Additionally, after the fine-bubbles have been separated from the particle surface, they flow into the wake of the particle, forming a stagnant region. The particle wake diameter increases threefold, as compared with its value in the downstream direction of the fine-bubble plume.

DOI： 10.1134/S001546282105013X

Web of Science

Scopus

Mixing of a two-layer density-stratified fluid by two vortex rings successively launched toward the density interface

Cao, LL; Takamure, K; Degawa, T; Uchiyama, T

JOURNAL OF VISUALIZATION 24 巻 ( 4 ) 頁： 683 - 697 2021年8月

記述言語：英語掲載種別：研究論文（学術雑誌）出版者・発行元：Journal of Visualization

Abstract: In this study, two vortex rings composed of upper fluid were continuously ejected vertically downward toward the interface of the two-layer density-stratified fluid. The motion of the vortex rings and behavior of the lower layer fluid were investigated via visualization experiment, and the effect of time interval between the injections of the two vortex rings on the mixing of the density-stratified fluid was investigated. The first emitted vortex ring (VRA) advected vertically downward in the upper layer, passed through the density interface, and then advected in the lower layer. After VRA reached the maximum depth in the lower layer, the upper part of the fluid mass ejected into the upper layer due to buoyancy. The lower fluid was entrained in the upper layer. Subsequently, a new vortex ring (VRC) was generated by the fluid mass ejected in the upper layer and advected vertically upward in the upper layer. The second vortex ring emitted (VRB) collided with the tip of the fluid mass of the VRA ejected from the lower layer. Subsequently, it slightly penetrated the lower layer, rolled up the lower layer fluid into the upper layer, and coalesced with VRC to collapse. In the process of vortex merging, the mixing of the upper and lower layers reached a maximum when the VRA reached the maximum depth. Furthermore, it was clarified that the mixing ability of the upper and lower layers depends on the ejection time interval of the two vortex rings. Graphic abstract: [Figure not available: see fulltext.]

DOI： 10.1007/s12650-020-00738-8

Web of Science

Scopus

Vortex-in-cell simulation of the flow and performance of a Savonius hydraulic turbine with S-shaped blades

Takamure, K; Wang, HT; Uchiyama, T; Iio, S; Ikeda, T

JOURNAL OF RENEWABLE AND SUSTAINABLE ENERGY 13 巻 ( 4 ) 2021年7月

記述言語：英語掲載種別：研究論文（学術雑誌）出版者・発行元：Journal of Renewable and Sustainable Energy

The volume penalization vortex-in-cell (VP-VIC) method, which combines the vortex-in-cell and vortex penalization methods, is a kind of immersed boundary method that has the advantage of accurately calculating the vorticity field near the boundary. It is expected to be used as a design tool for shape optimization. In this study, the flow and performance of a small Savonius turbine rotor (rotor diameter DR = 245 mm) with S-shaped blades, which is used for small-scale distributed power generation with output less than 100 kW, were analyzed by numerical simulation. The results were compared with those of previous experimental studies to examine the usefulness of the VP-VIC method for fluid analysis around the Savonius turbine. The Reynolds number (Re=U0DR/ν) based on the streamwise velocity U0 is 1.32×105. The volume penalization vortex-in-cell (VP-VIC) method is applied for flow simulation, and the rotational motion of the rotor is analyzed using the calculation method previously proposed by the authors for the fluid force acting on the solid boundary (blade surface). As a result, the relationship between the rotational speed of the rotor and the output coefficient obtained in this simulation is similar in the experimental results of Golecha et al. [Appl. Energy 88, 3027-3217 (2011)] using S-shaped blades. In particular, with an increase in the load torque, the rotational speed of the rotor decreases, and the rotor stops momentarily. When the rotor stops, the positive torque of clockwise rotation acts on the advancing blade, while the negative torque of counterclockwise rotation acting on the returning blade decreases; hence, the rotor restarts immediately after stopping. In addition, it is established that the rotor output can be accurately predicted. Based on the above, it is reconfirmed that the VP-VIC method is beneficial for predicting the performance of a Savonius turbine.

DOI： 10.1063/5.0051203

Web of Science

Scopus

Development of a self-powered wireless sensor node to measure the water flowrate by using a turbine flowmeter

Uchiyama, T; Takamure, K; Okuno, Y; Sato, E

INTERNET OF THINGS 13 巻 2021年3月

記述言語：英語掲載種別：研究論文（学術雑誌）出版者・発行元：Internet of Things (Netherlands)

A self-powered wireless sensor node was developed to measure the water flowrate. It is composed of a turbine flowmeter and an IoT control unit. The turbine flowmeter generates electric power from the rotation of the rotor. The IoT control unit, consisting of a microcomputer and a low power wide area (LPWA) communication module, uses the power generated by the rotor rotation to detect the rotational speed of the rotor (the water flowrate) and to communicate wirelessly with a server on the Internet. Experiments were also conducted to evaluate the performance of the sensor node. The power generated by the rotor rotation was sufficient to operate the wireless sensor node as a self-powered unit. The full-scale accuracy and indication accuracy of the measured flowrate were 1.2% and 2.8%, respectively. The wireless sensor node could stably upload the measured flowrate to a server on the Internet.

DOI： 10.1016/j.iot.2020.100327

Web of Science

Scopus

Motion of a Solid Sphere Launched Vertically Upward in Water and Deformation of Water Surface by the Sphere

Takamure K., Uchiyama T.

Lecture Notes in Mechanical Engineering 頁： 159 - 166 2021年

記述言語：日本語掲載種別：研究論文（学術雑誌）出版者・発行元：Lecture Notes in Mechanical Engineering

A solid sphere is launched vertically upward from water toward the air–water interface, and the modulation of the sphere’s motion and the behavior of the air–water interface induced by the sphere are investigated. Spheres with three different densities ρp are used: the almina sphere (ρp = 3900 kg/m3), teflon sphere (ρp = 2180 kg/m3), and duracon sphere (ρp = 1360 kg/m3). Through a visualization experiment on the motion of a sphere in water, it was demonstrated that the launch velocity of the sphere can be set with high accuracy. When the sphere passes through the air–water interface, it forms a complex interface while entraining water. Additionally, spheres with small ρp were demonstrated to not always vertically collide with the air–water interface; this causes different behaviors of the spheres in the air.

DOI： 10.1007/978-981-15-5183-3_17

Scopus

NACA翼形状をもつブレードを用いた電源自立式タービン流量計の発電効率の向上

坂本恭晃, 内山知実, 高牟礼光太郎, 中山浩

流体工学部門講演会講演論文集 2021 巻 ( 0 ) 頁： OS03-15 2021年

縦横比の異なる矩形オリフィスからのキャビテーション噴流の流れ特性

寺川航平, 飯尾昭一郞, 高牟礼光太郎, 内山知実

北陸信越支部総会・講演会　講演論文集 2021.58 巻 ( 0 ) 頁： F021 2021年

縦横比の異なる矩形オリフィスからのキャビテーション噴流の可視化と流量特性

武井裕紀, 寺川航平, 飯尾昭一郎, 高牟礼光太郎, 内山知実, 吉田太志

流体工学部門講演会講演論文集 2021 巻 ( 0 ) 頁： OS03-20 2021年

水中で鉛直上向きに射出した固体球の運動に及ぼす一軸貫通孔の初期角度の影響

高牟礼光太郎, 内山知実

流体工学部門講演会講演論文集 2021 巻 ( 0 ) 頁： OS03-04 2021年

一様流中に置かれた円形の１軸貫通孔を持つ球体の後流特性

加藤颯, 高牟礼光太郎, 内山知実

年次大会 2021 巻 ( 0 ) 頁： S051-09 2021年

タービン流量計を用いた水流量測定のための電源自立型無線センサノードの開発

坂本恭晃, 内山知実, 高牟礼光太郎, 奥野雄太, 佐藤栄一, 中山浩, 長伸朗, 松本博幸

年次大会 2021 巻 ( 0 ) 頁： S144-01 2021年

Effect of density of a sphere launched vertically in water on the water-surface behavior and sphere motion in air

Takamure, K; Uchiyama, T

PHYSICS OF FLUIDS 32 巻 ( 11 ) 2020年11月

記述言語：英語掲載種別：研究論文（学術雑誌）出版者・発行元：Physics of Fluids

Submerged solid spheres with specific gravities relative to water ranging from 1.36 to 7.93 were launched vertically upward toward the free surface of calm water. The motion of each sphere and the behavior of the water surface were investigated from the time the sphere passed through the calm water surface until it attained its maximum displacement position. The energy lost in the interaction between the sphere and the water surface (i.e., the interfacial containing energy Eo) was estimated from energy conservation. A larger Eo at the maximum displacement position of the sphere led to a larger increase in the height and width of the interfacial water sheet where the upper side of the sphere intersected with the free surface of calm water. This result corresponded to the result obtained by changing the submergence depth, as reported by Takamure and Uchiyama ["Air-water interface dynamics and energy transition in air of a sphere passed vertically upward through the interface,"Exp. Therm. Fluid Sci. 118, 110167 (2020)]. This aspect suggests that the characteristics of the interfacial water sheet are the dominant parameters influencing Eo. The presented findings can facilitate the determination of parameters to model the water exit problem.

DOI： 10.1063/5.0024032

Web of Science

Scopus

Dynamics of a sphere launched vertically in water

Takamure, K; Uchiyama, T

POWDER TECHNOLOGY 372 巻頁： 246 - 257 2020年7月

Effect of cylinders on the characteristics of a fine-bubble plume

Takamure K., Degawa T., Kano R., Uchiyama T.

Journal of Fluid Science and Technology 15 巻 ( 3 ) 頁： JFST0019 - JFST0019 2020年

記述言語：日本語掲載種別：研究論文（学術雑誌）出版者・発行元：Journal of Fluid Science and Technology

The characteristics of a fine-bubble plume passing through two tandem cylinders are investigated. Fine-bubbles with a mean diameter of 0.055 mm are released by water electrolysis from electrodes placed at the bottom of a tank. They induce an upward water flow around them with rising due to buoyancy. Orthogonally to the axis of such fine-bubble plume, two cylinders with a diameter D of 30 mm are arranged in tandem. The distance between the cylinders, L, ranges between 1.5D and 3D. This study visualizes the bubbles and water flow around the cylinders. It also measures the bubble velocity distribution. The experiments reveal the water and bubble shear layers originating at the sides of the lower cylinder and make clear their behavior around the upper cylinder. This study elucidates the effects of L on the characteristics of the fine-bubble plume, such as the stagnant bubbly flow and the bubbly wake around the cylinders.

DOI： 10.1299/JFST.2020JFST0019

Scopus

CiNii Research

　前のページ - 次のページ　

<内山 知実>

論文 - 内山 知実

<内山　知実>

論文 - 内山　知実